24KV Recloser Vacuum Circuit Breaker
The 24KV breaker switch unit is comprised of three poles, the operating mechanism, and the operating mechanism housing. The sequence of the poles is A -B – C or 1 – 2 - 3 (sequence left to right when viewed from the lower terminal side of the recloser switch unit.
Each 24kv vacuum circuit breakerby GOPOWERis embedded in a solid-insulated pole made of weather-proof cyclo aliphatic epoxy resin. This enables a small design as well as resistance against environmental effects.
Breaker principle and design of 24KV Vacuum Circuit Breaker
ZW32 series 24KV circuit recloser are used in distribution systems. 24kv vacuum circuit breakes are used to make and break normal and fault currents. Breakers are fully equipped with sensors and a controller to provide a means of protection and control.
In case of a line fault, breakers can break and make currents several times, thus avoiding longer network interruptions due to temporary faults. The manufacture, design, and testing of the vacuum recloser is based on current standards IEC 62271-111：2019
Technical Parameters of 24KV Vacuum Circuit Breaker
|
Products Type |
ZW32-24 |
|
Maximum System Voltage |
24kV |
|
Rated Continuous Current |
630A |
|
Rated Frequency |
50/60Hz |
|
Short Time Withstand Current |
20kA/1sec |
|
Mainly Active Load Current |
630A |
|
Number of Load-break Operations |
30 |
|
Short-circuit Making Current (peak) |
50kA |
|
Number of Making Operations |
5 times |
|
Cable Charging Current |
25A |
|
Line Charging Current |
|
|
Closed Loop Circuit Current |
630A |
|
Transformer Magnetizing Current |
22A |
|
Wet Condition-10sec Ph- Ph-Eth, Across Interrupters |
50kV |
|
DryCondition-1min，Ph- Ph, Phase to Earth |
65kV |
|
Dry Condition - 1 min AcrossInterrupter |
79kV |
|
Phase to Phase, Phase to Earth |
125kV |
|
Across Interrupter |
145kV |
|
Internal Arc Test |
20kA /0.1 sec |
|
Arc Extinction Medium |
vacuum |
|
Insulation Medium |
vacuum |
|
Creepage Distance (Silicon) |
960mm |
|
Dry arcing distance |
200mm≥ |
|
IP Level |
67 |
|
Closing/Opening Time |
＜1sec |
|
Mechanical Operations (Guaranteed) |
10000times |
|
Operating Temperature (*Manual Type) |
-25～+70℃ |
Gopower is a professional electric power equipment company, we provide auto recloser, load break switchand etc. For more info, please feel free to contact us!
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
SF6 Gas 11 KV Load Break Switch | SF6 Gas 11 KV Load Break Switch The 11kv load break switchis suitable for the distribution network with the highest voltage 11kV, the rated curren... |
 |
SF6 Gas 11KV Load Break Switch | SF6 Gas 11KV Load Break Switch The 11kv load break switchis suitable for the distribution network with the highest voltage 11kV, the rated current... |
 |
LBS 24KV 630a SF6 Gas Load Break Switch | LBS 24KV 630a SF6 Gas Load Break Switch 24kV SF6 load break switch is a sf6 load break switch for medium voltage switchgear, using SF6 gas as ar... |
 |
Control Box-Feeder Terminal Unit | The feeder terminal unit(FTU) is a new HV switch control device of control cabinet enclosures equipped with both the imported DSP high-speed sampli... |
 |
33KV SF6 Gas Load Break Switch | These load break switch 33kv are intended for outdoor applications. They can be mounted either horizontally or vertically, and are suitable for ele... |
Похожие товары
 |
Marlboro red for sale / Wholesale Marlboro cigarettes | Продавец: 871344 | Whatsapp : +40 767 772 668Signal : Townrunner.01 Marlboro red for sale Wholesale Marlboro ciga... |
 |
MEGA M-PR 3.1 ბლოკის და ბეტონის ქვაფენილის საწარმოო დანადგარის კომპლექტი | Продавец: VBM GLOBAL | |
 |
Micronized wax used for significantly improving wear resistance | Продавец: Syntop chemical Co.,Ltd. | Micro-powdered wax is a micron-sized wax powder additive primarily used to improve surface proper... |
 |
450ml Nanzhu Bamboo Coffee Handle Mug | Продавец: 865087 | The 450ml Nanzhu Bamboo Coffee Handle Mug from Yongkang Aijun Industry & Trade Co., Ltd. comb... |
 |
Custom Two Shot Mold | Продавец: WIT MOLD LIMITED | Custom Two Shot Mold 2K injection molding, also known as two-shot injection molding, is a re... |
