Cooling Tower Spray Nozzle
As an industrial cooling towers LLC, AUVC can provide different types of cooling tower parts. Using high-quality raw material which is the same as liangchi, marley, bac, kuken, kingsun.
The cooling tower nozzleis the component of water distribution in the cooling tower, which is made of ABS by one-time injection molding. Socket connection, firm connection, easy disassembly, not easy to block, nozzle water distribution is uniform, using cross water distribution method, hot water evenly distributed to the top of packing, can achieve full heat dissipation effect, can be widely used in circular and square counter flow tower.
As a professional cooling tower spray nozzle manufacturer, we offer different types of cooling tower water distribution nozzles. You can choose what you need from the following products.
Advantage of Cooling Tower Spray Nozzle
High strength, light weight, low water pressure, low spray height, uniform water distribution, good splash effect, convenient installation and maintenance, adjustable water volume, good heat dissipation effect, especially suitable for cooling water. Even water distribution, low working pressure (nozzle outlet working pressure is only 0.6mH2O), large pressure range, not easy to block. Because of its special designed locking and anti loosing device, it can be firmly connected with the water distribution pipe without falling off, which can ensure the long-term safe operation of the water distribution system. Under normal use conditions, the service life of the nozzle is 20 years.
Working Principle of Cooling Tower Nozzle
When the hot water flows through the cooling tower water spray nozzles, the swirling flow is generated under the action of the swirling plate in the nozzle, and the hot water is sprayed upward, and after the heat exchange with the air, the cold water falls into the pool, and the hot air is discharged into the atmosphere by the tower top duct after water removal by the water collector. It rotates in the cavity and rotates downward to eject from the lower nozzle. After the water is ejected, it forms an umbrella shaped rotating water body, impacts the splash strip and splash blade, and splashes into evenly distributed mist like small water droplets, falling to the top surface of the filler.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
200 Ton Cooling Tower | Square Cross Flow Cooling Tower (AH) The cross flow tower is the abbreviation of cross flow cooling tower. The cross flow tower refers to equipmen... |
 |
Cooling Tower Belt Reducer | Cooling tower belt reducer is a kind of deceleration equipment of cooling tower. The outer part of the main body is provided with a corresponding b... |
 |
Mechanical Draft Cooling Tower | A mechanical draft cooling towers, also known as a mechanical draft tower, is a cooling tower ventilated by wind, which is the main equipment of ci... |
 |
Cooling Tower Gearbox | The gear reducer is designed as a kind of reduction equipment of a cooling tower, which is generally used for transmission equipment with low speed... |
 |
Cooling Tower Float Ball | The cooling tower floatball, also called the cooling tower floating valve, is designed at the bottom of the pool. When the float ball is lower than... |
Похожие товары
 |
C500-1.7 Series High Flow Multi-Stage Centrifugal Blower /Centrifugal Blower | Продавец: Greentech International (Zhangqiu) Co., Ltd | Greentech International (Zhangqiu) Co., Ltdis the professional blower supplier.Multistage Centrif... |
 |
Common Rail injector control valve F00VC01303 | Продавец: China Lutong Part Plant | Common Rail injector control valve F00VC01303 Tina#Stainless Steel Cylindrical Pin##Denso Common... |
 |
Common Rail injector control valve F00VC01200 | Продавец: China Lutong Part Plant | Common Rail injector control valve F00VC01200 Tina#Stainless Steel Cylindrical Pin##Denso Common... |
 |
Injector Control Valve Plate 24# | Продавец: China Lutong Part Plant | Injector Control Valve Plate 24# Tina#Stainless Steel Cylindrical Pin##Denso Common Rail Injecto... |
 |
Injector Control Valve Plate 12# | Продавец: China Lutong Part Plant | Injector Control Valve Plate 12# Tina#Stainless Steel Cylindrical Pin##Denso Common Rail Injecto... |
