Smart Card Personalization and Issuing Machine

To meet high-volumn personalization production for SIM card with multi-chips, PTA-8500A was developed and put into the market in 2015. The PTA-8500A can perform high-volumn of various SIM cards personalization including chip encoding, laser marking and card surface information verification.

With more than 100 sets delivered and proven by the market for over 8 years, the PTA-8500A smart card personalization machinehas become the mainstream SIM card personalization equipment for the most famous SIM card manufacturers in China and even in the whole world.

To meet the diversified design of banking cards and order volume, PIOTEC's flexible personalization line FPL6081 was developed. Based on a modular design, FPL6081 smart card personalization machine can be configured with function modules including magnetic encoding, contact IC encoding, contactless IC encoding, thermal printing, embossing and indenting, topping, optical visual verification & contact IC verification & contactless IC verification, the quantity for each module can be decided by customer's need.

PTM-120B can be integrated with short-circuit punching, open and short tests, chip initialization & pre-personalization as well as reject chip punching and marking. The brand-new design enables operators to switch chip production between 6PIN and 8PIN within 60 seconds. Modular design can meet your different production requirements and maximize your investment cost.

PTM-120B card personalization machine can be applied to contact/contactless and dual interface chip initialization and can also be customized according to the demands of various chip production.

Parameter of Smart Card Personalization and Issuing Machine

Item	Device name	Capacity	Overall dimensions	Weight	Source	Noise	Working temperature	Working humidity	Compressed air	Communication interface
1	PTA8500A	6000uph	3600mm×910mm×1900mm	800kg	220V(-5%~+10%) 50Hz 6KW	＜65dB	23℃±3℃	50±10%	Pressure: 0.5MpaFlow rate: 400L/min	Ethernet
2	PTA8500C	2500uph	3850mm×910mm×1900mm	1000kg	220V(-5%~+10%) 50Hz 6KW					Ethernet
3	FPL6081	2000uph	6500mm×900mm×1900mm	900kg	220V(-5%~+10%), 50Hz, 7.5KW				Pressure: 0.5MpaFlow rate: 350L/M	Ethernet
4	FPL6061								Pressure: 0.5MpaFlow rate: 350L/M	Ethernet
5	FPL6052									Ethernet
6	PTM120T	60,000 UPH (including broken reinforcement units);120,000UPH (6PIN, excluding broken reinforcement unit)	4750mm×840mm×1960mm (including broken reinforcement units);3800mm×840mm×1960mm (excluding broken reinforcement units)	800kg (including broken reinforcement units);650kg (excluding broken reinforcement units)	220V (-5%~+10%) 50Hz 4KW (including broken reinforcement unit);220V (-5%~+10%) 50Hz 2KW (excluding broken reinforcement units)				No air source required	Ethernet
7	PTCME302	33000UPH	7300mm×1200mm×2000mm	2100Kg	220V(-5%～+10%), 50Hz, 8KW				Pressure: 0.6MpaFlow rate: 1500LPM	Ethernet
8	PTE-S5000	5000UPH	2700mm×1250mm×1300mm	750kg	220V (-5%~+10%) 50Hz 6KW				Pressure: 0.5MpaFlow rate: 400L/min	Ethernet

PTA8500 Card Personalization Machine Typical Workflow

Workflow 1: Personalized Data Writing

Standard configuration: 32 contact IC card writing stations, 64 read and write heads, and 16 Paltec four in one contact readers PT204PT-AMA.

Scalable configuration: up to 64 card writing stations, 384 read and write heads, 96 Peltec four in one contact readers PT204PT-AMA. It can achieve data writing for standard cards, dual core, four core, or six core cards, meeting customers' requirements for high compatibility and high production capacity.

01

02

Workflow 2: Personalized Marking

Configure 2 sets of high-speed laser marking modules.

Configure two 50W fiber laser marking machines.

Equipped with 2 smoke purifiers.

It can achieve uninterrupted laser marking, support dual laser serial and parallel marking, and can be flexibly configured according to order conditions, thereby improving marking efficiency.

01

02

Personalized Identification Process for FPL6081 Card Personalization Machine

There are many personalized identification processes for FPL6081, including flat printing, embossing, hot stamping, etc.

Thermal Printing:

Equipped with 2 sets of monochrome thermal printing modules with resolution of 300DPI, more modules can be added on requirements.

Image formats such as BMP, GIF, TIFF, PGN are available.

Embossing and Indenting:

Equipped with 3 set of embossing and indenting character modules, , more modules can be added on requirements.

Character Plate Capacity: up to 120 characters.

12 lines with 31 characters for each can be printed, and the character spacing is arbitrarily adjusted.

Conforming with ISO standard for international credit card special character.

Topping:

Golden and silver topping are supported.

Ribbon breakage and margin detection can be executed.

FAQs of Smart Card Personalization and Issuing Machine

FAQS

What is the relationship between the data writing time and production capacity of the device?

Generally speaking, if the data writing time is longer, the production capacity will relatively decrease, and there is an inverse relationship between the two. Taking PTA-8500A as an example, the relationship between data writing time and production capacity is as follows:

Capacity table

IC write capacity table (Unit: sheets/hour)
Configuration	Personalized time(s)	17	18	20	25	35	40
32 card writing station		6000	5700	5200	4200	3000	2700
Configuration	Personalized time(s)	9	10	12	15	18	20
16 card writing station		5650	4800	4100	3300	2800	2500

High speed laser marking capacity table (Unit: sheets/hour)
Configuration	Personalized time(s)	1				2
High speed laser marking		6000	4500	4100	3700	3300	2900

Note: Capacity is calculated based on the number of cards.

What are the benefits to users of the flexible performance demonstrated by the PFL series of devices?

How long does it take for PTM-120T equipment to switch between different stripe module specifications?

Now the plastic id card making machine priceis reasonable, if you have needs to buy trading card making machine, please contact us.

Since its establishment in 2011, Piotechas been committed to the R & D, production, sales and service of smart card, eSIM and Internet of things security chip and semiconductor chip manufacturing equipment, and has grown into a well-known equipment manufacturer in the field of smart card and mobile Internet security chip production.

Другие товары поставщика

	Piotec Smart Card Making Machine	The equipment contains a number of independent research and development of core advantages of technology (whole machine research and development ca...
	PTE-S5000 Smart Card Sorting and Ranking Machine	This product is designed for various types of smart cards that comply with ISO/IEC7816 regulations. It uses visual recognition systems, contact IC ...
	Smart Card Personalization and Issuing Machine	To meet high-volumn personalization production for SIM card with multi-chips, PTA-8500A was developed and put into the market in 2015. The PTA-8500...
	SCM200 M2M Chip Personalization Machine	The SCM200 M2M chip personalization data writing machine can perform electrical performance testing, personalized data writing, and surface laser...
	PTA-8500A High Speed SIM Card Personalization Machine	To meet high-volumn personalization production for SIM card with multi-chips, PTA-8500A was developed and put into the market in 2015. The PTA-8500...

Все товары поставщика

Похожие товары

	Floral Garden Tools Set	Продавец: Dongyang Guorui Industry And Trade Co., Ltd.	Investing in a floral garden tools set not only enhances your gardening experience but also add...
	Греция-Генетические криобанки-Криоконсервация клеток	Продавец: Хэнань Тяньчжидао Биотехнология Лтд.	В наше время, когда технологии не перестают развиваться, с увеличением требований к криохранению ...
	Common Rail Fuel Injector Nozzle L500PBC	Продавец: 738347	Common Rail Fuel Injector Nozzle L500PBC 0 445 110 189 Injector Valve Set 0 445 110 190 Injector...
	Венгрия-сосуд дьюара для клеточных культур-сосуд для азота жидкого	Продавец: Henan Tianchi Instrument & Equipment Co., Ltd.	В наше время, когда технологии не перестают развиваться, с увеличением требований к криохранению ...
	Польша-Небольшой резервуар для парожидкостной фазы	Продавец: Henan Tianzhidao Biological Technology Co., Ltd.	В наше время, когда технологии не перестают развиваться, с увеличением требований к криохранению ...