General Purpose CNC EDM Wire Cut Machine F Structure
auto cut software cnc edm
cnc high speed wire cut edm
wire cut edm software
dk7750
cnc wire cutting machine
DK7750series cnc high speed wire cut edmhas non-resistors HF power with Max cutting speed higher than 300mm2/min, Max cutting thickness is higher than 1000 mm. High accuracy linear guide way, ball screw and strong machine body with good rigidity to make sure good performance of cutting accuracy. Multiple cuts capacity is standard for better surface finish requirement.
High-speed HF power system with stable cutting speed around 170mm2/min, Max. speed around 300mm2/min, single-phase power supply, power consumption less than 1kw, it is a type of fast cut CNC EDM machine.
The machine body has been upgraded with more reinforcing ribs inside of machine bed and carriage, new designed DK77 series has a heavier machine body and better geometric accuracy.
Z axis motorized control is standard.
X and Y axis with a linear scale and digital readout.
The mechanical wire tension unit is standard.
Taiwan HIWIN linear guideway for X, Y axis, linear guideway for wire drum motion.
More accurate ball screw.
Automatic lubrication is standard.
Remote control standard cnc wire cutting machineworking.
±6°/80mm taper system is standard.
Sheet metal door of the working table.
Multiple cuts capacity, best surface finish ≤1.2μms.
AC servo motor control for X and Y axis available as optional.
Recycling tank with a high-pressure pump and paper filter.
General Purpose CNC EDM Wire Cut Machine F Structure Function Configuration of Controller
AutoCUT provides a complete integrated solution for the machining of cnc electric discharge machinefor sale. The system includes wire cut edm software/AutoCUT control software runs at the platform of Windows, PCI based drive card installed on the motherboard, high stable main board of stepper motor drive or servo motor drive, and 0.5 microseconds medium speed wire cut EDM HF power board. AutoCUT software has a plug that can be installed in AutoCAD to design cutting paths and generate cutting programming directly in AutoCAD, the design makes programming more convenient and easier to learn.
AutoCUT's Main Features
It supports graphics-driven automatic programming, customers do not need to touch the code, just the graphics settings cutting technology can be cut, at the same time, it supports by other wire cutting cnc sinker edmsoftware created by the list of 3B or G code, and only need to read and the process can be cut.
The software is embedded in AutoCAD, CAXA and some other software, and the customer only needs to know AutoCAD or other design software, is easy to use and does not require special drawing training.
Several machining modes are combined for cutting (continuous, single, forward, backward, back, etc.).
The XYUV four-axis direction is adjustable, the drive motor can be set to 5-phase 10 beats or 3-phase 5 beats, and so on.
Real-time monitoring of X, Y, U.V. and cutting.
Machining preview, real-time display of the cutting process; taper processing 3D display and tracking, zoom in and out to view graphics, front view, right view, top view, etc.
The ability to cut multiple times, as well as the customer-maintained database of cutting parameters, make multiple cuts easier and more reliable.
Belt cutting using four-axis synchronization technology, can be processed up and down different shapes of cutting convenience.
The control plate drives the four-axis motion, the work is stable and reliable.
Support sandal-on-the-card work, several electric spark wire cutters can only be controlled by one computer and cut at the same time.
With automatic alarm function, you can alarm in the event of cutting complete or failure, you can set the alarm time.
Support angle removal delay, track cutting delay, so as not to cause the impact of wire deviation.
Support screw pitch compensation to improve mechanical accuracy.
The linear scale and closed scale are supported by the servo motor to improve the positioning accuracy of the machine.
Support s3 different cutting methods: ordinary high-speed wire cutting EDM processing, medium-speed EDM wire cutting for sale coding output mode and output mode.
Power-off memory function, restore power after cutting off the data backup, in the event of a short circuit re-tracking and troubleshooting.
Automatic power off after processing is complete.
Key Functions of the AutoCUT System
The use of graphics-driven technology, reduce labor, improve work efficiency, reduce the error caused by workers.
Open to various versions of Windows XP, the software is easy to learn and use.
Directly embedded in AutoCAD, CAXA and other CAD software for a smooth combination of CAC/CAM to extend the cutting range.
Taper cutting, four-axis synchronization technology 3D design and cutting trajectory, compensation wire diameter, electrode wire diameter and large tap cutting.
Support multiple control cards to work at the same time. Many auto cut software cnc edmmachines can be controlled with just one computer, which has many AutoCUt PCI cards.
It has a database of cutting parameters, which the operator can edit, and the operator can save, edit, and read cutting parameters according to different materials, different thicknesses and required cutting properties.
AutoCUT optimizes the processing of ultra-thick workpieces (up to 1000mm) cutting, making the track stable and reliable.
Function Pic General Purpose CNC EDM Wire Cut Machine F Structure
在线联系供应商
Other supplier products
ZNC Die Sinking EDM Machine | ZNC electrical discharge machining machine is the traditional type with X and Y axis manual control, usually operator needs to manually move the wo... | |
Small Hole EDM Drilling Machine For Sale | Small Hole EDM Drilling Machine For Sale Our edm drilling machine for saleare designed for the highest levels of accuracy, incredible reliability ... | |
EDM Wire Cut Parts | CNC Die Sinking/Sinker EDM Machine, also known as CNC die-sinking EDM electrical discharge machineand CNC Spark Erosion Machine provided by one of ... | |
CNC EDM MACHINE FOR SALE | DMNC Provides Complete Solution Of EDM Machining Technology With 30+ Years' Experience, Continuous Innovation, Strict Quality Control, and Swift ... | |
ZNC Die Sinking EDM Machine | ZNC EDMSinker has X and Y-axis manual control, and Z-axis automatic control. It can do one single job after manually set position, and job setting ... |
Same products
DM-16BF DM-18BF New cover Electric Sprayer | 卖方: Zhejiang Huaqi Information Technology Co., LTD | The Electric Knapsack Sprayer is a game-changer in the field of agricultural pest control. Engine... | |
Simple Round Breeding Cage | 卖方: Zhejiang Huaqi Information Technology Co., LTD | The Simple Round Breeding Cage features a durable and lightweight construction, making it suitabl... | |
叙利亚-细胞储存液氮容器-液氮液位报警器 | 卖方: 河南天之道生物科技有限公司 | 精准的实验条件与安全的样本存储是科研工作顺利开展的关键要素。其中,细胞储存液氮罐作为实验室不可缺少的一种设备,在样本保存方面发挥着重要的作用。 实验室用的细胞储存液氮罐,航空铝制造,重量轻、占用... | |
意大利-液氮细胞储存罐-液氮罐液位报警器 | 卖方: 河南天驰仪器设备有限公司 | 精准的实验条件与安全的样本存储是科研工作顺利开展的关键要素。其中,细胞储存液氮罐作为实验室不可缺少的一种设备,在样本保存方面发挥着重要的作用。 实验室用的细胞储存液氮罐,航空铝制造,重量轻、占用... | |
埃及-细胞储存液氮罐-液氮液位监测仪 | 卖方: Henan Tianzhidao Biological Technology Co., Ltd. | 精准的实验条件与安全的样本存储是科研工作顺利开展的关键要素。其中,细胞储存液氮罐作为实验室不可缺少的一种设备,在样本保存方面发挥着重要的作用。 实验室用的细胞储存液氮罐,航空铝制造,重量轻、占用... |