Modulating Float Valve
Features of modulating float control valve
Stable and reliable work, large flow;
Disc fast open and slow closed, no water hammer impact;
Good sealing effect and long service life;
Install at any location along with the height of the water tank and the working space.
Modulating Float Valve Working Principle
When the pipe supplies water from the inlet end, because the needle valve, ball valve, and float ball control valveare normally open, water enters the water tank through the micro-filter, needle valve, control room, ball valve, and float ball valve. At this time, there is no pressure in the control room; When the water level of the water tower rises to the set height, the ball float closes the ball float valve, controls the indoor water pressure rise, pushes the main valve to close, and the water supply to stop. When the water level drops, the float valve reopens, the water pressure in the control room drops, and the main valve opens again to continue the water supply, keeping the setting height of the liquid level.
Modulating Float Valve Installation and Commissioning
Horizontal installation is preferred for remote-controlled ball float valve. The main valve and ball float pilot valve can be remotely installed as a whole. This valve is installed in the water system and debugged. The globe valve is opened. The main valve needle valve is opened for 2 to 4 rounds. The ball valve is fully opened. For specific use, please consult ZecoValve Group.
Modulating Float Valve Material and Standard
Size Range: 2"~24"
Pressure Rating: 10bar ~ 25bar
Face to Face Dimensions: AMSE B16.10, EN558-1
Flange End Dimension :AMSE B16.1/16.42, AS4087, EN1092-2
Coating: Fusion Bonded Epoxy Coating
Inspection and Test: ISO 5208 / EN 12226-2
|
Part |
Material |
Standard |
|
Body |
Ductile Iron |
EN 1563/DIN 1693 |
|
Bonnet |
Ductile Iron |
EN 1563/DIN 1693 |
|
Trim |
Stainless Steel 304 |
EN10088-1/ASTM A959 |
|
Seat |
Stainless Steel 304 |
EN10088-1/ASTM A959 |
|
Diaphragm |
EPDM / NBR |
ISO 4633 |
|
Pilot Valve |
Stainless Steel 304 |
EN10088-1/ASTM A959 |
|
For materials options not listed, consult factory. Zeco manufactures valves in more than 50 different alloys. |
||
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
4 Inch Ball Valve | Description of 4 Inch Ball Valve: ZECO4 inch flanged ball valveis also the most common batch products, which are mainly floating ball valves. Occa... |
 |
4 Inch Ball Valve | Description of 4 Inch Ball Valve: ZECO4 inch ball valveis also the most common batch products, which are mainly floating ball valves. Occasionally,... |
 |
3 Inch Gate Valve | Description of 3 Inch Gate Valve: ZECO 3 inch gate valve is mainly used for fully open or fully closed switching valves. They are usually not used ... |
 |
4 Inch Butterfly Valve | Description of 4 Inch Butterfly Valve: ZECO 4 flanged butterfly valveis made of body, disc, stem, seat, stuffing box, gear etc. ZECO butterfly valv... |
 |
Resilient Gate Valve for Underground 1025 | 6 inch water valveis commonly used with flanged gate valves and various upper valves for water, including dirt separator.Features of ZECO collector... |
