BMP Hydraulic Motor
Hydraulic Orbit Motor BMP
BMP series motor are small volume, economical type, which is designed with shaft distribution flow, which adapt the Gerotor gear set design and provide compact volume, high power and low weigth. Characteristic Features: * Advanced manufacturing devices for the Gerotor gear set, which provide small volume, high efficiency and long life. * Shaft seal can bear high pressure of motor of which can be used in parallel or series. * Advanced construction design, high power and low weight. |
|
|
|
Code |
|
|
BMP |
|
|
Displacement |
|
|
36 |
|
|
Flange |
|
|
2 |
2-Ø13.5 Rhomb-flange,pilot Ø82.5×8 |
|
4-Ø13.5 Rhomb-flange,pilot Ø82.5×8 |
|
|
H4 |
4-3/8-16 Square-flange,pilot Ø44.4×2.8 |
|
H5 |
4-M10 Square-flange,pilot Ø44.4×2.8 |
|
Output Shaft |
|
|
A |
Shaft Ø25,parallel Key 8x7x32 |
|
B |
Shaft Ø32,parallel Key 10x8x45 |
|
C |
Shaft Ø25.4,parallel Key 6.35x6.35x31.75 |
|
E |
Shaft Ø25.4,splined tooth SAE 6B |
|
R |
Short shaft Ø25.4,parallel key 6.35x6.35x31.75 |
|
F |
Shaft Ø31.75,splined tooth 14-DP12/24 |
|
FD |
Long shaft Ø31.75,splined tooth 14-DP12/24 |
|
G |
Shaft Ø31.75,parallel Key 7.96x7.96x31.75 |
|
T |
Cone-Shaft Ø28.56,parallel Key B5x5x14 |
|
T3 |
Cone shaft Ø31.75,parallel key 7.96x7.96x25.4 |
|
Port and Drain Port |
|
|
D |
G1/2 Manifold Mount 4xM8, G1/4 |
|
M |
M22×1.5 Manifold Mount 4xM8, M14×1.5 |
|
S |
7/8-14 O-ring manifold 4x5/16-18UNC, 7/16-20UNF |
|
P |
1/2-14 NPTF Manifold 4x5/16-18UNC,7/16-20UNF |
|
R |
PT(Rc)1/2 Manifold 4xM8, PT(Rc)1/4 |
|
Rotation Direction |
|
|
Omit |
Standard |
|
R |
Opposite |
|
Paint |
|
|
00 |
No paint |
|
Omit |
Blue |
|
B |
Black |
|
S |
Silver grey |
|
Unusually Function |
|
|
Omit |
Standard |
|
N |
Big radial force |
|
O |
No case drain |
|
F |
Free Running |
|
LS |
Low Speed |
|
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Technical data for BMP with 25 and 1 in and 1 in splined and 28.56 tapered shaft: |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Technical data for BMP with 31.75 and 32 shaftt: |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
* Continuous pressure:Max.value of operating motor continuously. |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Substitute Reference substance
MOTOR CROSS REFERENCE TABLE |
||||||||
|
HANJIU |
M+S |
EATON |
DANFOSS |
ROSS |
WHITE |
PARKER |
SAM |
BOSCH |
|
BMM |
MM MLHK |
J SERIES |
OMM |
BGM |
MGX |
|||
|
BMP/BM1 |
MP HP |
H SERIES |
OMP DH |
MF MG |
WP RS |
TC TE TB |
BG |
MGP GXP |
|
BMR/BM2 |
MR HR MLHRW,RW |
S,T SERIES W SERIES |
OMR DS OMEW |
MB |
WR RE |
TF |
BR |
MGR GMR |
|
BMH/BM4 |
MH MLHH HW HWF |
OMH |
ME |
RE |
TG |
|||
|
BMS/BM5 |
MS MSY MLHS |
2000 SERIES |
OMS |
ME |
RE |
TG |
HPR |
MGS GMS |
|
BMT/BM6 |
MT MLHT MTM |
6000 SERIES |
OMT TMT |
MJ |
HT |
MGT,GMT |
||
|
BMV |
MV MLHV |
10000 SERIES |
OMV |
MGV GMV |
||||
Hydraulic orbit motor applications:
Brush cutters
Mower
Haveresting equipment
Forestry equipment
Turf equipment
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
GPC4 Hydraulic Pump | GPC4series high pressure gear pumpsare one of importedhigh pressure gear pumpswith introduction technology from VICKERS, U.S.A.GPC4series high pres... |
 |
060 Hydraulic Steering Control Unit | Product Description 060 integral series power steering units060 series PSU incorporated the inlet check valve, safety valve, internal check valve, ... |
 |
BMH Hydraulic Motor | Hydraulic Orbit Motor BMH: *Advanced manufacturing devices for the Gerolor gear set, which use low pressure of start-up,provide smooth, reliable o... |
 |
CBG-F3 GEAR PUMP | The features of this CBG-F3 series gear pumps are its drive helical gear and its shaft cover installed with double row angle contact bearing. This ... |
 |
GPC4 GEAR PUMP | GPC4series high pressure gear pumpsare one of importedhigh pressure gear pumpswith introduction technology from VICKERS, U.S.A.GPC4series high pres... |
Похожие товары
 |
C500-1.7 Series High Flow Multi-Stage Centrifugal Blower /Centrifugal Blower | Продавец: Greentech International (Zhangqiu) Co., Ltd | Greentech International (Zhangqiu) Co., Ltdis the professional blower supplier.Multistage Centrif... |
 |
Common Rail injector control valve F00VC01303 | Продавец: China Lutong Part Plant | Common Rail injector control valve F00VC01303 Tina#Stainless Steel Cylindrical Pin##Denso Common... |
 |
Common Rail injector control valve F00VC01200 | Продавец: China Lutong Part Plant | Common Rail injector control valve F00VC01200 Tina#Stainless Steel Cylindrical Pin##Denso Common... |
 |
Injector Control Valve Plate 24# | Продавец: China Lutong Part Plant | Injector Control Valve Plate 24# Tina#Stainless Steel Cylindrical Pin##Denso Common Rail Injecto... |
 |
Injector Control Valve Plate 12# | Продавец: China Lutong Part Plant | Injector Control Valve Plate 12# Tina#Stainless Steel Cylindrical Pin##Denso Common Rail Injecto... |
