Backflow Preventers
ZECO Valve Group is established in 1991, as an experienced china valve manufacturer. We have 5 factories in China, which are located in Shanghai, Yancheng and Wenzhou, which mainly manufacture pressure reducing valve, pressure relief valve, balancing valve, PICV, water valveand industrial valves.
Festures of Backflow Preventers
lThe double check valve is designed as a whole, with small structure；
lBody is streamlined with little resistance loss；
lCombination of a double check valve and safety drain valve can completely prevent backflow pollution under any working condition；
lAll moving parts are made of non-rust and wear-resistant materials with long service life.
As one of the backflow preventer suppliers, ZECOoffers many high quality produxts, such as 2.5 inch backflow preventer, 4 double check backflow preventer, 6 rpz backflow preventerand so on. Backflow preventers for two check valve series, when one of the seal damage, the other also ACTS as a seal to prevent backflow. However, when the sealing of two check valves is broken at the same time, the check function is lost. Backflow preventers on the common type of foundation in the middle of the drain, so even if two check valve sealing at the same time damage, it can also play a role in preventing backflow pollution.
This double backflow valvemust be installed horizontally, the environment of the installation site should be clean, there should be sufficient maintenance space, the main degree of safety drain or (air barrier) outlet is more than 300mm above the ground, and 3 inch backflow valveshould not be flooded by water or debris, and the installation area should be equipped with drainage facilities. If you don’t know where to buy backflow preventer, please consult ZECO Valve Group.
Backflow Preventers Material and Standard
Size Range: 2"~12"Pressure Rating: 10bar ~ 25barFace to Face Dimensions: AMSE B16.10, EN558-1Flange End Dimension: AMSE B16.1/16.42, AS4087, EN1092-2Coating: Fusion Bonded Epoxy CoatingInspection and Test: ISO 5208 / EN 12226-2
|
Part |
Material |
Standard |
|
Body |
Ductile Iron |
EN 1563/DIN 1693 |
|
Bonnet |
Ductile Iron |
EN 1563/DIN 1693 |
|
Seat |
CuZn39Pb1 / C37000 |
EN12167/ASTM B135 |
|
Stem |
Stainless Steel 431 |
EN10088-1/ASTM A959 |
|
Spring |
Stainless Steel 431 |
EN10088-1/ASTM A959 |
|
Seal |
EPDM / NBR |
ISO 4633 |
|
For the materials options not listed, consult factory. ZECO manufactures valves in more than 50 different alloys. |
||
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
6 Inch Valve | 6 water valveis commonly used with flanged gate valves and various upper valves for water, including dirt separator.Features of ZECO collector:1. T... |
 |
Pressure Reducing Valve | It adjusts and controls the outlet pressure of the main valve to enable the outlet pressure of the main valve not vary with inlet pressure, enable ... |
 |
Top Entry Ball Valve | Description Due to the distinctive nature of the environmental conditions and operating conditions of the process, a typical ball valve is not suf... |
 |
Flapper Check Valve | Basic informationThis can be installed at the water outlet of the pump or the water outlet pipe to prevent backflow of the medium.Features1. Switch... |
 |
Forged Steel Gate Valve | Categories: Forged Steel Gate Valve, Gate Valve Tag: OS&Y Valve Description ZECO manufacturing capabilities for API 602 Forged Gate valves... |
