EPS Sandwich Panel Production Line
Main structure features ofEPS Sandwich PanelMachine
1) This EPS sandwich panel making machinehas the specification: nice appearance, low noise and high efficiency.
2) The EPS sandwich panel production line is welded by H-beam with shot blasting treatment on the surface, so the whole structure is simple and stable.
3) Consecutive laminating body transmission adopts worm and worm gear in order to control the producing speed steadily. The consecutive laminating body can cut to length with the advanced frequency control.
4) Three groups heating system to adapt the environmental temperature in different places.
5) Glue Providing system is driven individually. The horizontal compound, glue evenly, without any pollution.
6) Consecutive laminating body is long to guarantee the flatness of the sandwich panel.
7) The moving stroke of the cutting system is long to extend the life of the cutting tool.
Contact us forEPS sandwich panel machineprice! Or contact us for more information about othersandwich panel production machinery/line.
Main Technical Parameter of EPS Sandwich Panel Production Line
Specification ofSandwich panel produced by Jinggongsandwich panel making machine:
Length: Min cutting length is 2 m
Max cutting length is 15m
Width: (see profile drawing)
Thickness: (see profile drawing)
Raw material specification:
coil thickness: 0.4～0.6 mm (steel be flat without ups and downs, deformation and bending)
sheet yield stress: ≤235MPa
coil max width: 1200 mm (tolerance±2mm)
coil max weight: 4T
coil ID: Φ500 and Φ600 mm
coil OD: Φ1000 mm
EPS material: density is≥18㎏/m3, unstraight of each side ≤1㎜/m, curve ≤3㎜/m, surface be even, unevenness smaller than 1.5mm/m, EPS material single piece length more than 3m.
Material suitable shape: see profile drawing
Material suitable width: minimum shall be 1/2mm of the finished panel width.
EPS panel production linespecification:
Work line speed: 1000-3000mm/min (frequency speed adjustment).Attention: depending on glue brand, temperature and proficiency of operators.
Machine length: about 40 m
Working height: 1050 mm（panel output height）
Laminating effective length: 7.5m
Control way: adopt industrial computer PLC
Total power: about 35 kw
Power: 380V/3phase/50 Hz
control voltage: 24 V/110 V/220 V
pneumatic: 0.7 Mpa (self-prepared by the factory)
best working temperature: around 25℃
Main Structure Components OfEPS Sandwich Panel Production Line
This EPS sandwich panel lineconsists of one roll forming machine and one laminating machine. It adopts international roll forming technology, laminating transmission technology, air-actuated and electric & hydraulic control technology. The whole EPS panel production line only needs 6 or 7 workers.
The whole sandwich panel machine lineconsists of two parts: roll forming part and laminator part.
1) Roll forming part
The roll forming machine consists of a hydraulic uncoiler, guiding system, filming system, flat sheet slitting system, roll forming system, panel support frame, assistant forming machine and so on.
2) Laminating body
This part consists of a guiding device, laminating body, cutting system, glue feeding system, support device and electric control system, etc.
Jinggong is a professionalsandwich manufacturing companythat has many years' experience and a lot of successful cases. We have got many positive reviews regarding thiseps panel machine. If you want to know more, please contact us now!
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
C&Z Changeable Purlin Forming Machine | The control system ofC&Z purlin forming machineincludes an industrial computer, communicating with PLC through RS485 connector. The system adop... |
 |
High Speed Roll Forming Machine | The high speed formingmachine is the new type line which is produced both by our company and Formia company from Finland. The complete machine adop... |
 |
Auxiliary Equipment | Here is the different types of auxiliary equipmentof our roll forming machine: curving punching forming machine, filming and cutting machine, slitt... |
 |
Digital Folder&Slitter | This Digital Folder&slitter folderis the high&new technology product developed by our company and Hayes company from New Zealand. It is int... |
 |
H-Beam Assembling Machine | The clamping and alignment of the web plate and flange plate will be done in h beam assembly machine, there also have automatic tack-welding. Jingg... |
Похожие товары
 |
Induction Billet Heater | Продавец: Chengdu Duolin Electric Co.,Ltd | Induction Billet Heater —a specialized industrial heating system based on electromagne... |
 |
Induction Heating Equipment | Продавец: Chengdu Duolin Electric Co.,Ltd | Induction Heating Equipment DUOLIN has been founded in 1994, now is a professional factory t... |
 |
Induction Heating For Hot Bending Of Pipes | Продавец: Chengdu Duolin Electric Co.,Ltd | Induction Heating For Hot Bending Of Pipes In 2018, we received bid for BYD auto for , they ... |
 |
Induction Hardening and Tempering Of Long Bars | Продавец: Chengdu Duolin Electric Co.,Ltd | Induction Hardening and Tempering Of Long Bars is a high-tech technology developed by applyi... |
 |
Hot Forging Of Steel Billets | Продавец: Chengdu Duolin Electric Co.,Ltd | Hot Forging Of Steel Billets Induction is refered to heat the metal part to forging temperat... |
