803E-3-S Multi-fonction Busbar bending/punching/shearing machine for copper

803E-3-S Multi-fonction Busbar bending/punching/shearing machine for copper

1、Introduction
The machine is equipped with punching cutting bending three units,the three units can work at the same time,and will not influence each other.The punching unit is turret structure,the bending unit is closed on the top,the bending Angle is with storage function.The main function is processing different types of copper(brass) aluminum bus bar.when it is working,worker just need to choose the unit,then machine will cutting and punching(holes,long holes square holes special holes),horizonal bending,vertical bending embossing flatting torsional Hemp flowers ect.
2.Main Characteristic:

★SIEMENS 40 PLC control system from German, which is with Automatic shutdown function,and can control the down time of cutting unit and punching unit,it is more stable and reliable than traditional relays.
1.Punching unit is with nodular-cast-ironed and turrent typed turntable with 4/6/8 molds holes,which is a who one,so that the holes for molds(the molds is processed by our processing center) with higher precision and the clearance of the molds and turntable is 0.00-0.05mm,improving the concentricity,then the life of molds can be longer and need not change the molds so frequent.
By added punching position,the machine can locate x axis and y axis mechanical double direction location. that makes workers need not to cross lines and make punching marks ， then improving the operating efficiency and accuracy of punching.
2、Cutting unit is with double upright pillars and double blades cutting structure(Patent NO.ZL.1) the above blade and below blade are installated vertically parallelly ,make sure the cut smooth,no waste,no deformationfor longtime used.
3、Bending unit is with closed bendin,output point and force bearing force are connecting with beam of 50mm thickness,the mechanical strength is stronger than those open bendin.
4、Bending Angel is controlled by Numerical control system.Z bending can be processed through enter H (vertical height of above and below planes)and L(length of Hypotenuse) (it can calculate the angel that needed itself).When it is working ,Workers just need enter the angel and the thickness for the busbar that needed then the machine can processing the parts conviently and fast.And the machine is with storage function and erro compensation.

5、SIEMENS 40 PLC control system from German, which is with Automatic shutdown function,and can control the down time of cutting unit and punching unit,it is more stable and reliable than traditional relays。
6、Hydraulic oil tank is welded by 3mm thickness steel plate,and with phosphating,making the hydraulic oil can be used longer and will not be deterioration.
7、The machine offers the oil one to one，three cylinders/three pumps,not influence each other.
8、Cylinder oil tubes are with international A type connection,durable and easy to repair.
9、The machine is with casters,easy to move.
3.Main parts：
1、 Main Motor Juliweite 3
2、 Hydraulic Oil Cylinder Lijian (oem by taiwan) 3
3、 Electromagnetic reversing valve FENGYI 3
4、 Electromagnetic relief valve FENGYI 3
5、 AC contactor SIEMENS 3
6、 Thermal relay SIEMENS 3
7、 PLC SIEMENS 1
8、 encoder GUANGYU 1
9、 Touch screen Taiwan PlanelMaster 1
4.Random Annex：
punching molds 8sets（Φ7、Φ9、Φ11、Φ13、Φ17、Φ11×15、Φ13×17、Φ17×21）、Scissors 1set、horization bending molds 2sets（total 3）、vertical bending molds 2sets（total3）、embossing molds 1set、random repair tool 1、the standby seal ring 1bag、foot switch3。
5.Parameter：
1、Nominal pressure 800KN
2、Max size for cutting 20×260mm
3、Size of punching Φ4.3～36mm
4、Max size of horizonal nemding 20×260mm
5、Max size of vertical bending 12×120mm
6、Max size of work bench 1770mm×1600mm/1120mm×450mm
7、Size of the machine 2150mm×1750mm×1500mm
8、Weight of the machine 1970kg

Other supplier products

	VCK-3850 High Quality OEM Automatic vertical single-axis CNC lathe	VCK-3850 High Quality OEM Automatic vertical single-axis CNC lathe Henan Beshine International Limited located in Luoyang, an ancient capital of Ch...
	C1246 microcomputer atuomatic coiling and packing wrapping machine maufacturers	C1246 microcomputer atuomatic coiling and packing wrapping machine maufacturers ．Characteristic： wire feed by payoff or direct connect to extruder....
	303E-3-S OEM Hydraulic Busbar bending/punching/shearing machine for copper	303E-3-S OEM Hydraulic Busbar bending/punching/shearing machine for copper 1、Introduction The machine is equipped with punching cutting bending thr...
	QT6-15B Concrete Brick Paver & Curbstone Production Line	QT6-15B Concrete Brick Paver & Curbstone Production Line Concrete brick Concrete Brick Production Line Paver & Curbstone Production Line Pa...
	GS300 Coil plastic film wrapping packing machine	GS300 Coil plastic film wrapping packing machine Application: The machine is specialized for coiled objects such as steel wires, cable ，pipe coils,...

供应产品

Same products

	GT-JYH12 热流道CNC数控缩管机	卖方: 肇庆古雷特科技有限公司	产品说明 GT-JYH12 热流道CNC数控缩管机，主要用于热流道加热器、小型加热器的缩管加工。 主要参数 缩后直径：1.2–6mm 缩前最大直径：9mm ...
	GT-JY18 18 段缩管机	卖方: 肇庆古雷特科技有限公司	产品说明 GT-JY18 型 18段缩管机是一款常用的管状加热器缩管设备，采用整体式铸铁床身。由于铸铁整体床身刚性好、强度高，不易变形，可保障设备长期稳定运行。 主要参数 ...
	Multiple Blades Digital Label Cutter VR350	卖方: WILLIAM CNC TECHNOLOGY	Multiple Blades Digital Label Cutter VR350 The VICUT multiple blades digital die cutterVR350, eq...
	Digital Label Die Cutting Machine VR240X	卖方: WILLIAM CNC TECHNOLOGY	Digital Label Die Cutting Machine VR240X VR240X digital label finisheris redeveloped based on th...
	Rotary die cutting machine VR320	卖方: WILLIAM CNC TECHNOLOGY	Rotary die cutting machine VR320 The VICUT VR320 roll to roll labels cutting machineis the most ...