TTF tensile testing machine
Product Introduction:
The TTF tensile testing machine is designed to provide high and stable tensile forces in tensile tests. Mostly for toys
Destructive tension test; The cylinder provides power; The clamp of the specimen can be adjusted to any suitable position.
Parameter theoretical maximum push/pull 188/168 Kgf
Maximum travel 150 mm
Speed 50-800 mm/s
Volume 1620×320×421 mm
It weighs about 81kg
1. TTF test method:
Applicable: All McDonald's products required for TTF testing.
2. Purpose:
Collect and analyze data to assess process capability and deviation of the production process to further
To evaluate the safety and reliability of the product.
equipment
3.1TTF test machine
4. Test conditions:
4.1 Room temperature: 23±2℃， humidity 20% —— 70%.
4.2TTF test machine travel speed: 0.7±0.1in/sec.
4.3TTF test engine air pressure: 60±10psi （4.2±0.7kgf/cm）
5 TTF test operation procedure:
5.1 Check/adjust the test environment to meet the requirements （room temperature: 23±2℃; Humidity 20% —— 70%）。
5.2 Check whether all components on the TTF machine are in good condition and connected/secured.
5.3 Open the air pressure pump and adjust the air pressure valve of the air pressure pump to make the air pressure of the air pressure pump meet the requirements （60±10psi）。
5.4 Adjust the pressure valve of TTF machine to make the pressure reach the requirement （60±10psi）。
5.5 Start the TTF machine and check whether the TTF machine is normal （such as whether the taxi is smooth, etc.）。
5.6 Install the tension pound and adjust the intake valve on the pneumatic machine of the TTF machine to make its travel speed reach the requirement （0.7±0.1in/sec）。
5.7 Position adjustment of TTF machine.
5.8 After alignment adjustment, secure the position.
5.9 Test fixture specified in the force bitmap /TTF test demonstration diagram.
5.10 The sample process must be placed in the required environment （room temperature 23±2℃， humidity 20% —— 70%） for 4 hours before it can be carried out.
5.11 Performing a Test.
5.12 Record the test result After the Test.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
(Ford) Automotive wire flexibility testing machine | Scope of application: Suitable for wire flexibility test with nominal cross-section ≤3.0mm2. Applicable standards: Engineering Specificatio... |
 |
Ozone Aging Chamber for Automotive Wires | The ozone aging chamber for automotive wires is used to test the ozone - resistant aging performance of rubber and its products. Applicable Stan... |
 |
Mercury Lamp Solar Aging Tester | TRANSLATE with x English Arabic Hebrew Polish Bulgarian Hindi Portuguese Catalan Hmong Daw Romanian ... |
 |
White Body Rigidity Test Stand | TRANSLATE with x English Arabic Hebrew Polish Bulgarian Hindi Portuguese Catalan Hmong Daw Romanian ... |
 |
Xenon lamp aging test chamber | TheXenon lamp aging test chamberis a photoaging tester for large-capacity textile testing. With additional sample light frame, temperature sensor a... |
Похожие товары
 |
Microcrystalline wax used for rubber plastic processing and modification | Продавец: Syntop chemical Co.,Ltd. | Microcrystalline wax has a wide range of industrial applications, primarily in the areas of rubbe... |
 |
Microcrystalline wax 80A used for lubrication and demolding | Продавец: Syntop chemical Co.,Ltd. | The core industrial applications of microcrystalline wax 80A are primarily focused on rubber prot... |
 |
Tyvek Flat Roll Pouch | Продавец: Hopeway AMD | Tyvek Flat Roll Pouch is designed for professional sterilization packaging, offering clean handli... |
 |
Industrial Warehouse Ceiling Fans | Продавец: Hebei Windmax Power Technology Co., Ltd. | Industrial Warehouse Ceiling Fans Industrial Warehouse Ceiling Fans for Warehouses, Logisti... |
 |
HVLS Ceiling Fan for Railway Station | Продавец: Hebei Windmax Power Technology Co., Ltd. | HVLS Ceiling Fan for Railway Station for Railway Station All units are CE-certified, manufa... |
