TROLLEY SHOT BLASTING MACHINE
Shot blasting parts of different forms and dimensions, castings, forgings, pressed parts, parts and parts from fragile materials, cleaning of the surface, removing of casting sand and filings, consolidating of the surface before coloring, etc. Trolley type shot blast cleaning machineis designed for shot blasting of large and heavy castings, complicated shapes in small series or single production. Working pieces are loaded to a rotating table on tip truck with lifting device (crane, lift truck). This rotating table is then transported in a chamber. In the entrance of this chamber are two-sided doors.
By means of handy lifts, the workpieces are loaded on the perforated rotating working table of the trolley, which then drives to the shot blasting chamber. It is recommended that the table surface is covered with the workpieces as much as possible. It normally works with the automatic switching-on, the shot blasting time is set by means of a program. During shot blasting the workpieces move on the rotating table through the jets of abrasive of throwing wheels, which are installed under different angles, enabling higher efficiency. Then the workpieces must be turned and repeat the shot-blasting process.
Application:
Shot blasting parts of different forms and dimensions, castings, forgings, pressed parts, parts and parts from fragile materials, cleaning of the surface, removing of casting sand and filings, consolidating of the surface before coloring, etc.
Sandblasting RoomBody
The wall of the sandblasting machinebody uses a noise attenuation sandwich panel with glass wool interlayer and abrasion-resistant rubber liner. The rubber liner also has the noise attenuation function.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
| TUNNEL TYPE SHOT BLASTING MACHINE | Tunnel type shot blasting machine is a non-standard shot blasting machine that is according to workpieces information to design. The tunnel type sh... | |
| GAS CYLINDER SHOT BLASTING MACHINE | Gas cylinder shot blasting machineis used to automatically clean the surface of the cylinders by blasting of the abrasive coming from the blast tur... | |
| PIPE SHOT BLASTING MACHINE | Pipe blasting machineor internal shot blasting machineis suitable for any diameter and length of steel pipe cleaning, it can remove the oxide, rust... | |
| ANCHOR CHAIN SHOT BLASTING MACHINE | The working principle for anchor chain shot-blasting machine is mainly by numerous high speed abrasive flow projection to the anchor chain surface,... | |
| BARREL TYPE SHOT BLASTING MACHINE | The Barrel Blast Machine line provides outstanding performance and reliability. Designed for foundry, forge and heat treat requirements. The Barre... |
















