Cooling Tower Spray Nozzle
As an industrial cooling towers LLC, AUVC can provide different types of cooling tower parts. Using high-quality raw material which is the same as liangchi, marley, bac, kuken, kingsun.
The cooling tower nozzleis the component of water distribution in the cooling tower, which is made of ABS by one-time injection molding. Socket connection, firm connection, easy disassembly, not easy to block, nozzle water distribution is uniform, using cross water distribution method, hot water evenly distributed to the top of packing, can achieve full heat dissipation effect, can be widely used in circular and square counter flow tower.
As a professional cooling tower spray nozzle manufacturer, we offer different types of cooling tower water distribution nozzles. You can choose what you need from the following products.
Advantage of Cooling Tower Spray Nozzle
High strength, light weight, low water pressure, low spray height, uniform water distribution, good splash effect, convenient installation and maintenance, adjustable water volume, good heat dissipation effect, especially suitable for cooling water. Even water distribution, low working pressure (nozzle outlet working pressure is only 0.6mH2O), large pressure range, not easy to block. Because of its special designed locking and anti loosing device, it can be firmly connected with the water distribution pipe without falling off, which can ensure the long-term safe operation of the water distribution system. Under normal use conditions, the service life of the nozzle is 20 years.
Working Principle of Cooling Tower Nozzle
When the hot water flows through the cooling tower water spray nozzles, the swirling flow is generated under the action of the swirling plate in the nozzle, and the hot water is sprayed upward, and after the heat exchange with the air, the cold water falls into the pool, and the hot air is discharged into the atmosphere by the tower top duct after water removal by the water collector. It rotates in the cavity and rotates downward to eject from the lower nozzle. After the water is ejected, it forms an umbrella shaped rotating water body, impacts the splash strip and splash blade, and splashes into evenly distributed mist like small water droplets, falling to the top surface of the filler.
在线联系供应商
Other supplier products
 |
Cooling Tower Spray Nozzle | The nozzle of cooling tower is the component of water distribution in the cooling tower, which is made of ABS by one-time injection molding. Socket... |
 |
Cross Flow Cooling Tower | Cross flow cooling tower is an induced draft cooling tower that can cool water. Cross flow cooling tower working: The water flows vertically from t... |
 |
Open Circuit Cooling Tower | The open cooling tower has no air duct, the ventilation of the cooling tower depends on the natural wind force, and the cooling tower is equipped w... |
 |
Cooling Tower Gearbox | As an industrial cooling towers LLC, AUVC can provide different types of cooling tower parts. Using high-quality raw material which is the same as ... |
 |
Cooling Tower Float Ball | The cooling tower float ball, also called the float valve, is designed at the bottom of the pool. When the float ball is lower than the set value, ... |
Same products
 |
Nitrile Gloves Factory | 卖方: 苏州德士耐商贸有限公司 | Suzhou TEXNET Co., Ltd. provides nitrile glove solutions designed for medical, laboratory, health... |
 |
Preform Mould | 卖方: Taizhou Qihong Mold Co., Ltd. | Taizhou Qihong Mold Co., Ltd. specializes in developing and producing Preform Mould solutions for... |
 |
Nozzle Sprayer Nozzle Sprayer | 卖方: zhonglutong | Nozzle Sprayer Nozzle Sprayer Nozzle Sprayer Nozzle Sprayer Nozzle Sprayer DLLA133P814 Nozzle... |
 |
Nozzle Sprayer 0 433 175 568 Nozzle Sprayer | 卖方: zhonglutong | Nozzle Sprayer 0 433 175 568 Nozzle Sprayer Nozzle Sprayer Nozzle Sprayer Nozzle Sprayer 8N... |
 |
Nozzle Sprayer DLLA150P2574 Nozzle Sprayer 0 433 175 431 | 卖方: zhonglutong | Nozzle Sprayer DLLA150P2574 Nozzle Sprayer 0 433 175 431 Nozzle Sprayer 0 433 175 461 Nozzle Spra... |
