Daorui Wear Tester (JTG E42)

• 

Applicable standards:

GB/T 19766-2005: "Natural Marble Building Board"

GB/T 9966.4-2001/2020: "Natural decorative stone test method Part 4: Wear resistance test method".

ASTM C241-90: Standard published by the American Society for Materials and Testing （ASTM）， Test method for Abrasion Resistance to Stone Subjected to Foot Traffic.

Main parameters:

Disk size: usually φ254×15mm （diameter 254mm, thickness 15mm）， which is the basic specification of the disk when wearing resistance test.

Sample size:

Square sample: 50×50±0.5mm, thickness 15-55mm.

Round sample: φ25±0.5mm, height 25-60mm.

Sample load: Usually 2000±50g or 1250±50g, this is the standard load applied to the sample to simulate the pressure in actual use.

Disk rotation speed and sample rotation speed: usually 45±1rpm or 45±2rpm, this is the disk and sample rotation speed, has an important impact on the test results.

Working hardness of the disk: usually greater than HB500, which is the hardness requirement of the disk, to ensure the stability and durability of the disk during the test.

Abrasive flow: Continuously adjustable, usually set to （65±5） g/min or other adjustable range, abrasive flow and distribution also have an impact on the test results.

Rated power consumption: Usually 0.37KW, 380V, 50Hz, which is the rated power and voltage requirements of the equipment.

Revolution control range: usually 0-9999rpm or wider range, used to set and control the number of revolutions during the test.

Другие товары поставщика

	Aircraft wire wear testing machine	Applicable standards: GJB17.9, MIL-W-81381A, MIL-T-5438 and ISO R1220, 1491 and other standards Main parameters: 1, sand belt length counting ...
	Automotive wire harness load integrated test bench	Scope of application: Meet ISO 8092.1 ——。4 series standards and QC/T417.1 —— 417.5-2001 automotive wiring harness connecto...
	Tooth composite resin wear tester	Applicable standards: YY/T 0113-2015 "Dental composite resin wear performance test method" : This standard specifies the test method of dental com...
	Carbide wear tester	Applicable standards: GB/T 34501-2017: This standard specifies the wear resistance test method of cemented carbide, which is suitable for testing ...
	Car seat component clearance test bench	Applicable standards: Car seat component clearance test benches usually follow the following domestic and international standards: QC/T 805-2008 ...

Похожие товары

	Micronized polypropylene wax for injection moulding	Продавец: Syntop chemical Co.,Ltd.	The incorporation of polypropylene micronized wax into injection moulding processes delivers the ...
	Drum Type Mobile Mixing Station	Продавец: Yousheng Machinery Equipment Co.,Ltd	Drum Type Mobile Mixing Station Drum Type Mobile Mixing StationPortable Drum Concrete Batch Plan...
	Washable Cheap 13.56Mhz 213 Nfc Mini Stickers 13.56 Mhz RFID Label Sticker Tag HF/UHF Tags Dry Inlay	Продавец: XIUCHENG RFID	Size：On request Material:PET, PVC,paper or customized Frequency:UHF/HF Printing:Thermal transf...
	Micronized wax used for industrial paint processing	Продавец: Syntop chemical Co.,Ltd.	Micronized wax is a vital functional additive in industrial paint processing, with primary functi...
	Plant Growth Regulator Manufacturer	Продавец: HEBEI LAIKE BIOTECH CO.LTD	Plant Growth Regulator Manufacturer Plant Growth Regulator Manufacturer - Laike Biotech spec...