Tooth torsion yield tester
Applicable standards:
YY/T 0315-2016: This standard may specifically address certain performance requirements for titanium and titanium alloy dental implants, including test requirements for torsional yield strength.
ISO TS 13498-2011: This standard deals with torsion testing of joint component implants/joint joint joints for dental intraosseous implant systems, which may include testing requirements for the torsional yield strength of dental implants.
Main parameters:
Torque measurement range: This parameter determines the maximum torque value that the tester can measure. Common torque measurements may range from a few Newton ·m （N·m） to a dozen Newton ·m, depending on the tester model and manufacturer.
Torque measurement accuracy: This parameter indicates the accuracy of the tester when measuring torque. High precision is the key to ensure the reliability of test results. Common torque measurement accuracy may reach ±1% or higher, the actual accuracy may be higher, such as ±0.5% or more.
Torsion Angle measurement range: This parameter determines the maximum torsion Angle that the tester can measure. Common torsion Angle measurements can range from 0° to hundreds of thousands of °, depending on the tester model and manufacturer. Some testers may also offer the option of infinite torsion angles.
Resolution: This parameter indicates the minimum resolvable value of the tester when measuring torque and torsion Angle. The high resolution allows for a more precise understanding of how the material's properties change during torsion. Common resolutions can reach extremely small values, such as 0.000002Nm （torque） and extremely small angular values （torsion Angle）。
Test speed: This parameter determines the rotation speed of the tester during the test. Common test speeds can range from a few degrees per minute to thousands of degrees per minute, depending on the tester model and manufacturer. The choice of test speed should be determined according to the specific test requirements and material characteristics.
Fixture: The fixture is one of the key components of the tester and is used to fix and clamp the sample. High-quality fixtures should have good durability and stability to ensure accuracy and reliability during testing. Common fixture materials may include high-strength materials such as stainless steel.
Control system: This parameter determines the degree of automation and test efficiency of the tester. Modern testers usually use advanced control systems, such as PLC （programmable logic controller） or microcomputer control, to achieve automatic control and data acquisition. These control systems help improve the accuracy and efficiency of the test.
Display and recording: The tester is usually equipped with a color touch screen display and recording system, supporting functions such as Chinese and English menu operation and data export. These features make it easy for users to set test parameters, view test results, and export test reports.
Send product request
Other supplier products
 |
White Body Rigidity Test Stand | The whole system of loading and testing process can achieve automation, intelligent to meet the different models of body detection. The test system... |
 |
Fabric Friction Charging Tester | TheFabric Friction Charging Testeris composed of a friction device and a potential measuring device, which is used to test the electrostatic charac... |
 |
Washing Fastness testing machine | G228B washing fastness tester is used for washing, dry-clean color fastness testing. Electric touch switch, LCD menu display, without mechanical co... |
 |
Car wire heat resistant water (salt water) testing machine | Scope of application: It is suitable for long-term （more than 14 days） DC voltage and salt water resistance test of automobile wire and locomotive... |
 |
Shoe Outsole Slip Resistance Tester | Theshoe and heel materials slip resistance testerhas been developed following extensive biomechanical studies and is representative of conditions e... |
Same products
 |
C500-1.7 Series High Flow Multi-Stage Centrifugal Blower /Centrifugal Blower | Seller: Greentech International (Zhangqiu) Co., Ltd | Greentech International (Zhangqiu) Co., Ltdis the professional blower supplier.Multistage Centrif... |
 |
Common Rail injector control valve F00VC01303 | Seller: China Lutong Part Plant | Common Rail injector control valve F00VC01303 Tina #Stainless Steel Cylindrical Pin# #Denso Comm... |
 |
Common Rail injector control valve F00VC01200 | Seller: China Lutong Part Plant | Common Rail injector control valve F00VC01200 Tina #Stainless Steel Cylindrical Pin# #Denso Comm... |
 |
Injector Control Valve Plate 24# | Seller: China Lutong Part Plant | Injector Control Valve Plate 24# Tina #Stainless Steel Cylindrical Pin# #Denso Common Rail Injec... |
 |
Injector Control Valve Plate 12# | Seller: China Lutong Part Plant | Injector Control Valve Plate 12# Tina #Stainless Steel Cylindrical Pin# #Denso Common Rail Injec... |
