803E-3-S Multi-fonction Busbar bending/punching/shearing machine for copper

• 

803E-3-S Multi-fonction Busbar bending/punching/shearing machine for copper

1、Introduction
The machine is equipped with punching cutting bending three units,the three units can work at the same time,and will not influence each other.The punching unit is turret structure,the bending unit is closed on the top,the bending Angle is with storage function.The main function is processing different types of copper(brass) aluminum bus bar.when it is working,worker just need to choose the unit,then machine will cutting and punching(holes,long holes square holes special holes),horizonal bending,vertical bending embossing flatting torsional Hemp flowers ect.
2.Main Characteristic:

★SIEMENS 40 PLC control system from German, which is with Automatic shutdown function,and can control the down time of cutting unit and punching unit,it is more stable and reliable than traditional relays.
1.Punching unit is with nodular-cast-ironed and turrent typed turntable with 4/6/8 molds holes,which is a who one,so that the holes for molds(the molds is processed by our processing center) with higher precision and the clearance of the molds and turntable is 0.00-0.05mm,improving the concentricity,then the life of molds can be longer and need not change the molds so frequent.
By added punching position,the machine can locate x axis and y axis mechanical double direction location. that makes workers need not to cross lines and make punching marks ， then improving the operating efficiency and accuracy of punching.
2、Cutting unit is with double upright pillars and double blades cutting structure(Patent NO.ZL.1) the above blade and below blade are installated vertically parallelly ,make sure the cut smooth,no waste,no deformationfor longtime used.
3、Bending unit is with closed bendin,output point and force bearing force are connecting with beam of 50mm thickness,the mechanical strength is stronger than those open bendin.
4、Bending Angel is controlled by Numerical control system.Z bending can be processed through enter H (vertical height of above and below planes)and L(length of Hypotenuse) (it can calculate the angel that needed itself).When it is working ,Workers just need enter the angel and the thickness for the busbar that needed then the machine can processing the parts conviently and fast.And the machine is with storage function and erro compensation.

5、SIEMENS 40 PLC control system from German, which is with Automatic shutdown function,and can control the down time of cutting unit and punching unit,it is more stable and reliable than traditional relays。
6、Hydraulic oil tank is welded by 3mm thickness steel plate,and with phosphating,making the hydraulic oil can be used longer and will not be deterioration.
7、The machine offers the oil one to one，three cylinders/three pumps,not influence each other.
8、Cylinder oil tubes are with international A type connection,durable and easy to repair.
9、The machine is with casters,easy to move.
3.Main parts：
1、 Main Motor Juliweite 3
2、 Hydraulic Oil Cylinder Lijian (oem by taiwan) 3
3、 Electromagnetic reversing valve FENGYI 3
4、 Electromagnetic relief valve FENGYI 3
5、 AC contactor SIEMENS 3
6、 Thermal relay SIEMENS 3
7、 PLC SIEMENS 1
8、 encoder GUANGYU 1
9、 Touch screen Taiwan PlanelMaster 1
4.Random Annex：
punching molds 8sets（Φ7、Φ9、Φ11、Φ13、Φ17、Φ11×15、Φ13×17、Φ17×21）、Scissors 1set、horization bending molds 2sets（total 3）、vertical bending molds 2sets（total3）、embossing molds 1set、random repair tool 1、the standby seal ring 1bag、foot switch3。
5.Parameter：
1、Nominal pressure 800KN
2、Max size for cutting 20×260mm
3、Size of punching Φ4.3～36mm
4、Max size of horizonal nemding 20×260mm
5、Max size of vertical bending 12×120mm
6、Max size of work bench 1770mm×1600mm/1120mm×450mm
7、Size of the machine 2150mm×1750mm×1500mm
8、Weight of the machine 1970kg

Другие товары поставщика

	Automated Guided Vehicle/AGV system used in Tobacco/Warehousing and logistics/Automotive manufacturing industry	Automated Guided Vehicle/AGV system used in Tobacco/Warehousing and logistics/Automotive manufacturing industry 1.High automation，saving labor 2.AG...
	RA-DZ101 Horizontal combination drilling machine	RA-DZ101 Horizontal combination drilling machine Henan Beshine International Limited located in Luoyang, an ancient capital of China, was invested ...
	NC.40Z-1200 factory direct sell good quality CNC Busbar Bender	NC.40Z-1200 factory direct sell good quality CNC Busbar Bender Brief Introduction： NC.40Z-1200 CNC busbar bender is one processing machine of high...
	VCK-800 cheap/low price vertical single-axis CNC lathe manufacture/supplier	VCK-800 cheap/low price vertical single-axis CNC lathe manufacture/supplier Introduction This lathe is a vertical single-axis CNC lathe designed to...
	RA-CK168 intermediate driving double-end CNC lathe for semi-finish machining and finish machining	RA-CK168 intermediate driving double-end CNC lathe for semi-finish machining and finish machining double-end CNC lathe intermediate driving double-...

Похожие товары

	Китайская машина для обжатия с горячим каналом GT-JYH12 (с ЧПУ)	Продавец: Чжаосин-гуретт технолоджис лимитед	Описание Машина для обжатия с горячим каналом GT-JYH12 предназначена преимущественно для обжат...
	Китайская машина для обжатия труб GT-JY18 на 18 позиций	Продавец: Чжаосин-гуретт технолоджис лимитед	Описание Машина для обжатия трубчатых нагревателей GT-JY18 (18 позиций) является популярной мо...
	Multiple Blades Digital Label Cutter VR350	Продавец: WILLIAM CNC TECHNOLOGY	Multiple Blades Digital Label Cutter VR350 The VICUT multiple blades digital die cutterVR350, eq...
	Digital Label Die Cutting Machine VR240X	Продавец: WILLIAM CNC TECHNOLOGY	Digital Label Die Cutting Machine VR240X VR240X digital label finisheris redeveloped based on th...
	Rotary die cutting machine VR320	Продавец: WILLIAM CNC TECHNOLOGY	Rotary die cutting machine VR320 The VICUT VR320 roll to roll labels cutting machineis the most ...