View larger image Chinese heavy duty lathe machine with good service Chinese heavy duty lathe machine with good service Chinese heavy duty lathe machine with good service Chinese heavy duty lathe mac
Chinese heavy duty lathe machine with good service
This machine not only processing a variety of shaft, disk type parts and turning all kinds of thread, conical and cylindrical inner and outer surfaces, but also widely used for cutting ferrous metal and nonferrous metal .
Main configuration:
1.The control system uses a wide number of funuc oi-TF (5 package).
2.1.5 m, 3 m X / Z motor with funuc feed servo motor 20Nm; 5 m, 6 m X / Z 3.motor 20 / 36Nm.
4.The main motor adopts Beijing super synchronous servo motor 30kw.
5.Shenyang vertical 4-station electric knife
6.Electrical components Schneider
7.Manual four files within the stepless speed.
Other configuration:
1.Rail width of 755, load-bearing 6 tons, can change the weight of 8 tons
2.Without semi-protection. Increase the cost of another
3.Can be added chip machine. Increase the cost of another
4.5 meters above the lead with a screw support
5.Can be changed to the overall bedside box structure plus money
6.The air box does not have air conditioning
UNIT |
CKH61200 |
||
CAPACITIES |
Swing over bed |
mm |
2000 |
Swing over carriage |
mm |
1600 |
|
Max.length of workpiece |
mm |
10000 |
|
Max.turning length |
mm |
9800 |
|
Pan of guideway |
mm |
1100 |
|
SPINDLE |
Spindle nose |
A2-15 |
|
Spindle bore |
mm |
100 |
|
Taper hole of spindle |
140 |
||
Range of spindle speeds |
r/min |
3~320 |
|
No.of spindle speeds |
Stepless speed change |
||
Max. weight of workpiece |
t |
16 |
|
Chuck |
mm |
1600 |
|
FEED |
Max.cutting power |
N |
39200 |
Rapid speeds |
mm/min |
4000/6000 |
|
Max.travel |
mm |
850 |
|
TURRET |
Turret working position |
V4 |
|
Size of turret |
mm |
380X380 |
|
Max. feed force Py |
N |
10875 |
|
Section of tool shank |
mm |
50X50 |
|
TAILSTOCK |
Dia. of tailstock quill |
mm |
260/300 |
Travel of tailstock quill |
mm |
160/300 |
|
Taperhole of tailstock |
80 |
||
OTHERS |
Workpiece accuracy |
IT7 |
|
Surface roughness |
μm |
Ra2.5~3.2 |
|
Main power |
kw |
22 |
|
Lathe mass |
kg |
30400 |
|
Length |
mm |
13400 |
|
Width/Height |
mm |
2950/2950 |
|
CNC System |
FANUC Series0i-mate-TD/0i-TD |
also called headstock, it is the main task of the main motor rotation movement coming after a series of variable speed institutions make main shaft gets the different rotating speed of the positive and negative two turn, at the same time the spindle box gives impetus to the movement into the box.
there are two layers of skateboard (medium, small skateboard), the saddle and the frame body together. Used to install the lathe tool and drive the lathe tool for longitudinal, transverse or oblique movement.
When the gear and gear ring are engaged, the four locking claws are connected, synchronously and at the same time, can hold the circular workpiece.When the gear and gear ring are separated, the four claws are independent, which are the same as the original four-jaw chuck,which are used for holding square workpieces to achieve the purpose of general purpose, which has the advantages of simple structure and convenient use.
Pre -Sale
♠Accordingtoclientsrequirement(Purchasepurpose),wecanofferserviceasfollowing:
♠Projectsystemevaluationinvestmentbudget
♠Sitemeasurement
♠Technicaldiscussion
♠Supplyprofessionaldrawingandlists
In-sale
♠Qualityguaranteed
♠Fieldserviceforequipmentinstallationandtrainingwork
♠Acceptanceanddelivery
Afer-sale
♠24honineresponse
♠Supplyingsparepartsatcostprice
♠Regularreturnvisit
Отправить запрос, связаться с поставщиком
Другие товары поставщика
View larger image Chinese heavy duty lathe machine with good service Chinese heavy duty lathe machine with good service Chinese heavy duty lathe machine with good service Chinese heavy duty lathe mac | Chinese heavy duty lathe machine with good service This machine not only processing a variety of shaft, disk type parts and turning all kinds of ... | |
Good applicability cnc lathe machines for sale | Good applicability cnc lathe machines for sale This series areeconomical and practical CNC lathe series,which are not only suitable for all kinds... | |
High strength heavy duty lathe machine on sale | High strength heavy duty lathe machine on sale Technical Parameters UNIT CW61160 CAPACITIES Swing over bed mm 1600 ... | |
Swing over bed 1250mm good applicability conventional lathe machine for sale | Good applicability conventional lathe machine for sale This series lathe is suitable for large and medium parts processing for castings, steel pa... | |
Low production cost | Product Description: Automatic bearing outer ring inner race production line: XSPT-002 bearing ring automatic line with three ADJ15P CNC lathes a... |
Похожие товары
industrial sewing machine spares | Продавец: Zhejiang Huaqi Information Technology Co., LTD | Our spares are crafted from the highest quality materials to withstand the rigors of industrial u... | |
industrial sewing machine spares | Продавец: Zhejiang Huaqi Information Technology Co., LTD | At JINZEN, we take immense pride in our diverse and comprehensive product range, catering to ever... | |
JM-600VD Velcro automatic feeder | Продавец: Zhejiang Huaqi Information Technology Co., LTD | Scope of application: Velcro. By replacing the cutting die, sewing at rounded corners, right angl... | |
Nsrh80 Tri-Lobe Roots Blower/ | Продавец: Greentech International (Zhangqiu) Co., Ltd | The NSRH type clover spiral roots blower is based on the manufacture and sales of roots blowers, ... | |
Modicon AS-B838-032 Output Module | Продавец: CW Green Tech | Modicon AS-B838-032 Output Module Part Number AS-B838-032 Manufacturer Schneider Electric Type ... |