.

Smart Card Personalization and Issuing Machine

To meet high-volumn personalization production for SIM card with multi-chips, PTA-8500A was developed and put into the market in 2015. The PTA-8500A can perform high-volumn of various SIM cards personalization including chip encoding, laser marking and card surface information verification.

With more than 100 sets delivered and proven by the market for over 8 years, the PTA-8500A smart card personalization machinehas become the mainstream SIM card personalization equipment for the most famous SIM card manufacturers in China and even in the whole world.

To meet the diversified design of banking cards and order volume, PIOTEC's flexible personalization line FPL6081 was developed. Based on a modular design, FPL6081 smart card personalization machine can be configured with function modules including magnetic encoding, contact IC encoding, contactless IC encoding, thermal printing, embossing and indenting, topping, optical visual verification & contact IC verification & contactless IC verification, the quantity for each module can be decided by customer's need.

PTM-120B can be integrated with short-circuit punching, open and short tests, chip initialization & pre-personalization as well as reject chip punching and marking. The brand-new design enables operators to switch chip production between 6PIN and 8PIN within 60 seconds. Modular design can meet your different production requirements and maximize your investment cost.

PTM-120B card personalization machine can be applied to contact/contactless and dual interface chip initialization and can also be customized according to the demands of various chip production.

Parameter of Smart Card Personalization and Issuing Machine

Item

Device name

Capacity

Overall dimensions

Weight

Source

Noise

Working temperature

Working humidity

Compressed air

Communication interface

1

PTA8500A

6000uph

3600mm×910mm×1900mm

800kg

220V(-5%~+10%) 50Hz 6KW

<65dB

23℃±3℃

50±10%

Pressure: 0.5MpaFlow rate: 400L/min

Ethernet

2

PTA8500C

2500uph

3850mm×910mm×1900mm

1000kg

220V(-5%~+10%) 50Hz 6KW

Ethernet

3

FPL6081

2000uph

6500mm×900mm×1900mm

900kg

220V(-5%~+10%), 50Hz, 7.5KW

Pressure: 0.5MpaFlow rate: 350L/M

Ethernet

4

FPL6061

Pressure: 0.5MpaFlow rate: 350L/M

Ethernet

5

FPL6052

Ethernet

6

PTM120T

60,000 UPH (including broken reinforcement units);120,000UPH (6PIN, excluding broken reinforcement unit)

4750mm×840mm×1960mm (including broken reinforcement units);3800mm×840mm×1960mm (excluding broken reinforcement units)

800kg (including broken reinforcement units);650kg (excluding broken reinforcement units)

220V (-5%~+10%) 50Hz 4KW (including broken reinforcement unit);220V (-5%~+10%) 50Hz 2KW (excluding broken reinforcement units)

No air source required

Ethernet

7

PTCME302

33000UPH

7300mm×1200mm×2000mm

2100Kg

220V(-5%~+10%), 50Hz, 8KW

Pressure: 0.6MpaFlow rate: 1500LPM

Ethernet

8

PTE-S5000

5000UPH

2700mm×1250mm×1300mm

750kg

220V (-5%~+10%) 50Hz 6KW

Pressure: 0.5MpaFlow rate: 400L/min

Ethernet

PTA8500 Card Personalization Machine Typical Workflow

Workflow 1: Personalized Data Writing

Standard configuration: 32 contact IC card writing stations, 64 read and write heads, and 16 Paltec four in one contact readers PT204PT-AMA.

Scalable configuration: up to 64 card writing stations, 384 read and write heads, 96 Peltec four in one contact readers PT204PT-AMA. It can achieve data writing for standard cards, dual core, four core, or six core cards, meeting customers' requirements for high compatibility and high production capacity.

01

02

Workflow 2: Personalized Marking

Configure 2 sets of high-speed laser marking modules.

Configure two 50W fiber laser marking machines.

Equipped with 2 smoke purifiers.

It can achieve uninterrupted laser marking, support dual laser serial and parallel marking, and can be flexibly configured according to order conditions, thereby improving marking efficiency.

01

02

Personalized Identification Process for FPL6081 Card Personalization Machine

There are many personalized identification processes for FPL6081, including flat printing, embossing, hot stamping, etc.

Thermal Printing:

Equipped with 2 sets of monochrome thermal printing modules with resolution of 300DPI, more modules can be added on requirements.

Image formats such as BMP, GIF, TIFF, PGN are available.

Embossing and Indenting:

Equipped with 3 set of embossing and indenting character modules, , more modules can be added on requirements.

Character Plate Capacity: up to 120 characters.

12 lines with 31 characters for each can be printed, and the character spacing is arbitrarily adjusted.

Conforming with ISO standard for international credit card special character.

Topping:

Golden and silver topping are supported.

Ribbon breakage and margin detection can be executed.

FAQs of Smart Card Personalization and Issuing Machine

FAQS

What is the relationship between the data writing time and production capacity of the device?

Generally speaking, if the data writing time is longer, the production capacity will relatively decrease, and there is an inverse relationship between the two. Taking PTA-8500A as an example, the relationship between data writing time and production capacity is as follows:

Capacity table

IC write capacity table (Unit: sheets/hour)

Configuration

Personalized time(s)

17

18

20

25

35

40

32 card writing station

6000

5700

5200

4200

3000

2700

Configuration

Personalized time(s)

9

10

12

15

18

20

16 card writing station

5650

4800

4100

3300

2800

2500

High speed laser marking capacity table (Unit: sheets/hour)

Configuration

Personalized time(s)

1

2

High speed laser marking

6000

4500

4100

3700

3300

2900

Note: Capacity is calculated based on the number of cards.

What are the benefits to users of the flexible performance demonstrated by the PFL series of devices?

How long does it take for PTM-120T equipment to switch between different stripe module specifications?

Now the plastic id card making machine priceis reasonable, if you have needs to buy trading card making machine, please contact us.

Since its establishment in 2011, Piotechas been committed to the R & D, production, sales and service of smart card, eSIM and Internet of things security chip and semiconductor chip manufacturing equipment, and has grown into a well-known equipment manufacturer in the field of smart card and mobile Internet security chip production.



Send product request

To: shenyang piotec Technology co.,LTD
Your E-mail:
Message text:


Send to other suppliers

Other supplier products

SCM200 M2M Chip Personalization Machine
SCM200 M2M Chip Personalization Machine The SCM200 M2M chip personalization data writing machine can perform electrical performance testing, personalized data writing, and surface laser...
PTM-120T Chip Module Initialization and Testing Machine
PTM-120T Chip Module Initialization and Testing Machine PTM-120B can be integrated short-circuit punching,open and short test,chip initialization & pre-personalization as well as reject chip punching...
PTA-8500A High Speed SIM Card Personalization Machine
PTA-8500A High Speed SIM Card Personalization Machine To meet high-volumn personalization production for SIM card with multi-chips, PTA-8500A was developed and put into the market in 2015. The PTA-8500...
PTA-8500C Social Security Card Personalization Machine
PTA-8500C Social Security Card Personalization Machine PTA-8500C is a new member of the 8500 series, mainly used for personalized data writing of ss card maker, Integrate highly stable contact and non-c...
DCP500 M2M Chip Programming Machine
DCP500 M2M Chip Programming Machine The DCP500 ic chip making machinecan perform electrical performance testing and personalized data writing on small batches of M2M chips, automotive...
All supplier products

Same products

DM-16BF DM-18BF New cover Electric Sprayer
DM-16BF DM-18BF New cover Electric Sprayer Seller: Zhejiang Huaqi Information Technology Co., LTD The Electric Knapsack Sprayer is a game-changer in the field of agricultural pest control. Engine...
Simple Round Breeding Cage
Simple Round Breeding Cage Seller: Zhejiang Huaqi Information Technology Co., LTD The Simple Round Breeding Cage features a durable and lightweight construction, making it suitabl...
Syria-liquid nitrogen container for cell storage-liquid nitrogen level gauge
Syria-liquid nitrogen container for cell storage-liquid nitrogen level gauge Seller: Henan Tianzhidao Biological Technology Co., Ltd Precise experimental conditions and safe sample storage are key elements for the smooth developme...
Italy-liquid nitrogen cell storage tank-liquid nitrogen tank level indicator
Italy-liquid nitrogen cell storage tank-liquid nitrogen tank level indicator Seller: Henan Tianchi Instrument & Equipment Co., Ltd. Precise experimental conditions and safe sample storage are key elements for the smooth developme...
Egypt-cryogenic cell storage-liquid nitrogen level monitors
Egypt-cryogenic cell storage-liquid nitrogen level monitors Seller: Henan Tianzhidao Biological Technology Co., Ltd. Precise experimental conditions and safe sample storage are key elements for the smooth developme...