TROLLEY SHOT BLASTING MACHINE
Shot blasting parts of different forms and dimensions, castings, forgings, pressed parts, parts and parts from fragile materials, cleaning of the surface, removing of casting sand and filings, consolidating of the surface before coloring, etc. Trolley type shot blast cleaning machineis designed for shot blasting of large and heavy castings, complicated shapes in small series or single production. Working pieces are loaded to a rotating table on tip truck with lifting device (crane, lift truck). This rotating table is then transported in a chamber. In the entrance of this chamber are two-sided doors.
By means of handy lifts, the workpieces are loaded on the perforated rotating working table of the trolley, which then drives to the shot blasting chamber. It is recommended that the table surface is covered with the workpieces as much as possible. It normally works with the automatic switching-on, the shot blasting time is set by means of a program. During shot blasting the workpieces move on the rotating table through the jets of abrasive of throwing wheels, which are installed under different angles, enabling higher efficiency. Then the workpieces must be turned and repeat the shot-blasting process.
Application:
Shot blasting parts of different forms and dimensions, castings, forgings, pressed parts, parts and parts from fragile materials, cleaning of the surface, removing of casting sand and filings, consolidating of the surface before coloring, etc.
Sandblasting RoomBody
The wall of the sandblasting machinebody uses a noise attenuation sandwich panel with glass wool interlayer and abrasion-resistant rubber liner. The rubber liner also has the noise attenuation function.
在线联系供应商
Other supplier products
 |
SINGLE HOOK TYPE SHOT BLASTING MACHINE | Single hook shot blasting machineis suitable for surface cleaning or strengthening treatment of medium and small castings and forgings in the casti... |
 |
PIPE SHOT BLASTING MACHINE | PIPE SHOT BLASTING MACHINE Free Quote Pipe shot blasting machine or steel pipe blasting machineis suitable for any diameter and length of steel pi... |
 |
BARREL TYPE SHOT BLASTING MACHINE | The Barrel Blast Machine line provides outstanding performance and reliability. Designed for foundry, forge and heat treat requirements. The Barre... |
 |
MECHANICAL CNC TURRET PUNCHING PRESS MACHINE | Closed mechanical CNC turret press machineby the programming software (or manual) processing program, by the servo feeding mechanism sent the plate... |
 |
PAVERS SHOT BLASTING MACHINE | Paver shot blasting machine is mainly used for surface roughening treatment of marbles, granites, concrete products, and natural stone. It includes... |
