Rockwool Continuous Sandwich Panel Production Line
The rockwool sandwich panel production lineis one continuous and automatic line that integrates mechanism, electrical controlling, hydraulic system and polyurethane chemical reaction technology. The rock wool sandwich panel production lineadopts advanced international roll forming technology, digital servo technology, frequency conversion vector technology and hydraulic controlling technology, automatic stacking technology.
The advantages of this rock wool sandwich panel machineare the following:
1) High automatization. The wholerockwool productionline adopts one full computer integration controlling system of digital servo technology, frequency conversion vector technology and hydraulic controlling technology, which realizes whole connection, collecting control and collecting management. Adopt the cutting style of cut to length without machine stop, so that realize full automatically.
2) High efficiency. The production speed of rockwool sandwich panel machineis 3～8m/min（adjustable according to product forming requirement). The annual product capacity of this line can reach to 800000 M2 (count on the base of 250work days per year and 10 work hours per day)
3) Easy operation. Adopt collecting controlling system, using man-machine conversation. After preparing for the raw material and finishing other production requirements, input required parameters, then the machine can make the product automatically.
4) Low production cost. Developing the machine's automatization, the whole line only needs 5-8 operators to operate the machine fully, which saves much labor cost and production management cost for enterprises.
Main Parameters ofRockwool Continuous Sandwich Panel Production Line
Sandwich panel specification:
Length: Min cutting length is 2.5 m
Max cutting length is 12m
Width: (see profile drawing)
Thickness: (see profile drawing)
Raw material specification:
coil thickness: 0.4～0.6 mm (steel be flat without ups and downs, deformation and bending)
sheet yield stress: ≤235MPa
coil max width: 1250 mm (tolerance±2mm)
coil max weight: 5T
coil ID: Φ500 and Φ600 mm
coil OD: Φ1000 mm
Rock wool material: fiber length is >100mm, and the fiber should be arranged vertically, volume density is ≥70kg/m3, one-piece length is ≥3m.
EPS material: volume density is ≥18kg/m3, each edge nonstraightness is ≤1mm/m, radian is ≤3mm/m, the panel surface should be flat, roughness is ＜1.5mm/m, EPS panel one-piece length is ≥3m.
EPS material width: min width is 1/2mm of the sandwich panel width.
Machine rockwool specification:
Work line speed: 4000m/min (adjustable)
Machine length: about 70 m
Working height: 1050 mm（panel output height）
Laminating effective length: 7.5m
Control way: adopt industrial computer PLC
Total power: about 45 kw
Power: 380V/3phase/50 Hz
control voltage: 24 V/110 V/220 V
pneumatic: 0.7 Mpa (self-prepared by the factory)
best working temperature: around 25℃
Component List ofRock Wool Sandwich Panel Production Line
|
Component |
Qty |
Remarks |
|
|
1 |
5T passive decoiler (upper forming system) |
1set |
Loading capacity is ≤5t |
|
2 |
Upper roll forming machine |
1set |
With slitting and waste edge winder |
|
Lower roll forming machine |
1set |
||
|
Connecting roller of upper & lower forming system |
Each 1set |
||
|
Platform, stair and rail of upper roll forming machine |
1set |
||
|
3 |
Rock wool transfer device |
1set |
|
|
Rock wool edge cutting device |
1set |
||
|
Dust collector |
1set |
||
|
4 |
Rock wool clamp device |
Each 1 set |
|
|
5 |
Laminator host |
1set |
Effective length 7.5m |
|
6 |
Saw cutting system |
1set |
Upper & lower saw |
|
7 |
Support frame |
3sets |
|
|
8 |
Electric control system |
1set |
Zhejiang Jinggong Science & Technology Co., Ltd is a professional roll forming machine company, we provide machine rockwool, mineral wool sandwich panel machine, mineral wool sandwich panel production line, mineral wool production line, construction materials equipmentand etc. Want to know more? Please contact us.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Precast Concrete Panel Production Line | As the main component in precast concrete components, the assembly part, connection, combination of cast-in-place reinforced Concrete structure, PC... |
 |
Slitter | Our slitting machine is the auxiliary equipment used for slitting materials for rollforming machines. It is simple in structure and easy to adjust.... |
 |
Introduction of Uncoiler and Its Functions and Features | Uncoileris special equipment for sheet metal leveling. It is applied to the leveling line of steel plates and uneven plates, which can form uncoili... |
 |
C/Z Purlin Roll Forming Machine | The c purlin forming machinecan form hot/cold rolled metal strip through leveling, cold roll forming, punching and cutting off to produce C type or... |
 |
EPS Sandwich Panel Machine Line | Main structure features ofEPS Panel Machine 1) This EPS sandwich panel making machinehas the specification: nice appearance, low noise and high ef... |
