.

Metal Seated Gate Valve

Features of Metal Seated Gate Valve

The stem is permanently sealed by three independent seals, and if the seal wears out after long use, the gland bolts only need to be tightened;

Stem spherical stop-thrust, low friction resistance, so that the valve is light to open and close, low operating torque;

Major stem O-ring can be replaced with pressure in the pipe;

Epoxy resin sprayed on the inner and outer surface of the product, not easy to corrode.

Metal Seated Gate Valve Working Principle

Metal Seated gate valve vs resilient seatedgate valve, Usually both can be used on the water pipeline, reilient seated gate china valvemore for clean water pipeline, because the granular medium will cause damage to the rubber of the gate, while the metal seated gate valve is more widely used, the hardness of the bronze seat makes in the granular medium can also be very good to achieve the sealing effect and service life will not be greatly affected. But the metal seated gate valve production cycle is longer, the use of higher costs, so the choice between the two or according to the working conditions of the media conditions and budget to choose.

Metal Seated Gate Valve Installation and Commissioning

Metal seated gate control valvein the pipeline does not require frequent maintenance, depending on the time of use, the stem O-ring can be replaced periodically to reduce the possibility of leakage. For specific use, please consult Zeco Valve Group.

Metal Seated Gate Valve Material and Standard

Size Range: 2"~64"

Pressure Rating: 10bar ~ 25bar

Face to Face Dimensions: AMSE B16.10, EN558-1

Flange End Dimension: AMSE B16.5, AS4087, EN1092-2

Coating: WRAS approved Fusion Bonded Epoxy Coating

Inspection and Test: ISO 5208 / EN 12226-2

Part

Material

Standard

Body

Ductile Iron/ Cast Iron

EN 1563/DIN 1693

Bonnet

Ductile Iron/ Cast Iron

EN 1563/DIN 1693

Trim

Ductile Iron/ Cast Iron

EN 1563/DIN 1693

Seat

Bronze/Brass

ASTM B62/ ASTM B148

O-ring

EPDM / NBR

ISO 4633

For materials options not listed, consult factory.

Zeco manufactures valves in more than 50 different alloys.


Отправить запрос, связаться с поставщиком

Кому: ZhengFeng Valve Group
Ваш E-mail:
Текст письма:


Send to other suppliers

Другие товары поставщика

Flanged Concentric Butterfly Valve
Flanged Concentric Butterfly Valve Basic informationThis Flanged is used in various service and drain lines as truncation and regulating equipment.Features1. Bidirectional sealing, n...
Pump Control Valve
Pump Control Valve This valve is installed at the outlet of the water pump. It can prevent the backflow of the medium, linked with the water pump, and can effectively...
Backflow Preventers
Backflow Preventers Basic informationThis big dirt separatorvalve is used for water purification.Features1. Easy to operate;2. No water stop is required to clean the c...
Modulating Float Valve
Modulating Float Valve Features of modulating float control valve Stable and reliable work, large flow; Disc fast open and slow closed, no water hammer impact; Goo...
Resilient Gate Valve for Underground
Resilient Gate Valve for Underground Basic informationThis underground gate valveis used as a two-way closed circuit device.Features1. No need for sluice Wells, which reduces the amoun...
Все товары поставщика

Похожие товары

FT wax used for EVA-based hot melt adhesive
FT wax used for EVA-based hot melt adhesive Продавец: Syntop chemical Co.,Ltd. Fischer-Tropsch wax is a commonly used performance modifier in hot melt adhesives, especially for...
high melting point FT wax improve the heat resistance of adhesives
high melting point FT wax improve the heat resistance of adhesives Продавец: Syntop chemical Co.,Ltd. FischerTropsch wax is an alkane polymer produced from synthesis gas or natural gas via the Fische...
For hot melt adhesive high melting point FT WAX
For hot melt adhesive high melting point FT WAX Продавец: Syntop chemical Co.,Ltd. The key advantage of high-melting-point Fischer-Tropsch wax in hot-melt adhesives stems from its ...
Diesel Injection Delivery Valve 1W6982
Diesel Injection Delivery Valve 1W6982 Продавец: China lutong Diesel Injection Delivery Valve 1W6982 Diesel Injection Delivery Valve 19AChris Diesel Injection...
High melting point FT wax used as plastic processing additives
High melting point FT wax used as plastic processing additives Продавец: Syntop chemical Co.,Ltd. Due to its high purity, low oil content, narrow melting range, high hardness, and excellent therm...