General Purpose CNC EDM Wire Cut Machine F Structure

auto cut software cnc edm

cnc high speed wire cut edm

wire cut edm software

dk7750

cnc wire cutting machine

DK7750series cnc high speed wire cut edmhas non-resistors HF power with Max cutting speed higher than 300mm2/min, Max cutting thickness is higher than 1000 mm. High accuracy linear guide way, ball screw and strong machine body with good rigidity to make sure good performance of cutting accuracy. Multiple cuts capacity is standard for better surface finish requirement.

High-speed HF power system with stable cutting speed around 170mm2/min, Max. speed around 300mm2/min, single-phase power supply, power consumption less than 1kw, it is a type of fast cut CNC EDM machine.

The machine body has been upgraded with more reinforcing ribs inside of machine bed and carriage, new designed DK77 series has a heavier machine body and better geometric accuracy.

Z axis motorized control is standard.

X and Y axis with a linear scale and digital readout.

The mechanical wire tension unit is standard.

Taiwan HIWIN linear guideway for X, Y axis, linear guideway for wire drum motion.

More accurate ball screw.

Automatic lubrication is standard.

Remote control standard cnc wire cutting machineworking.

±6°/80mm taper system is standard.

Sheet metal door of the working table.

Multiple cuts capacity, best surface finish ≤1.2μms.

AC servo motor control for X and Y axis available as optional.

Recycling tank with a high-pressure pump and paper filter.

General Purpose CNC EDM Wire Cut Machine F Structure Function Configuration of Controller

AutoCUT provides a complete integrated solution for the machining of cnc electric discharge machinefor sale. The system includes wire cut edm software/AutoCUT control software runs at the platform of Windows, PCI based drive card installed on the motherboard, high stable main board of stepper motor drive or servo motor drive, and 0.5 microseconds medium speed wire cut EDM HF power board. AutoCUT software has a plug that can be installed in AutoCAD to design cutting paths and generate cutting programming directly in AutoCAD, the design makes programming more convenient and easier to learn.

AutoCUT's Main Features

It supports graphics-driven automatic programming, customers do not need to touch the code, just the graphics settings cutting technology can be cut, at the same time, it supports by other wire cutting cnc sinker edmsoftware created by the list of 3B or G code, and only need to read and the process can be cut.

The software is embedded in AutoCAD, CAXA and some other software, and the customer only needs to know AutoCAD or other design software, is easy to use and does not require special drawing training.

Several machining modes are combined for cutting (continuous, single, forward, backward, back, etc.).

The XYUV four-axis direction is adjustable, the drive motor can be set to 5-phase 10 beats or 3-phase 5 beats, and so on.

Real-time monitoring of X, Y, U.V. and cutting.

Machining preview, real-time display of the cutting process; taper processing 3D display and tracking, zoom in and out to view graphics, front view, right view, top view, etc.

The ability to cut multiple times, as well as the customer-maintained database of cutting parameters, make multiple cuts easier and more reliable.

Belt cutting using four-axis synchronization technology, can be processed up and down different shapes of cutting convenience.

The control plate drives the four-axis motion, the work is stable and reliable.

Support sandal-on-the-card work, several electric spark wire cutters can only be controlled by one computer and cut at the same time.

With automatic alarm function, you can alarm in the event of cutting complete or failure, you can set the alarm time.

Support angle removal delay, track cutting delay, so as not to cause the impact of wire deviation.

Support screw pitch compensation to improve mechanical accuracy.

The linear scale and closed scale are supported by the servo motor to improve the positioning accuracy of the machine.

Support s3 different cutting methods: ordinary high-speed wire cutting EDM processing, medium-speed EDM wire cutting for sale coding output mode and output mode.

Power-off memory function, restore power after cutting off the data backup, in the event of a short circuit re-tracking and troubleshooting.

Automatic power off after processing is complete.

Key Functions of the AutoCUT System

The use of graphics-driven technology, reduce labor, improve work efficiency, reduce the error caused by workers.

Open to various versions of Windows XP, the software is easy to learn and use.

Directly embedded in AutoCAD, CAXA and other CAD software for a smooth combination of CAC/CAM to extend the cutting range.

Taper cutting, four-axis synchronization technology 3D design and cutting trajectory, compensation wire diameter, electrode wire diameter and large tap cutting.

Support multiple control cards to work at the same time. Many auto cut software cnc edmmachines can be controlled with just one computer, which has many AutoCUt PCI cards.

It has a database of cutting parameters, which the operator can edit, and the operator can save, edit, and read cutting parameters according to different materials, different thicknesses and required cutting properties.

AutoCUT optimizes the processing of ultra-thick workpieces (up to 1000mm) cutting, making the track stable and reliable.

Function Pic General Purpose CNC EDM Wire Cut Machine F Structure

Другие товары поставщика

	Double Heads Large CNC EDM Machine	Double heads CNC EDM has two separated spindles and controllers, travel of table is much bigger than regular big EDM machines, each head can do mac...
	EDM Machine Parts	CNC Die Sinking/Sinker EDM Machine, also known as CNC die-sinking EDM electricdischarge machine and CNC Spark Erosion Machine provided by one of th...
	General Purpose CNC EDM Wire Cut Machine F Structure	DK77 series cnc wire cutting machinehas non-resistors HF power with Max cutting speed higher than 300mm2/min, Max cutting thickness is higher than ...
	Small Hole EDM Drilling Machine For Sale	Small Hole EDM Drilling Machine For Sale Our edm drilling machine for saleare designed for the highest levels of accuracy, incredible reliability ...
	KD400GL CNC Wire Cut EDM Machine X×Y=320×400mm	CNC wire cut EDM machine KD400GL has Kingred's own designed mechanical structure and lasted developed PLC-controlled system running at the latest W...

Все товары поставщика

Похожие товары

	Палау заполнение резервуара жидким азотом Баллон KGSQ жидким азотом	Продавец: Хэнань Тяньчжидао Биотехнология Лтд.	В исследованиях в области медико-биологических наук жидкий азот является широко используемой замо...
	cuba Резервуар для подачи жидкого азота Криогенная колба Дьюара KGSQ	Продавец: Henan Tianzhidao Biological Technology Co., Ltd.	В исследованиях в области медико-биологических наук жидкий азот является широко используемой замо...
	Контейнер для заморозки ячеек Того KGSQ Полевой резервуар с жидким азотом	Продавец: Хэнань Тяньчжидао Биотехнология Лтд.	Использование резервуаров с жидким азотом охватывает научные исследования, животноводство, делика...
	Контейнер с жидким азотом в Бурунди для хранения клеток Крио-дьюар KGSQ	Продавец: Henan Tianzhidao Biological Technology Co., Ltd.	Использование резервуаров с жидким азотом охватывает научные исследования, животноводство, делика...
	Украина Контейнер для жидкого азота большого диаметра Резервуары для азота KGSQ	Продавец: Хэнань Тяньчжидао Биотехнология Лтд.	В центрах биологических образцов или научно-исследовательских учреждениях имеется большое количес...