CA Series-770CA30 PEEK Carbon Fiber Reinforcement
CA Series-770CA30 carbon fiber filled peekreinforcement is widely used in automobile and aviation fields. It is widely used in automobile fuel pump and gearbox. It can help equipment reduce weight, reduce noise and increase the service life of wear-resistant parts, reduce or even avoid the use of lubricants.
Specification of CA Series-770CA30 PEEK Carbon Fiber Reinforcement
Material Properties |
Test Method |
Conditions |
Units |
770G |
Mechanical Data |
||||
Tensile Strength |
ISO 527 |
B reak,23℃ |
MPa |
- |
Y ield,23℃ |
MPa |
100 |
||
Tensile Elogation |
ISO 527 |
Break,23℃ |
% |
45 |
Flexural Strength |
ISO 178 |
Break,23℃ |
MPa |
- |
Y ield,23℃ |
MPa |
165 |
||
Fleoural Modulus |
ISO 178 |
23℃ |
Gpa |
|
Compressive Strength |
ISO 604 |
23℃ |
MPa |
125 |
Charpy Impact Strength |
ISO 179/leA |
Notched |
kJm-2 |
7 |
ISO 179/IU |
Unnotched |
kJm-2 |
- |
|
Izod Impact Strength |
ISO 180/A |
Notched |
kJm-2 |
|
ISO 180/U |
Unnotched |
kJm-2 |
- |
|
Mould Shrinkage |
ISO 294-4 |
Along flow |
% |
1 |
Across flow |
% |
|||
Thermal Data |
||||
Melting Point |
ISO 11357 |
℃ |
343 |
|
Glass Tansition (Tg) |
ISO 11357 |
Onset |
℃ |
143 |
Special Heat Capacity |
DSC |
23℃ |
kj kg-1℃-1 |
|
Coefficient of Thermal Expansion |
ISO 11359 |
Along flow below Tg |
ppm K-1 |
45 |
Along flow above Tg |
ppm K-1 |
120 |
||
Heat Deflecion Temperature |
ISO 75A-f |
℃ |
152 |
|
Thermal Conductivity |
ASTM C177 |
23℃ |
W m-1K-1 |
|
Flow |
||||
MeltIndex |
ISO 1133 |
380℃,5kg |
g10min-1 |
10 |
Miscellaneous |
||||
Density |
ISO 1186 |
Crystalline |
gcm-3 |
|
Amorphous |
gcm-3 |
|||
Shore D Hardness |
ISO 868 |
23℃ |
85 |
|
Water Absorption(3.2mm thick Tensile Bar) |
ISO 62-1 |
24h,23℃ |
% |
|
by immersion |
Equilib riu m,23℃ |
% |
||
Electrical Data |
||||
Dielectric Strength |
IEC 60243-1 |
2mm |
kV mm-1 |
23 |
Comparative Tracking Index |
IEC 60112 |
V |
150 |
|
Dielectric Constant |
IEC 60250 |
23℃,1kHz |
||
23℃,50kHz |
3 |
|||
Loss Tangent |
IEC 60250 |
23℃,1MHz |
||
Volume Resistivity |
IEC 60093 |
23℃,1V |
Ω cm |
10 16 |
275℃ |
Ω cm |
10 9 |
As a professional PEEK material supplier, ZYPEEK provides quality plastic PEEK materials wholesale with excellent properties. Our PEEK raw material line includes Grade G PEEK pure resin pellets, Grade PF PEEK pure resin fine powder, Grade R&D PEEK, etc. Contact ZYPEEK, your reliable PEEK material manufacturer, now!
Отправить запрос, связаться с поставщиком
Другие товары поставщика
PEEK Valve in Home Appliances | PEEK Valvein Home Appliances PEEK has good wear resistance, self-lubrication, non-toxicity, high-temperature resistance, low density, and can de... | |
PEEK in Electronic & Electrical | PEEK is a C-level insulating material, keeps excellent insulating properties under high temperature, high pressure, high humidity and other environ... | |
Antistatic Material PEEK R&D Series | AntistaticPEEKR & D Series has excellent electrical insulation, high temperature resistance and wear resistance. Anti-static peek color is blac... | |
Grade GL Glass Filled Fiber Reinforced PEEK | PEEK-GL series, is a glass fiber composite modified peek plastic materials, currently available from 5% -35% of different mass fractions of reinfor... | |
Grade GL Glass Filled Fiber Reinforced PEEK | PEEK-GL series, is a glass fiber composite modified PEEK glassmaterials, currently available from 5% -35% of different mass fractions of reinforced... |
Похожие товары
MONSA® DDAC-50 | Продавец: Guangzhou Monsa Chemical Co., Ltd | INCI name: MONSA® DDAC-50 It functions by causing the cell membrane of bacteria to rupture... | |
MONSA® DCA-50 | Продавец: Guangzhou Monsa Chemical Co., Ltd | INCI name: disodium cocoampho diacetate Disodium cocoamphodiacetate for skinis a very mild amp... | |
MONSA® CTAC-50 | Продавец: Guangzhou Monsa Chemical Co., Ltd | INCI name: Cetyl Trimethyl Ammonium Chloride Cetyl Trimethyl Ammonium Chloride is an ammonium ... | |
MONSA® CTAC-30 | Продавец: Guangzhou Monsa Chemical Co., Ltd | INCI name: Cetyl Trimethyl Ammonium Chloride 30% Cetyltrimethyl ammonium chloride30% is mainly... | |
Инжектор Common Rail | Продавец: 德艾普( xiamen) импорт и экспорт Co., Ltd. | Артикул: Инжектор дизельного топлива Модель №: MOQ: 1 шт. Материал: Стал... |