HVAC PRESSURE SWITCH

• 

A digital thermostat is not the ideal solution for some refrigeration systems. When the compressor is started, refrigerant vapor transform into high-temperature high-pressure fluid and enter the condenser where most of the heat is rejected, the refrigerant flow leaves the condenser and arrive the evaporator there undergo a sharp temperature and pressure drop, the cold air will enter the refrigeration chamber, the refrigerant flow will be heated by the rejected heat and return to vapor. The low-pressure setting can be used to control the temperature because the pressure proportional related to the temperature in the refrigeration system. Hence, a simple mechanism will help in this area.

THERE ARE SOME ADVANTAGES TO LEFOO MECHANICAL PRESSURE SWITCHES. ELECTRICITY-FREE, WIRING IS SIMPLIFIED AND COST LESS WHEN INSTALLED.

Wrong install pressure switch relief valve between the bottom manifold and pressure switch itself will cause back pressure and pressure leakage. There is a diaphragm(0.15mm tin bronze disc)and a Nitrile rubber O-ring to seal the spring trigger. Be careful with the diaphragm when using a pressure switch on a fluid pipeline or liquid tank, because it's hard to mend pressure exactness after the liquid leak into the pressure switch. Inside the spring is a threaded galvanized iron stud that will trigger a nylon PA66 covered electric bridge (durability of 100 thousand times).

Cut in and cut out pressures will mechanical control the work time when a pressure switch is installed. Usually, it is advantageous to keep the refrigerating system work a long period and rest a long interval for energy efficiency.

TO SET CUT IN AND CUT OUT PRESSURES NEED TO KNOW

The lowest temperatures of refrigeration chamber or chilling room.

The temperature difference between the chamber temperature and the refrigerant temperature in the evaporator.

Start time and temperature boost range of the compressor.

The pressure differences at the evaporator output and the compressor input.

LEFOO provide pressure differential monitor, peristaltic pump, booster pump for water purifier, low pressure switch hvac, etc. Contact us to know more.

Другие товары поставщика

	Lefoo 115VAC RO Diaphragm Booster Pump	Low vibration and low noise, self-priming and stable pressure feeding, LEFOO 115VAC RO Diaphragm booster pump are ideal for indoor RO system applic...
	LEFOO PRESSURE SWITCH HVAC	A pressure switch controlis a control device that runs a switch on or switch-off action when a preset pressure value occurs. LEFOO pressure control...
	LEFOO BRUSHLESS RO BOOSTER PUMP	This brushless RO booster pump series is powered by a permanent magnet brushless motor, 0.5/0.7 Mpa pressure feeding,42~45db noise level, adjustabl...
	LEFOO HIGH ACCURACY PRESSURE TRANSMITTER	High Accuracy Pressure Transmitter LFT2010 High accuracy pressure transmitter applies a silicon strain diaphragm embedded in an oil-filled steel h...
	RO Booster Pump 75 gpd	RO booster pump also referred to as the reverse osmosis booster pump, RO Booster Pump 75-gpd is a device to increase water pressure coming into the...

Похожие товары

	C500-1.7 Series High Flow Multi-Stage Centrifugal Blower /Centrifugal Blower	Продавец: Greentech International (Zhangqiu) Co., Ltd	Greentech International (Zhangqiu) Co., Ltdis the professional blower supplier.Multistage Centrif...
	Common Rail injector control valve F00VC01303	Продавец: China Lutong Part Plant	Common Rail injector control valve F00VC01303 Tina#Stainless Steel Cylindrical Pin##Denso Common...
	Common Rail injector control valve F00VC01200	Продавец: China Lutong Part Plant	Common Rail injector control valve F00VC01200 Tina#Stainless Steel Cylindrical Pin##Denso Common...
	Injector Control Valve Plate 24#	Продавец: China Lutong Part Plant	Injector Control Valve Plate 24# Tina#Stainless Steel Cylindrical Pin##Denso Common Rail Injecto...
	Injector Control Valve Plate 12#	Продавец: China Lutong Part Plant	Injector Control Valve Plate 12# Tina#Stainless Steel Cylindrical Pin##Denso Common Rail Injecto...