8 INCH C-PLANE(0001) SAPPHIRE WAFERS
The 8-inch sapphire waferscan enable chip makers to roll out more productivity, which will help them drive down costs dramatically.
CRYSCORE is qualified to supply 8-inch epi-ready sapphire wafers. The common thickness is 1300 μm and 1500 μm.
Generally, this series of polished sapphire wafer has a notch instead of a major flat, but flat with custom length is also available. Our sapphire wafers are cleaned in class 100 cleanroom by ultrapure water with quality above 18MΩ *cm, and then packed in clean cassettes.
Specifications of 8 Inch C-plane(0001) Sapphire OpticsWafers
|
Item |
8-inch C-plane(0001) 1300μm Sapphire Wafers |
|
|
Crystal Materials |
99,999%, High Purity, Monocrystalline Al2O3 |
|
|
Grade |
Prime, Epi-Ready |
|
|
Surface Orientation |
C-plane(0001) |
|
|
C-plane off-angle toward M-axis 0.2 +/- 0.1° |
||
|
Diameter |
||
|
Thickness |
1300 μm +/- 25 μm |
|
|
Single Side Polished |
Front Surface |
Epi-polished, Ra < 0.2 nm (by AFM) |
|
(SSP) |
Back Surface |
Fine ground, Ra = 0.8 μm to 1.2 μm |
|
Double Side Polished |
Front Surface |
Epi-polished, Ra < 0.2 nm (by AFM) |
|
(DSP) |
Back Surface |
Epi-polished, Ra < 0.2 nm (by AFM) |
|
TTV |
< 30 μm |
|
|
BOW |
< 30 μm |
|
|
WARP |
< 30 μm |
|
|
Cleaning / Packaging |
Class 100 cleanroom cleaning and vacuum packaging, |
|
|
25 pieces in one cassette packaging or single piece packaging. |
||
Note: Custom sapphire wafers with any orientation and any thickness can be provided.
If you want to know more about sapphire wafer cost, sapphire wafer price, please contact us.
More types of sapphire rod, please visit our website.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
| GaN on Sapphire | As a professional sapphire wafermanufacturer, CRYSCORE can provide standard or optical sapphirewafers with any orientation applied to epitaxy, as w... | |
| SAPPHIRE INGOTS/RODS | Sapphire ingots are typically used as raw materials for further processing. These sapphire rodsand sapphire ingots are uniformly shaped, usually as... | |
| SAPPHIRE INGOTS/RODS | Sapphire ingotsare typically used as raw materials for further processing. These sapphire rods and sapphire ingots are uniformly shaped, usually as... | |
| STANDARD SAPPHIRE WAFERS (C-PLANE) | STANDARD SAPPHIRE WAFERS (C-PLANE) CRYSCORE can offer Epi-Ready grade optical sapphire wafer with a very low surface roughness in complete orientat... | |
| A-PLANE (11-20) SAPPHIRE WAFERS | A plane sapphirewafers have a uniform dielectric constant and highly insulating characteristic, so they are generally used for hybrid microelectron... |
Похожие товары
| C500-1.7 Series High Flow Multi-Stage Centrifugal Blower /Centrifugal Blower | Продавец: Greentech International (Zhangqiu) Co., Ltd | Greentech International (Zhangqiu) Co., Ltdis the professional blower supplier.Multistage Centrif... | |
| Common Rail injector control valve F00VC01303 | Продавец: China Lutong Part Plant | Common Rail injector control valve F00VC01303 Tina#Stainless Steel Cylindrical Pin##Denso Common... | |
| Common Rail injector control valve F00VC01200 | Продавец: China Lutong Part Plant | Common Rail injector control valve F00VC01200 Tina#Stainless Steel Cylindrical Pin##Denso Common... | |
| Injector Control Valve Plate 24# | Продавец: China Lutong Part Plant | Injector Control Valve Plate 24# Tina#Stainless Steel Cylindrical Pin##Denso Common Rail Injecto... | |
| Injector Control Valve Plate 12# | Продавец: China Lutong Part Plant | Injector Control Valve Plate 12# Tina#Stainless Steel Cylindrical Pin##Denso Common Rail Injecto... |















