Tooth torsion yield tester

• 

Applicable standards:

YY/T 0315-2016: This standard may specifically address certain performance requirements for titanium and titanium alloy dental implants, including test requirements for torsional yield strength.

ISO TS 13498-2011: This standard deals with torsion testing of joint component implants/joint joint joints for dental intraosseous implant systems, which may include testing requirements for the torsional yield strength of dental implants.

Main parameters:

Torque measurement range: This parameter determines the maximum torque value that the tester can measure. Common torque measurements may range from a few Newton ·m （N·m） to a dozen Newton ·m, depending on the tester model and manufacturer.

Torque measurement accuracy: This parameter indicates the accuracy of the tester when measuring torque. High precision is the key to ensure the reliability of test results. Common torque measurement accuracy may reach ±1% or higher, the actual accuracy may be higher, such as ±0.5% or more.

Torsion Angle measurement range: This parameter determines the maximum torsion Angle that the tester can measure. Common torsion Angle measurements can range from 0° to hundreds of thousands of °, depending on the tester model and manufacturer. Some testers may also offer the option of infinite torsion angles.

Resolution: This parameter indicates the minimum resolvable value of the tester when measuring torque and torsion Angle. The high resolution allows for a more precise understanding of how the material's properties change during torsion. Common resolutions can reach extremely small values, such as 0.000002Nm （torque） and extremely small angular values （torsion Angle）。

Test speed: This parameter determines the rotation speed of the tester during the test. Common test speeds can range from a few degrees per minute to thousands of degrees per minute, depending on the tester model and manufacturer. The choice of test speed should be determined according to the specific test requirements and material characteristics.

Fixture: The fixture is one of the key components of the tester and is used to fix and clamp the sample. High-quality fixtures should have good durability and stability to ensure accuracy and reliability during testing. Common fixture materials may include high-strength materials such as stainless steel.

Control system: This parameter determines the degree of automation and test efficiency of the tester. Modern testers usually use advanced control systems, such as PLC （programmable logic controller） or microcomputer control, to achieve automatic control and data acquisition. These control systems help improve the accuracy and efficiency of the test.

Display and recording: The tester is usually equipped with a color touch screen display and recording system, supporting functions such as Chinese and English menu operation and data export. These features make it easy for users to set test parameters, view test results, and export test reports.

Другие товары поставщика

	Activated carbon wear resistance tester	Applicable standards: GB/T 30202.3-2013: This is the wear resistance test standard in the test method of coal-based granular activated carbon for ...
	Leather friction color fastness tester	TRANSLATE with x English Arabic Hebrew Polish Bulgarian Hindi Portuguese Catalan Hmong Daw Romanian ...
	Syringe needle flow tester	Product introduction 　　It is a device used to detect the flow of syringes. The principle is to calculate the flow of syringes by measuring the ...
	wet penetration textile test instrument	TRANSLATE with x English Arabic Hebrew Polish Bulgarian Hindi Portuguese Catalan Hmong Daw Romanian ...
	Bag lifting fatigue testing machine	Product Introduction: This machine is suitable for up and down vibration fatigue test of plastic handbag, garbage vest bag, kraft paper bag, woven...

Похожие товары

	Washable Cheap 13.56Mhz 213 Nfc Mini Stickers 13.56 Mhz RFID Label Sticker Tag HF/UHF Tags Dry Inlay	Продавец: XIUCHENG RFID	Size：On request Material:PET, PVC,paper or customized Frequency:UHF/HF Printing:Thermal transf...
	Micronized wax used for industrial paint processing	Продавец: Syntop chemical Co.,Ltd.	Micronized wax is a vital functional additive in industrial paint processing, with primary functi...
	Plant Growth Regulator Manufacturer	Продавец: HEBEI LAIKE BIOTECH CO.LTD	Plant Growth Regulator Manufacturer Plant Growth Regulator Manufacturer - Laike Biotech spec...
	Fungicide Supplier	Продавец: HEBEI LAIKE BIOTECH CO.LTD	Fungicide Supplier Wholesale Fungicide - Laike Biotech is a professional supplier and manufa...
	Fungicide Supplier	Продавец: HEBEI LAIKE BIOTECH CO.LTD	Fungicide Supplier Wholesale Fungicide - Laike Biotech is a professional supplier and manufa...