Backflow Preventers

ZECO Valve Group is established in 1991, as an experienced china valve manufacturer. We have 5 factories in China, which are located in Shanghai, Yancheng and Wenzhou, which mainly manufacture pressure reducing valve, pressure relief valve, balancing valve, PICV, water valveand industrial valves.

Festures of Backflow Preventers

lThe double check valve is designed as a whole, with small structure；

lBody is streamlined with little resistance loss；

lCombination of a double check valve and safety drain valve can completely prevent backflow pollution under any working condition；

lAll moving parts are made of non-rust and wear-resistant materials with long service life.

As one of the backflow preventer suppliers, ZECOoffers many high quality produxts, such as 2.5 inch backflow preventer, 4 double check backflow preventer, 6 rpz backflow preventerand so on. Backflow preventers for two check valve series, when one of the seal damage, the other also ACTS as a seal to prevent backflow. However, when the sealing of two check valves is broken at the same time, the check function is lost. Backflow preventers on the common type of foundation in the middle of the drain, so even if two check valve sealing at the same time damage, it can also play a role in preventing backflow pollution.

This double backflow valvemust be installed horizontally, the environment of the installation site should be clean, there should be sufficient maintenance space, the main degree of safety drain or (air barrier) outlet is more than 300mm above the ground, and 3 inch backflow valveshould not be flooded by water or debris, and the installation area should be equipped with drainage facilities. If you don’t know where to buy backflow preventer, please consult ZECO Valve Group.

Backflow Preventers Material and Standard

Size Range: 2"~12"Pressure Rating: 10bar ~ 25barFace to Face Dimensions: AMSE B16.10, EN558-1Flange End Dimension: AMSE B16.1/16.42, AS4087, EN1092-2Coating: Fusion Bonded Epoxy CoatingInspection and Test: ISO 5208 / EN 12226-2

Part	Material	Standard
Body	Ductile Iron	EN 1563/DIN 1693
Bonnet	Ductile Iron	EN 1563/DIN 1693
Seat	CuZn39Pb1 / C37000	EN12167/ASTM B135
Stem	Stainless Steel 431	EN10088-1/ASTM A959
Spring	Stainless Steel 431	EN10088-1/ASTM A959
Seal	EPDM / NBR	ISO 4633
For the materials options not listed, consult factory. ZECO manufactures valves in more than 50 different alloys.

Other supplier products

	Pressure Reducing Valve	Festures of pressure reducing valves for fire protection service Sensitive and accurate pressure control Adjustable static pressure and dynam...
	Gear Operated Ball Valve	Description of Gear Operated Valve: Large size ball valve if adopt manual operation will reduce the efficiency of personnel, even if many people h...
	Manual Ball Valve	As one of the china ball valve manufacturers, ZECO always adhere to exceed customer expectations,to provide customers with more international stand...
	Swing Check Valve	What is a Swing Check Valve? A Swing Check Valve is desinged to prevent the medium in the pipeline from flowing back. As pressure reaches zero, th...
	Combined Butterfly-Check Valve	ZECO Valve Group, founded in 1991 with focus on manufacturing china water valve, including control valves, balancing valves, gate valve, butterfly ...

供应产品

Same products

	FT wax used for EVA-based hot melt adhesive	卖方: Syntop chemical Co.,Ltd.	Fischer-Tropsch wax is a commonly used performance modifier in hot melt adhesives, especially for...
	high melting point FT wax improve the heat resistance of adhesives	卖方: Syntop chemical Co.,Ltd.	FischerTropsch wax is an alkane polymer produced from synthesis gas or natural gas via the Fische...
	For hot melt adhesive high melting point FT WAX	卖方: Syntop chemical Co.,Ltd.	The key advantage of high-melting-point Fischer-Tropsch wax in hot-melt adhesives stems from its ...
	Diesel Injection Delivery Valve 1W6982	卖方: China lutong	Diesel Injection Delivery Valve 1W6982 Diesel Injection Delivery Valve 19AChris Diesel Injection...
	High melting point FT wax used as plastic processing additives	卖方: Syntop chemical Co.,Ltd.	Due to its high purity, low oil content, narrow melting range, high hardness, and excellent therm...