EPS Sandwich Panel Production Line

Main structure features ofEPS Sandwich PanelMachine

1) This EPS sandwich panel making machinehas the specification: nice appearance, low noise and high efficiency.

2) The EPS sandwich panel production line is welded by H-beam with shot blasting treatment on the surface, so the whole structure is simple and stable.

3) Consecutive laminating body transmission adopts worm and worm gear in order to control the producing speed steadily. The consecutive laminating body can cut to length with the advanced frequency control.

4) Three groups heating system to adapt the environmental temperature in different places.

5) Glue Providing system is driven individually. The horizontal compound, glue evenly, without any pollution.

6) Consecutive laminating body is long to guarantee the flatness of the sandwich panel.

7) The moving stroke of the cutting system is long to extend the life of the cutting tool.

Contact us forEPS sandwich panel machineprice! Or contact us for more information about othersandwich panel production machinery/line.

Main Technical Parameter of EPS Sandwich Panel Production Line

Specification ofSandwich panel produced by Jinggongsandwich panel making machine:

Length: Min cutting length is 2 m

Max cutting length is 15m

Width: (see profile drawing)

Thickness: (see profile drawing)

Raw material specification:

coil thickness: 0.4～0.6 mm (steel be flat without ups and downs, deformation and bending)

sheet yield stress: ≤235MPa

coil max width: 1200 mm (tolerance±2mm)

coil max weight: 4T

coil ID: Φ500 and Φ600 mm

coil OD: Φ1000 mm

EPS material: density is≥18㎏/m3, unstraight of each side ≤1㎜/m, curve ≤3㎜/m, surface be even, unevenness smaller than 1.5mm/m, EPS material single piece length more than 3m.

Material suitable shape: see profile drawing

Material suitable width: minimum shall be 1/2mm of the finished panel width.

EPS panel production linespecification:

Work line speed: 1000-3000mm/min (frequency speed adjustment).Attention: depending on glue brand, temperature and proficiency of operators.

Machine length: about 40 m

Working height: 1050 mm（panel output height）

Laminating effective length: 7.5m

Control way: adopt industrial computer PLC

Total power: about 35 kw

Power: 380V/3phase/50 Hz

control voltage: 24 V/110 V/220 V

pneumatic: 0.7 Mpa (self-prepared by the factory)

best working temperature: around 25℃

Main Structure Components OfEPS Sandwich Panel Production Line

This EPS sandwich panel lineconsists of one roll forming machine and one laminating machine. It adopts international roll forming technology, laminating transmission technology, air-actuated and electric & hydraulic control technology. The whole EPS panel production line only needs 6 or 7 workers.

The whole sandwich panel machine lineconsists of two parts: roll forming part and laminator part.

1) Roll forming part

The roll forming machine consists of a hydraulic uncoiler, guiding system, filming system, flat sheet slitting system, roll forming system, panel support frame, assistant forming machine and so on.

2) Laminating body

This part consists of a guiding device, laminating body, cutting system, glue feeding system, support device and electric control system, etc.

Jinggong is a professionalsandwich manufacturing companythat has many years' experience and a lot of successful cases. We have got many positive reviews regarding thiseps panel machine. If you want to know more, please contact us now!

Other supplier products

	Auxiliary Equipment	Here is the different types auxiliary equipmentof our roll forming machine: curving punching forming machine, filming and cutting machine, slitter,...
	EPS Sandwich Panel Machine Line	Main structure features ofEPS Panel Machine 1) This EPS sandwich panel making machinehas the specification: nice appearance, low noise and high ef...
	Steel Deck Roll Forming Machine	The sheet produced by this steel roll forming machinehas high strength with big wavelength, and adheres well to concrete. Used on tall buildings,...
	H-Beam Straightening Machine	H-Beam StraighteningMachine is mainly used for the angle distortion straightening of heavy H-beam, it adopts hydraulic straightening which will hav...
	H-Beam Welding Line	Hbeam welding machineconsists of an assembling machine, front welding machine, turn-over device, back welding machine and the transmission conveyor...

All supplier products

Same products

	Nsrh150 Tri-Lobe Roots Blower/The Structure Is Simple	Seller: Greentech International (Zhangqiu) Co., Ltd	Greentech International (Zhangqiu) Co., Ltd is the professional roots blower supplier. The NSRH t...
	Laser Welding Diamond Chain For Concrete Chainsaw	Seller: Xiamen ChinShine Industry and Trade Corporation	ChinShine, a diamond cutting blade manufacturer a full line of diamond chain saws for cutting con...
	Chinshine Diamond Chain Of Diamond Chainsaw Blade For Concrete Cutting	Seller: Xiamen ChinShine Industry and Trade Corporation	Brand Name: ChinShine Place of Origin: Quanzhou, Fujian, China Chain Pitch: 3/8″ / 0.45&P...
	gardening cultivating tools	Seller: Dongyang Guorui Industry And Trade Co., Ltd.	Our gardening cultivating tools are the epitome of quality and functionality, desig...
	Tile Cutter Hand Machine	Seller: Zhejiang Shijing Tools Co., Ltd. All Rights Reserved.	Introducing a versatile manual tool designed for precision cutting of tiles. This compact device ...