.

Hydraulic Liner Hanger Tie-Back Assembly

The tie-back assembly is a special tie back cementingtool for tieback operation.

Tieback equipment allows existing liners with a receptacle to be extended to the surface or farther up hole, and provides a high-pressure seal at the top of a cemented or uncemented liner. TIW offers variety of tieback seal nipples and tieback packers to accommodate liner top extension and remedial operations.

Tie back liner procedureof Hydraulic Liner Hanger Tie-Back Assembly A. Preparation before casing

Measure and drift the casings carefully and clean all the threads.

Calculate the kelly-up of the casing (the particular part of the last casing which is above the rotary table) and arrange the casing string.

Prepare several casings, which are approximately 0.5m shorter than the others and convenient for kelly-up calibration. (The actual kelly-up is not equal to the calculated value due to measurement error and the remaining threads of the casings.)

  1. tie back receptacle

Connect the milling shoe and trip in. Polish the inner surface of the polished bore receptacle, make sure there is no debris.

Note the depth of the milling shoe when it reaches the top of the seal assembly (judge from the changes on pressure and WOB). Then lift the drill string for 1m.

Use a drilling rate of 40~50rpm and a normal flow rate. Slowly lower the drill string. Polish the inner surface of the polished bore receptacle twice or three times. Each time polish 3~4min. During the last polishing, apply an additional load of 2~3t when the torque suddenly increases (the milling shoe reaches the top of the seal assembly) during the last polishing. Polish for another 2~3min and note the depth of the milling shoe, which is an important clue for the casing setting depth.

Circulate with high flow rate for 5min.

Trip out and check the milling shoe. If there is a circle of polished trace and the diameter is equal to the I.D. of the left thread on the seal assembly, then the milling shoe have reached the bottom of the polished bore receptacle.

Features of Hydraulic Liner Hanger Tie-Back Assembly

With the guide shoe and circulate bore, it can stab into polished bore receptacle before cementing, more convenient than conventional cementing which pumps down cement before stabbing.

With its streamline shape, the guide shoe can stab into polished bore receptacle easily.

The Tieback Seal Assembly with three stacks of molyglass seal is designed for high-pressure and high-temperature liner tieback completions. Available in seal length is 1.2m.

Saigao Groupspecializing in design, research and development, processing and manufacturing, sales and export of machinery equipment, with leading products comprising various kind of mud pumps, down-hole motors, any kinds of screen pipes, cementing tools as well as any kinds of wellhead equipment.



Send product request

To: SHANDONG SAIGAO GROUP CORPORATION
Your E-mail:
Message text:


Send to other suppliers

Other supplier products

CASING CENTRALIZER
CASING CENTRALIZER A casing centralizer is a device that is mounted on a casing string to center the casing string within the wellbore. It is one of the casing access...
BW200/4 Horizontal Double Cylinder Reciprocating Double Acting Piston Pump
BW200/4 Horizontal Double Cylinder Reciprocating Double Acting Piston Pump BW200/4 mud pump is widely used in mining, drilling, coal, railway, highway, water conservancy and hydropower, bridges, high-rise buildings, founda...
Mud Pump Crosshead
Mud Pump Crosshead Mud Pump Crossheadis manufactured from high quality, cast steel and the guides are manufactured from a quality manganese bronze normally used in be...
BW400/10 Horizontal Three Cylinder Reciprocating Single Acting Piston Pump
BW400/10 Horizontal Three Cylinder Reciprocating Single Acting Piston Pump BW400/10 mud pump is widely used in mining, drilling, coal, railway, highway, water conservancy and hydropower, bridges, high-rise buildings, found...
Hydraulic Liner Hanger Polished Bore Receptacle
Hydraulic Liner Hanger Polished Bore Receptacle Features of Polished Bore Receptacle Liner Hanger High quality surface finish on the inner seal bore for optimum sealing property. The top end is ...
All supplier products

Same products

Casting Hot Fusible Film
Casting Hot Fusible Film Seller: Pinghu Zhanpeng Hot Melt Adhesive Web & Film Co., Ltd Materials:PA,PO,EVA,PES,HDPE Thickness:0.03-0.4 mm Width:6-1500 mm Melt point:85-140℃
MULTI-STAGE SELF-PRIMING PUMP HMC
MULTI-STAGE SELF-PRIMING PUMP HMC Seller: Edwin Industrial Co., Limited Applications For water supply from wells or reservoirs For domestic use, for civil and industrial...
ISHING TOOLS
ISHING TOOLS Seller: SHANDONG SAIGAO GROUP CORPORATION The fishing tool is the most widely used tool for overhauling oil and water wells. There are ma...
Fishing Magnet
Fishing Magnet Seller: SHANDONG SAIGAO GROUP CORPORATION Fishing Magnet is a junk retrieval tool designed to retrieve small metal, odd-shaped objects suc...
F500 Single-acting Mud Pump
F500 Single-acting Mud Pump Seller: SHANDONG SAIGAO GROUP CORPORATION F500 single-acting drilling rig mud pump equipment has two surfaces which can bear high strength...