.

Hydraulic Liner Hanger Tie-Back Assembly

The tie-back assembly is a special tie back cementingtool for tieback operation.

Tieback equipment allows existing liners with a receptacle to be extended to the surface or farther up hole, and provides a high-pressure seal at the top of a cemented or uncemented liner. TIW offers variety of tieback seal nipples and tieback packers to accommodate liner top extension and remedial operations.

Tie back liner procedureof Hydraulic Liner Hanger Tie-Back Assembly A. Preparation before casing

Measure and drift the casings carefully and clean all the threads.

Calculate the kelly-up of the casing (the particular part of the last casing which is above the rotary table) and arrange the casing string.

Prepare several casings, which are approximately 0.5m shorter than the others and convenient for kelly-up calibration. (The actual kelly-up is not equal to the calculated value due to measurement error and the remaining threads of the casings.)

  1. tie back receptacle

Connect the milling shoe and trip in. Polish the inner surface of the polished bore receptacle, make sure there is no debris.

Note the depth of the milling shoe when it reaches the top of the seal assembly (judge from the changes on pressure and WOB). Then lift the drill string for 1m.

Use a drilling rate of 40~50rpm and a normal flow rate. Slowly lower the drill string. Polish the inner surface of the polished bore receptacle twice or three times. Each time polish 3~4min. During the last polishing, apply an additional load of 2~3t when the torque suddenly increases (the milling shoe reaches the top of the seal assembly) during the last polishing. Polish for another 2~3min and note the depth of the milling shoe, which is an important clue for the casing setting depth.

Circulate with high flow rate for 5min.

Trip out and check the milling shoe. If there is a circle of polished trace and the diameter is equal to the I.D. of the left thread on the seal assembly, then the milling shoe have reached the bottom of the polished bore receptacle.

Features of Hydraulic Liner Hanger Tie-Back Assembly

With the guide shoe and circulate bore, it can stab into polished bore receptacle before cementing, more convenient than conventional cementing which pumps down cement before stabbing.

With its streamline shape, the guide shoe can stab into polished bore receptacle easily.

The Tieback Seal Assembly with three stacks of molyglass seal is designed for high-pressure and high-temperature liner tieback completions. Available in seal length is 1.2m.

Saigao Groupspecializing in design, research and development, processing and manufacturing, sales and export of machinery equipment, with leading products comprising various kind of mud pumps, down-hole motors, any kinds of screen pipes, cementing tools as well as any kinds of wellhead equipment.



Отправить запрос, связаться с поставщиком

Кому: SHANDONG SAIGAO GROUP CORPORATION
Ваш E-mail:
Текст письма:


Send to other suppliers

Другие товары поставщика

MUD PUMP
MUD PUMP Mud Pump is also a popular concept of a wide range of pumps. Different regions, habits, and ultimately the pump type will not be the same. The mud ...
Hydraulic Liner Hanger Polished Bore Receptacle
Hydraulic Liner Hanger Polished Bore Receptacle Hydraulic Polished Bore Receptacle Liner HangerMated with tie-back assembly, it can tieback the liner to the top of well and act as efficiency seal...
BW1200/7 Horizontal Double Cylinder Reciprocating Double Acting Piston Pump
BW1200/7 Horizontal Double Cylinder Reciprocating Double Acting Piston Pump BW1200/7 slurry pump is horizontal double cylinder reciprocating double action piston pump. The power has electric driving and diesel driving. It ...
Hydraulic Liner Hanger Polished Bore Receptacle
Hydraulic Liner Hanger Polished Bore Receptacle Features of Polished Bore Receptacle Liner Hanger High quality surface finish on the inner seal bore for optimum sealing property. The top end is ...
FISHING TOOLS
FISHING TOOLS The die collar fishing toolis the most widely used tool for overhauling oil and water wells. There are many varieties and specifications of fishing...
Все товары поставщика

Похожие товары

PTFE TEFLON BELLOW MECHANICAL SEALS
PTFE TEFLON BELLOW MECHANICAL SEALS Продавец: Hangzhou Sealcon Fluid Machinery Co., Ltd PTFE Teflon Bellow Mechanical Sealfor Sale China PTFE Teflon Bellow sealhas been widely applied i...
O RING MECHANICAL SEALS
O RING MECHANICAL SEALS Продавец: Hangzhou Sealcon Fluid Machinery Co., Ltd Types of O Ring Mechanical Seal We supply all standard types of materials in a range of Shore Har...
O.E.M MECHANICAL SEALS
O.E.M MECHANICAL SEALS Продавец: Hangzhou Sealcon Fluid Machinery Co., Ltd With mechanical seal factory, Sealcon is able to design and manufacture a wide range of OEM mecha...
METAL BELLOW MECHANICAL SEALS
METAL BELLOW MECHANICAL SEALS Продавец: Hangzhou Sealcon Fluid Machinery Co., Ltd Metal Bellow seals are ideal for high temperature applications and harsh chemical services where ...
Different Types of Water Pump Seals
Different Types of Water Pump Seals Продавец: Hangzhou Sealcon Fluid Machinery Co., Ltd Elastomer Rubber Bellow Mechanical Seals Developed with rubber bellow, this type of seal is widel...