TTF tensile testing machine
Product Introduction:
The TTF tensile testing machine is designed to provide high and stable tensile forces in tensile tests. Mostly for toys
Destructive tension test; The cylinder provides power; The clamp of the specimen can be adjusted to any suitable position.
Parameter theoretical maximum push/pull 188/168 Kgf
Maximum travel 150 mm
Speed 50-800 mm/s
Volume 1620×320×421 mm
It weighs about 81kg
1. TTF test method:
Applicable: All McDonald's products required for TTF testing.
2. Purpose:
Collect and analyze data to assess process capability and deviation of the production process to further
To evaluate the safety and reliability of the product.
equipment
3.1TTF test machine
4. Test conditions:
4.1 Room temperature: 23±2℃， humidity 20% —— 70%.
4.2TTF test machine travel speed: 0.7±0.1in/sec.
4.3TTF test engine air pressure: 60±10psi （4.2±0.7kgf/cm）
5 TTF test operation procedure:
5.1 Check/adjust the test environment to meet the requirements （room temperature: 23±2℃; Humidity 20% —— 70%）。
5.2 Check whether all components on the TTF machine are in good condition and connected/secured.
5.3 Open the air pressure pump and adjust the air pressure valve of the air pressure pump to make the air pressure of the air pressure pump meet the requirements （60±10psi）。
5.4 Adjust the pressure valve of TTF machine to make the pressure reach the requirement （60±10psi）。
5.5 Start the TTF machine and check whether the TTF machine is normal （such as whether the taxi is smooth, etc.）。
5.6 Install the tension pound and adjust the intake valve on the pneumatic machine of the TTF machine to make its travel speed reach the requirement （0.7±0.1in/sec）。
5.7 Position adjustment of TTF machine.
5.8 After alignment adjustment, secure the position.
5.9 Test fixture specified in the force bitmap /TTF test demonstration diagram.
5.10 The sample process must be placed in the required environment （room temperature 23±2℃， humidity 20% —— 70%） for 4 hours before it can be carried out.
5.11 Performing a Test.
5.12 Record the test result After the Test.
在线联系供应商
Other supplier products
 |
Impact strength tester for car seat launching headrest | Applicable standards: GB 11550-2009 "Performance requirements and test methods for car seat headrest" : Appendix B of this standard specifies the ... |
 |
Flexometer / Bally Leather Flexing Tester | TRANSLATE with x English Arabic Hebrew Polish Bulgarian Hindi Portuguese Catalan Hmong Daw Romanian ... |
 |
Ultraviolet acceleration testing machine | TRANSLATE with x English Arabic Hebrew Polish Bulgarian Hindi Portuguese Catalan Hmong Daw Romanian ... |
 |
multi-finger scratch/mar tester | This type scratch tester made by Qinsun Company ismulti-functional scraping instrument.Standards:GB/T 2918，GB/T 6151，GB/T 8424.3，PV3952，BMW GS97034... |
 |
Locomotive wire dynamic cutting test machine | Applicable standards: Test requirements in EN50305EN50306:2002 Main functions: 1. Fix the sample on the steel platform, place the indenter wit... |
Same products
 |
Pipe clamp | 卖方: Yuhuan Jinyi Hardware Co., Ltd. | It is designed for secure and stable installation of various pipe systems. Featuring a robust two... |
 |
Automotive nozzles 0 433 175 510 Automotive nozzles 0433171654 | 卖方: zhonglutong | Automotive nozzles 0 433 175 510 Automotive nozzles 0433171654 Automotive nozzles 0433171719 Auto... |
 |
Automotive nozzles 0 433 175 470 Automotive nozzles 0 433 175 481 | 卖方: zhonglutong | Automotive nozzles 0 433 175 470 Automotive nozzles 0 433 175 481 Automotive nozzles 0 433 175 51... |
 |
Automotive nozzles 0 433 175 395 Automotive nozzles 0 433 175 413 | 卖方: zhonglutong | Automotive nozzles 0 433 175 395 Automotive nozzles 0 433 175 413 Automotive nozzles 0 433 175 42... |
 |
Automotive nozzles 0 433 175 294 Automotive nozzles 0 433 175 333 | 卖方: zhonglutong | Automotive nozzles 0 433 175 294 Automotive nozzles 0 433 175 333 Automotive nozzles 0 433 175 36... |
