SDS-05535 0.55mm Diameter 35mm Length Glued Steel Fiber
Tengzhou Star smith Metal Products Co., Ltd. (SDS）is one of the top three enterprises specializing in steel fiber production in China and has participated in the construction of national projects several times. Established in 2011, we can provide an annual production scale of up to 10,000 tons of steel fiber for concrete. It mainly produces glued steel fiber, copper-coated micro steel fiber and loose steel fibers.
This kind of steel fiber has the best comprehensive effect, and the best combination of high strength, high flexural strength (more than 10 times continuously) and the strongest anchoring force. It also has good dispersion in concrete. which is widely used in industrial floors, high-way speed, ground, bridge and etc.
The Specification of SDS-05535 0.55mm Diameter 35mm Length Glued Hooked End Steel Fiber
|
Name |
SD-05535 |
|
Type |
Glued |
|
Diameter |
|
|
Length |
35mm |
|
L/D(length/diameter) |
64 |
|
Tensile strength |
>1150Mpa |
|
Application |
shotcrete |
The Advantages of SDS-05535 0.55mm Diameter 35mm Length Glued Hooked End Steel Fiber
Easier operation and improve structural strength;
High toughness and lower thickness and reduce steel reinforcement requirements;
Improve impact and abrasion resistance;
Less time used, and more economical;
Compared with traditional concrete, concrete with glued steel fiber is more economical and efficient.
Steel high performance fibresUSER'S GUIDANCE
Dosage: depend on the application and minimum dosage is 20kg/㎥-70kg/㎥
Mixing: When pouring sand and aggregates into the hopper, mix an appropriate amount of loose steel fibers evenly, and then add cement. Put it in a mixing table, dry and mix for 2 minutes. If it is glued in rows of steel fibers, you need to add steel fibers after adding water so that the water can dissolve the bonding glue.
Put the uniformly mixed fiber concrete into the conveyor and transport.
Concrete pouring and laying should be compacted.
The Safety & Packaging of SDS-05535 0.55mm Diameter 35mm Length Glued Hooked End Steel Fiber
Star Smith is a professional steel fiber manufacturer that can offer a wide range of hooked end steel fiber that meets different needs.
Packaging: 20kg or 25kg per bag/carton or as your requirements, there are 50 bags or 1000kg in a pallet, 24tons per 20'container.
And the pallets should be waterproof, don't stack pallets on top of each other.
Gloves and eye protection should be used when adding the steel fibers.
Now the steel fiber priceis pretty cheap.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Steel Fiber Concrete Reinforcement | Steel fiber reinforced concrete(SFRC) is a kind of heart-shaped composite material with excellent performance and wide application. Steel fiber ret... |
 |
SDS-05035 0.50mm Diameter 35mm Length Glued Steel Fiber | The glued steel fiberare water-soluble with good dispersion in concrete. It is widely used in construction, highway pavement, bridge, tunnel, airpo... |
 |
SDS-05535 0.55mm Diameter 35mm Length Glued Steel Fiber | This kind of steel fiber has the best comprehensive effect, and the best combination of high strength, high flexural strength (more than 10 times c... |
 |
SDS-05530 0.55mm Diameter 30mm Length Glued Steel Fiber | The glued steel fiber has the best comprehensive effect, and the best combination of high strength, high flexural strength (more than 10 times cont... |
 |
SDS Micro Copper Coated Steel Fiber | Micro steel fibers are made of copper micro wire, which is the most important materials of RPC and UHPC. UHPC has the features of very high strengt... |
Похожие товары
 |
FT wax used for EVA-based hot melt adhesive | Продавец: Syntop chemical Co.,Ltd. | Fischer-Tropsch wax is a commonly used performance modifier in hot melt adhesives, especially for... |
 |
high melting point FT wax improve the heat resistance of adhesives | Продавец: Syntop chemical Co.,Ltd. | FischerTropsch wax is an alkane polymer produced from synthesis gas or natural gas via the Fische... |
 |
For hot melt adhesive high melting point FT WAX | Продавец: Syntop chemical Co.,Ltd. | The key advantage of high-melting-point Fischer-Tropsch wax in hot-melt adhesives stems from its ... |
 |
Diesel Injection Delivery Valve 1W6982 | Продавец: China lutong | Diesel Injection Delivery Valve 1W6982 Diesel Injection Delivery Valve 19AChris Diesel Injection... |
 |
High melting point FT wax used as plastic processing additives | Продавец: Syntop chemical Co.,Ltd. | Due to its high purity, low oil content, narrow melting range, high hardness, and excellent therm... |
