Halogen-Free PCB

ZF Electronics is a China Shenzhen-based printed circuit board assembly manufacturerand PCB assembler. Shenzhen has been the world's center of electronics R&D and manufacturing for decades. By skipping all the middle pcb manufacturing companies, we are successfully passing the savings and bringing a total satisfaction of PCB/PCBA purchasing experience to our valued customers. That is why 100% of our regular customers come to us for their future orders.

In order to meet the requirements of halogen free pcb, the content of halogen contained in the PCB must not exceed a certain amount, which is measured in parts per million (ppm).

The use of halogen-free PCB

Halogens have a variety of uses in PCBs.

Chlorine can not only be used as a flame retardant or protective coating for PVC wire but also a solvent for semiconductor development and cleaning computer chips. Similarly, Bromine can be used as a flame retardant to protect electrical components or to sterilize components.

Halogen-free PCB design

It should be noted that it is difficult to find a real halogen-free PCBs. There may be small amounts of halogens on the board or some compounds hidden in unexpected places. Following are examples.

(1) The green circuit board will not be halogen-free unless the green substrate is removed from the solder mask because the epoxy resin that helps protect thecircuit board panelmay contain chlorine. The halogens may also be hidden in components such as glass adhesives, wetting agents and curing agents and resin accelerators.

(2) It should be paid attention to the potential pitifall of halogen free pcb material. For example, the ratio of solder to flux will be affected in the absence of halogen, resulting in scratches.

However, such problems are unnecessary to be solved. A simple way to avoid scratches is to use solder resist to define the pad.

It is also important to cooperate with a reputablePCB circuit manufacturerto ensure the transparency of the halogen content. Since not every manufacturer currently has the capability to produce these PCBs though they may have certifications. Nevertheless, the requirements to remove the halogen can be brought out since the place and use of the halogen are known. In one word, to work closely with the manufacturer is the best way to avoid unnecessary halogens.

Why the halogen-free PCB should be created?

Halogens do play a vital role in the structure of PCBs, but one disadvantage should not be ignored, the toxicity. Surely, they are functional flame retardants and biocides but they may cost a lot once something bad happen.

Chlorine and bromine are the main problems here. Exposure to either of the two chemicals may cause uncomfortable symptoms, such as nausea, coughing, skin irritation and blurred vision. However, even though correctly-treated halogen-containing PCBs is unlikely to be a dangerous exposure, the adverse side effects should be seen if a PCB catches fire and emits fumes.

If chlorine-containing components happen to mix with hydrocarbons, dioxins, a deadly carcinogen, thus can be produced. Unfortunately, some countries prefer to dispose of PCBs poorly because of the limited resources available to safely recover them. Therefore, the improper treating of PCB with high chlorine content is dangerous to the ecosystem. Burning them to eliminate (which does happen) may release dioxins into the air.

Advantages of Halogen-free PCBs

The main advantage is that they are less toxic alternatives to halogen-filled alternatives. The safety of your technicians and those who will handle the circuit board needs to be considered first.

In addition, the environmental risk is much lower compared to equipment containing a large amount of such hazardous chemicals. Especially in areas where the best PCB recycling practices are not available, a lower halogen content can ensure safer disposal.

In the booming technological era, consumers are becoming more aware of the toxins in their products, and their applications are almost limitless. Ideally, the automotive electronics, mobile s and other devices that we maintain close contact with should be halogen-free.

However, reduced toxicity is not the only advantage: they also have advantages on performance. These PCBs can withstand high temperatures and are therefore very suitable for lead-free circuits. Since lead is another compound that most industries try to avoid, you can kill two birds with one stone.

Halogen-free PCB insulation materials may be low-cost and effective for disposable electronic products. Moreover, because of the low dielectric constant delivered by these circuit boards, it is easier to maintain signal integrity.

All of us should strive to raise awareness to limit avoidable hazards in important equipment such as PCBs. Although the law has not yet stipulated halogen-free PCBs, it represents that relevant organizations are working to phase out the use of these harmful compounds.

If you have questions about our halogen-free PCB production capacity, or the specifications required for your custom project are not listed on this page, please feel free to contact us. We will reply within one workday. We will continue to provide quotation support and design support. Welcome to learn about our production process.

Other PCB Fab

Related Videos

Leave a Message

PCB Market

Related News

FAQs

How to Get a Quotation for PCBA (Assembly PCB)?

Please send BOM（Bill of Material/Components) and above mentioned PCB files. It’s better if you could supply finished production photos and full requirement detail images.

What will need for PCB clone service?

Please send us the printed circuit board concerned,and also the sharp photos of its front side and the back side.

Другие товары поставщика

	SINGLE SIDE PCB/SINGLE-SIDED PCB	ZF Electronics, as one of the top pcb fabrication companiesin China, can provide customers with single-sided PCB, double-sided FR4 PCB, metal core ...
	Thick Copper PCB	ZF Electronics, as one of the top pcb assembly supplierin China, can provide customers with single-sided PCB, double-sided FR4 PCB, metal core PCB,...
	Rogers PCB	ZF Electronics, as one of the top rogers pcb manufacturersin China, can provide customers with single-sided PCB, double-sided FR4 PCB, metal core P...
	Single Sided PCB	A single sided PCB, also known as one layer PCB, is a kind of printed circuit board produced by circuit board company. Only one side of a printed c...
	Metal Core PCB	ZF Electronics, as one of the top printed circuit board makerin China, can provide customers with single-sided PCB, double-sided FR4 PCB, metal cor...

Все товары поставщика

Похожие товары

	HO-70A hand crank slicer and shredder	Продавец: YONGKANG HAIOU ELECTRIC CO., LTD.	HO-70A hand crank slicer and shredder for slicing and shredding potatoes, radishes and other kind...
	Blue Abs Shell With Vertical Noodle Press	Продавец: YONGKANG HAIOU ELECTRIC CO., LTD.	1. Classic vertical noodle press 2. Blue ABS shell with foot box 3. Can be used to make noodles...
	Wood Pellets	Продавец: Jiangsu Kingwood Industrial Co., Ltd.	Wood pellets are a form of biomass fuel derived from compacted sawdust and other wo...
	Slab and pellet beeswax for cosmetic	Продавец: Syntop chemical Co.,Ltd.	Nowadays, beeswax has begun to be used as green food additives, coatings, packaging, additives in...
	Mini Shovel Rake Spade Garden Succulent Transplant Drilling Tool	Продавец: https://www.chinaaerator.net/	The Mini Shovel Rake Spade Garden Succulent Transplant Drilling Tool() is a versatile gardening t...