FUXI ® FLUOROCARBON PAINT

• 

Under FUXI® brand, Jinhai Special industrial painthas developed our own formulation system, including epoxy, phenolic, alkyd, acrylic, silicone, polyurethane, fluorocarbon, chlorinated rubber, ethylene and other coatings. We keep developing new solvent-free paints, water-based paints and eco-friendly coatings, interior wall paint, polyurethane paint, Solvent-Free Coating, marine grade paint and earnestly fulfil the social responsibility of environmental protection.

The high molecular polymer formed by the polymerization of fluoro olefin or the copolymerization of fluoro olefin and other monomers is fluorocarbon resin. The paint with fluorocarbon resin as the film-forming is fluorocarbon coatingor call PTFE paint. It is with outstanding weather resistance and highly decorative performance, most offluorocarbon coating are used as a topcoat or finish paint for bridge, highway guardrail, high-grade building, petroleum equipment and storage tank.

Precautions for Fluorocarbon PaintConstruction

1. 2. When storing fluorocarbon paint, it is best to store it in a dry and non-sun place to avoid moisture or direct sunlight that will affect the product's service life and effect.3. During construction, paintevenly, avoid sagging or omission, which will affect the appearance.4. When preparing the slurry, the amount should not be too much each time, and the prepared slurry should be used up within 5 hours to avoid invalidation after the activation period.5. When preparing the slurry, a professionaldiluentmust be used for dilution.6. Pay attention to the construction environment, and do not work in rainy, snowyor frosty weather. In addition, it cannot be constructed in an environment with a humidity greater than 80%.7. After the construction is completed, it is necessary to wait 7 days to complete the curing, and it cannot be put into use before this.8. During construction, wear protective equipment, such as eye masks, to prevent the slurry from hurting the eyes. If you accidentally get the slurry, rinse it with clean water and seek medical attention in time.

Fluorocarbon Coating vs Powder Coating

About performance: The performance of fluorocarbon coatings is better than powder coatings, wearproof, weather fastness , UV resistance and resistant to fading. Fluorocarbon spraying is used outdoors, while powder coatings are used indoors.The price of fluorocarbon spraying is about 10,000 per ton higher than powder spraying.About spraying technology: Both powder spraying and fluorocarbon spraying are suitable for assembly line spraying. They bothrequire surface treatment before spraying.But the specific technology has some difference. Fluorocarbon coatingcan be electrostatic spraying or conventional spraying.While electrostatic spraying, friction gun spraying, fluidizedbed spraying and other methods can be used for powder coatings.

Fluorocarbon Coating Process

The pre-treatment before spraying is to remove oil stains and chemical treatment on the surface of the workpiece before spraying the aluminum alloy profile, thereby prolonging the service life of the paint film.

Другие товары поставщика

	Heat Insulation Primer	Heat insulating primeris a two-component coating consisting of thermal insulation resin, anti-rust pigment, solvent and additives. It has good anti...
	Chlorinated Rubber Anticorrosive Primer (Iron Red)	Chlorinated rubber resinis combined with a chlorinated rubber resin, curing agent, pigments, anti-rust pigments, fillers and additives. The film-fo...
	FUXI ® ZINC-RICH PAINT	Zinc powder is the most important electrochemical antirust pigment. A primer made with a large amount of zinc powder is called a zinc-rich primer. ...
	Chlorinated Rubber Asphalt Paint	Chlorinated Rubber Green Asphalt Paint Chlorinated rubber road marking paintis a one-component chlorinated rubber asphalt paint for woodcomposed...
	FUXI ® EPOXY PAINT	Liquid epoxy paintare the most important category of anti-corrosion coating products. They are widely used in: the hull of the ship, deck (in...

Похожие товары

	Candy Seat Sculpture	Продавец: Jiangsu Chuanggeng Arts & Crafts Co., Ltd.	Candy is not only edible but also very practical. We have designed candy as a seat, which can not...
	SASOL C80 used for release agents and lubricants	Продавец: Syntop chemical Co.,Ltd.	In polymer processing, the excellent lubricating properties of C80 SASOLWAX help to improve the p...
	Цифровой контроллер pH и температуры PH-221	Продавец: Коллирон электроникс лимитед	Описание продукта :Большой экран с подсветкой. Он оснащен цифровойкалибровкой для простой и точно...
	TH021W Контроллер температуры и влажности Интернета вещей	Продавец: Коллирон электроникс лимитед	Описание продукта:Этот электронный регулятор температуры можно использовать в различных случаях к...
	PH-018(485) Промышленный онлайн-контроллер PH RS485	Продавец: Коллирон электроникс лимитед	Техническая спецификация: Диапазон рН 0,00 ~ 14,00 рН Темпера...