Industrial Molding Parts

• 
• 
• 
• 

Industrial hanking mould parts are referred to the plastic parts of industrial products, HanKing Mould Enginering Ltd.preferred to think of it as non-consumer products.

Nowadays, the demand for consumer products is oversupplied, and the demand for industrial precision molded products incis increasing. This is because many parts of the equipment in the past were made of metal. With the development of the plastics industry, more and more industrial product parts are trying plasticization. Metal parts have higher density, greater strength, and thermal and electrical conductivity. However, plastic industrial parts have advantages in mechanical shock absorption, thermal expansion, elongation at break, and toughness. And the properties of plastics can be greatly transformed by the addition of fillers, reinforcing materials and modified materials, engineering plastics perform better in this respect. Use plastic to produce parts that are not necessary for high strength can reduce the weight of equipment, simplify the structure and save costs, this is why industrial molding parts are becoming more and more common.

Industrial injection molded parts chinarange from small plastic gears to large industrial equipment plastic enclosures. The design of the hanking moldis very complicated work, the plastic part structure, the different plastic resin, required life cycle, etc. many factors determine the mold construction.

Designersof Hankingtecmust master the properties of different plastics and mould steel, and consider the temperature change, pressure change, steel abrasion during the production process, designed qualified mould.

If the mould structure of hanking moulding is unreasonable, even the most excellent operator of hanking mould technology can not get good plastic parts. The design of hanking defects cannot be solved by the defects in the production process. Only when all the factors are considered in the design of the mould, the shenzhen hankingmould quality and stability of the mass production can be guaranteed.

Другие товары поставщика

	Plastic Closure Mould mrm0441	HanKing Mouldis an ISO9001: 2015 certificated factory focusing on developing and manufacturing a two-shot plastic closure mouldfor household produc...
	Plastic Insert Mold	Plastic Insert Mold 139-86 Mould Name: Plastic Insert Mold Part Material: PA + Glassfiber Product Size: 11*30*1.3 Product Description: St...
	Multi Cavity Mould	24 Cavities Plastic Injection Mold Product Name: 24 Cavities Plastic Injection MoldMold Base: LKM, HASCO, DME, etc.Mold Steel: NAK80, ASSAB8407, S1...
	Prototype Mould	Soft Prototype Mold Prototype moldis a kind of test mould before mass production mould, customer make test mould for design verification, Product ...
	Unscrewing Cap Mould 0440	2k MouldName: Unscrewing Cap Mould Part Material: PP+TPE Product Size: Product Description: Mould Cavity: Mould Size: 750*810*700mm Suitable...

Похожие товары

	Honeywell BW MicroClip Series XT-XWHM-Y-CN	Продавец: CW Green Tech	Honeywell BW MicroClip Series XT-XWHM-Y-CN The industrial Honeywell BW™ MicroClip Series i...
	High-Efficiency Sludge Dewatering Machine for Wastewater	Продавец: Apoaqua	The sludge dewatering machine produced by Apoaqua follows the principles of force and water in th...
	Climate And Vibration Combined Test	Продавец: Guangdong Yuanyao Test Equipment Co.,Ltd.	Model: YTHV-216 YTHV-343 YTHV-512 YTHV-720 YTHV-1000 Main Parameters: Temperature: 0℃/-20℃/...
	High Temperature Clean Drying Oven	Продавец: Guangdong Yuanyao Test Equipment Co.,Ltd.	Model: YCO-072 YCO-270 YCO-480 YCO-600 YCO-720 YCO-1000 Main Parameters: Dustproof class: C...
	Air-ventilation Aging Test Chamber	Продавец: Guangdong Yuanyao Test Equipment Co.,Ltd.	Model: YTAT-101 | YTAT-216 Main Parameters: Temperature range: RT+25℃～200℃（300℃） Tempera...