HVAC PRESSURE SWITCH
A digital thermostat is not the ideal solution for some refrigeration systems. When the compressor is started, refrigerant vapor transform into high-temperature high-pressure fluid and enter the condenser where most of the heat is rejected, the refrigerant flow leaves the condenser and arrive the evaporator there undergo a sharp temperature and pressure drop, the cold air will enter the refrigeration chamber, the refrigerant flow will be heated by the rejected heat and return to vapor. The low-pressure setting can be used to control the temperature because the pressure proportional related to the temperature in the refrigeration system. Hence, a simple mechanism will help in this area.
THERE ARE SOME ADVANTAGES TO LEFOO MECHANICAL PRESSURE SWITCHES. ELECTRICITY-FREE, WIRING IS SIMPLIFIED AND COST LESS WHEN INSTALLED.
Wrong install pressure switch relief valve between the bottom manifold and pressure switch itself will cause back pressure and pressure leakage. There is a diaphragm(0.15mm tin bronze disc)and a Nitrile rubber O-ring to seal the spring trigger. Be careful with the diaphragm when using a pressure switch on a fluid pipeline or liquid tank, because it's hard to mend pressure exactness after the liquid leak into the pressure switch. Inside the spring is a threaded galvanized iron stud that will trigger a nylon PA66 covered electric bridge (durability of 100 thousand times).
Cut in and cut out pressures will mechanical control the work time when a pressure switch is installed. Usually, it is advantageous to keep the refrigerating system work a long period and rest a long interval for energy efficiency.
TO SET CUT IN AND CUT OUT PRESSURES NEED TO KNOW
The lowest temperatures of refrigeration chamber or chilling room.
The temperature difference between the chamber temperature and the refrigerant temperature in the evaporator.
Start time and temperature boost range of the compressor.
The pressure differences at the evaporator output and the compressor input.
LEFOO provide pressure differential monitor, peristaltic pump, booster pump for water purifier, low pressure switch hvac, etc. Contact us to know more.
Send product request
Other supplier products
 |
LEFOO DIFFERENTIAL PRESSURE TRANSMITTER | A differential pressure transmitter is a device for monitoring pressure changes at two positions Differential Pressure Transmitter LFT2050 A di... |
 |
PRESSURE TRANSMITTER | PRESSURE TRANSMITTER A Pressure Transmitter is a device that produces an output electrical signal (ma or microvolt) that varies with the pressure ... |
 |
FLAT FILM PRESSURE SENSOR | Diaphragm Differential Pressure Transmitter Pressure Type: Guage/ Absolute Diffusion silicon core + 316L thin diaphragm Pressure Accuracy： 0.25%... |
 |
Lefoo Differential Pressure Gauge LFB | Consists of magnetic spiral movement and a rubber diaphragm as the sensitive element to measure the pressure. LEFOO pressure differentialgauge LFB-... |
 |
LEFOO 300 GPD RO PUMP | 300 GPD Pump/ Pressure Booster Pump / Self-Priming Pump Work Flow: 2.6L/min or 2.7L/min Work Pressure: 0.5Mpa=70Psi Noise Level: ≦53db / ≦55db ... |
Same products
 |
Fischer Tropsch wax white granules used in candle | Seller: Syntop chemical Co.,Ltd. | Fischer-Tropsch wax is used in various formulations of hot-melt adhesives: Low-temperature/high-... |
 |
Mining Machinery Parts | Seller: XINGTAI ME MINING EQUIPMENT CO.,LTD. | Mining Machinery Parts HEAVY-DUTY MINING EQUIPMENT PARTS SUPPLIER Mining Equipment Parts ... |
 |
PH-08 Waterproof Soil PH Meter | Seller: Kelilong Electron Co.,Ltd | Model PH-08 Range PH 0.00～14.00PH Temp 0～50℃ Resolution PH 0.01PH Temp 0.1℃ Accuracy PH ±... |
 |
candle raw material White Wax with low melting point | Seller: Syntop chemical Co.,Ltd. | Lubricant wax: Fischer-Tropsch wax is widely used in the lubricants sector. It offers excellent l... |
 |
Fischer Tropsch wax used for road marking paint | Seller: Syntop chemical Co.,Ltd. | Fischer-Tropsch wax is widely used in road marking paints and serves as a key performance additiv... |
