Low Pressure Dosing Pump

• 

Low pressure dosing systemcan be used on many occasions with strict requirements. Moreover, technological progress, industrial development, and automation equipment have attached great attention. The advantages of the low-pressure dosing system with strong compatibility and wide adaptivity to the medium are very important.

Three Main Aspects Of Low-Pressure Dosing System Selection

lDefine the actual maximum pressure

The pressure of the low-pressure dosing system is slightly higher than the rated pressure, generally higher than 10% to 20%. Over high pressure will waste energy, and it increases equipment investment and operating costs. So, please do not choose over high pressure.

lDefine the flow rate

The flow rate of the selected low-pressure dosing system should be equal to or slightly higher than the required flow rate of the process. The use range of the low-pressure dosing system is 30% to 100% of the rated flow. Taking the economy into consideration, it is recommended that the actual demand of the dosing system is 60% to 80% of the rated flow of the dosing system.

lDefine the pump head material

The specific requirements of the low-pressure dosing system are defined, the selection process of the medium should be based on the flow properties of the material. It is a very important step, if it is not selected properly, it will cause corrosive medium flow passage components, or the leakage of the medium pollutes the damage of the system. Serious accidents can also be caused due to serious situations.

Also, there are other aspects, such as accuracy, the viscosity of the medium, equipment price, after-sales service, etc. There are all factors that need to be considered.

Ark Electric & Mechanical Co., Ltd.is a professional diaphragm metering pump manufacturers, we provide swimming pool dosing pump, metered dose pump, automatic metering pump, single diaphragm dosing pump and etc. Want to know more? Please contact us.

Другие товары поставщика

	D Type Electromagnetic Solenoid Dosing Pump	In the past 20 years, the solenoid driven pumpare the most popular and typical of NEWDOSE products, offer a wide selection of flow rate and pressur...
	Detergent Dosing Pump	We, Ark Electric & Mechanical Co., Ltd., specializes in providing NEWDOSE detergent dosing pump. If the backwash water contains A13+ produced b...
	DFD Type Solenoid Dosing Pump	DFD Type Solenoid Dosing Pump Eccentric shaft is supported by bearings in front and rear and the cantilever shaft structure of the most of manuf...
	Manual Dosing Pump	Manual Dosing Pump Introduction Of Manual Metering Pump The flow rate of the dosing pump manualis constant and can be manually adjusted. The flow ...
	Manual Dosing Pump	Manual Dosing Pump Introduction Of Manual Metering Pump The flow rate of the manual metering pump is constant and can be manually adjusted. The f...

Похожие товары

	FT wax used for EVA-based hot melt adhesive	Продавец: Syntop chemical Co.,Ltd.	Fischer-Tropsch wax is a commonly used performance modifier in hot melt adhesives, especially for...
	high melting point FT wax improve the heat resistance of adhesives	Продавец: Syntop chemical Co.,Ltd.	FischerTropsch wax is an alkane polymer produced from synthesis gas or natural gas via the Fische...
	For hot melt adhesive high melting point FT WAX	Продавец: Syntop chemical Co.,Ltd.	The key advantage of high-melting-point Fischer-Tropsch wax in hot-melt adhesives stems from its ...
	Diesel Injection Delivery Valve 1W6982	Продавец: China lutong	Diesel Injection Delivery Valve 1W6982 Diesel Injection Delivery Valve 19AChris Diesel Injection...
	High melting point FT wax used as plastic processing additives	Продавец: Syntop chemical Co.,Ltd.	Due to its high purity, low oil content, narrow melting range, high hardness, and excellent therm...