RF Admittance Level Switch

Feejoy is very professional industrial instrumentation manufacturer for more than 16 years.Nowadays, it is not an era of lack of suppliers, what is worrying is how to find suitable and reliable ones among various suppliers. Our position is not to win on price, but to win with good quality and reasonable price, to win in the processing technology.we will offer fluid level meter,industrial control and instrumentation,various liquid level sensors types,level gauge indicator,liquid level indicator sensor,level Transmitter,temperature transmitter,rotary paddle Level Switch,vibration Fork Level Switch,submersible Pressure Transmitter and so on.

FEEJOY RF Admittance Level Switchmeasures the medium through high-frequency wireless waves, which is a more advanced RF admittancetechnology to exchange capacitance measurement. The RF type level switch consists of three sensor units: Measuring probe, Shield and Ground terminal. Our FRFS series RF level switch is widely used in the alarm and control of liquid, slurry, material level and two liquid interface levels. Compared with other similar RF admittance level switch products, it has higher system stability and may work reliably even under extremely harsh field conditions. And the RF type level switch is not suffering from the hanging material, temperature, pressure, density, humidity, and even the chemical properties of the fabric.

Features of RF Admittance Level Switch

It can measure the liquid level and material level, and can meet the measurement requirements of different temperatures, pressures, and media.

It is not affected by the rf capacitance level sensorhanging material and does not need to be cleaned regularly to avoid wrong measurement.

There are no moving parts in the measurement process, and there is no problem with damage to mechanical parts.

No maintenance, intelligent adjustment-free.

Contact measurement, strong anti-interference ability, can overcome the influence of steam, foam and stirring on the measurement.

The measurement quantity is diversified, which makes the measurement more accurate, the measurement is not affected by environmental changes, and the stability is high.

Reliable product performance and long service life.

FEEJOY can supply OEM service for RF admittance level switch among all level switches manufacturers, which include material, working pressure, output, etc.

Specification of RF Admittance Level Switch

We can manufacture according to customer's specification kike below:

Product Name	radio frequency admittance fuel level controller
Wetted part Material	SUS304 and SUS 316L
HS Code	9032899090
Working Pressure	Max 3.0 MPa
Process temperature	Max 800 deg c
Output	DPDT relay(double-pole double-throw)
Contact Capacity	220VAC, 5A-no sense, 3A-sense
Response Time
Delay Time
Explosion-proof Grade	Explosion-proof: dIIBT4~T6
Process connection	thread/ flange, etc

Application of RF Admittance Level Switch

Conductive and insulating liquids: Chemical industry, oil field, water and sewage treatment

Conductive and insulating paste: Paper, pharmaceutical, water and sewage treatment

Powder: Ash, powder, Power plant, metallurgy, cement

Particles: coal, grain power, plant, metallurgy, grain

Interface: two different liquids, oil field, chemical industry

The RF admittance level switch is the RF admittance level meter, and the potentiometer W1 of the radio frequency admittance level meter is a sensitivity adjustment potentiometer: the LED two-color display lamp lights in green when there is no material, and the red light when there is one. After the meter is powered on, the green light is on when the level is lower than the set value.

At this time, slowly adjust the potentiometer W1 clockwise until the red light is on, and then adjust it 3 times counterclockwise (0.5 to 3 times for non-conductive materials, conductive material 5 ~ 7 circles) and the green light is on (the status of the output relay's contacts should change with the change of the traffic light display state). According to the measurement part of different RF admittance level transmitters, it should be covered by materials at about 75mm.

Другие товары поставщика

	Temperature Sensor	A high temp pressure transducerrefers to a sensor that can sense temperature and convert it into a usable output signal. The temperature sensor is ...
	Magnetostrictive Level Transmitter	FEEJOY Magnetostrictive Level Transmitter is a very important part of the automatic control system. The magnetostrictive level gauge is a new produ...
	Level Switch	Best Quality Level Switch Manufacturer As one of level switch manufacturers, FEEJOY supplies level switch that is a sensor mainly used for the dete...
	Radar Level Transmitter	The pulse radar level transmitteradopts the microwave pulse measurement method, and can be normal in the industrial frequency band range, the beam ...
	Cable Float Level Switch	The cable float level switch has two chambers, which are completely sealed using a special process when processing the cable float switch. Differen...

Все товары поставщика

Похожие товары

	Beeswax used for candle processing	Продавец: Syntop chemical Co.,Ltd.	The advantages of beeswax candles are quite notable: Natural ingredients: Beeswax is a natural s...
	Greentech GR220 Electric Star Feeder | Rotary Airlock Valve Seals for Pneumatic Conveying Systems 6 Months Warranty 310kg	Продавец: Greentech International (Zhangqiu) Co., Ltd	Customized Support: Tailored solutions for industrial machinery needs. High-Quality Electric P...
	Bottle Cap Mold	Продавец: Taizhou Qihong Mold Co., Ltd.	Bottle Cap Mold is designed for precise and consistent plastic cap production, supporting differe...
	High quality beeswax used in craft production	Продавец: Syntop chemical Co.,Ltd.	Beeswax has a wide range of uses in handicrafts, appearing in everything from traditional candles...
	FT wax used for EVA-based hot melt adhesive	Продавец: Syntop chemical Co.,Ltd.	Fischer-Tropsch wax is a commonly used performance modifier in hot melt adhesives, especially for...