.

MB8 CNC 8+1 Axis Hydraulic Press Brake Machine With DA66T System

MB8 CNC 8+1 Axis Hydraulic Press Brake Bending Machine for Sheet MetalWith DA66T System Introduction

1. The machines Through the CE certification.The fuselage eliminates internal stress by annealing in tempering furnace and ensures higher precision and strength.All products are designed using SOLID WORKS 3D programming to ensure the precision of bending.
2. The MB8 series electro-hydraulicbending machine for sheet metaluses CNC control system(Delem DA56s ,Dutch) to help you increase your productivity and keep the lowest cost and lower maintenance costs.High quality and repetitive bending is obtained by using synchronized cylinders and valves.
3. The latest high frequency response hydraulic control technology, high speed, high efficiency and high precision.
4. Optimal ratio of parameters and top-level core configuration ensure stable performance and easy operation.
5. Rigid upper beam runs on 8-point bearings system with bending precision of +/-0.01 mm
6. The press brake use fully closed-loop electro-hydraulic servo control technology, slider position signalsfeedbacked by bilateral gratings to CNC system to control the 2 cylinders(Y1,Y2) running on the same frequency, keeping the parallel state of the workbench.
STANDARD EQUIPMENT
1. 8- axis Dutch Delem DA66T CNC controller.
2. Full synchronization of 2 cylinders(Y1, Y1) with proportional hydraulic valve system and constant monitoring by CNC system to +/- 0.01mm accuracy.
3. Linear guide rail and ball screw accuracy of 0.01mm(HIWIN, TAIWAN).
4. Steel mono-block construction.
5. fully closed-loop electro-hydraulic servo synchronously controls the system.6. Standard electrics from Schneider, France.
7. Standard oil tube connectors from EMB Germany.
8. Standard valves and oil pump from Bosch Rexroth Germany.
9.Standard main motor from Siemens Germany.
10. Hydraulic and electrical overload protection.
11. Light guards ensure the safety of operators during operation.
12. 8+1 axes:Y1,Y2,X1,X2,Z1,Z2,R1,R2 and V axis.press-brake-machine-with-da66t-systemda66t

Dutch Delem DA56S Controller:

1.17" color LCD display. (TFT).2. 3D visualisation in simulation and production.3.2D graphical touch screen.4. Windows applications compatible.5. Delem Modusys compatibility. (module scalability and adaptivity)6.USB keyboard, mouse and flash memory drive.7. Sensor bending & correction interface.8.Step repeat up to 99 and all axes can be hand-wheel movement .9. User specific application support within the controllers multitasking environment.10.Equipped with European optical scales.11.The basic machine control functions are Y1 + Y2 + X + R –axis. A second back gauge axis can also be used as Z1 + Z2+ X1 + X2 or R2 axis.
DETAILED PICTURES
press-brake-punching-die

European standard Punch & Dies:

Standard or non-standard CNC bending machine tools can be customized for customers.

Main motor:Siemens Germany

Siemens motor used on the cnc press brake to ensure long service life and very low noise when working.
press-brake-machine-with-da66t-system-main-motor

press-brake-machine-with-da66t-system-valve

Hydraulic valve:Bosch Rexroth, Germany

  • Adopt integrated hydraulic control system, more reliable and easy for maintenance.
  • Reduced noise: the particular installation choices allow to obtain especially moderate noise levels both on machines of average capacity

Oil pump:Bosch Rexroth,Germany

  • ensure long service life and very low working noise.
  • Overload overflow protection is outfitted to hydraulic system,which can assure no leakage,and the oil level can be read or seen directly.
press-brake-machine-with-da66t-system-pump
grating-ruler

Fully-closed-loop electro-hydraulicservecontrol& Spain FAGOR grating ruler:

slider position signal is feedbacked to the controller by the grating ruler,then the CNCthe controller adjusts the amount of fuel tank by changing the synchronous valve opening size,makethe slider(Y1, Y2)running on the same frequency, maintaining the parallelstate of the worktable.

Electrics:Schneider, France

Schneider, France Stable France Schnerder Electrics Taiwan DELTA Frequency Converter to prevent X-Axis Swinging When Positioning.
press-brake-machine-with-da66t-system-schneider
press-brake-machine-with-da66t-system-photo-electric-protection

Photo-electric protection:

The detection precision reaches the highest accuracy of the international similar products 14mm,Fully guarantee the safety of the operator.

Mechanical quick clamps:

Changing the upper die safer and more efficiency.
press-brake-machine-with-da66t-system-quick-clamps
press-brake-machine-with-da66t-system-servo-motor

Servo motors:

Eight servo motors work with DA66t CNC system to control 8 axes (Y1,Y2,X1,X2,R2,R2,Z1,Z2) with high accuracy.

WEB:
COMPANY:Ma'anshan Gilde CNC Machine Tool Co.,Ltd
TEL:


Отправить запрос, связаться с поставщиком

Кому: Manshan Gilde CNC Machine Tool Co.,Ltd
Ваш E-mail:
Текст письма:


Send to other suppliers

Другие товары поставщика

Hydraulic Presses
Hydraulic Presses Hydraulic press machineare commonly used for forging, clinching, moulding, blanking, punching, deep drawing, and metal forming operations. Besides ...
Rolling Machine
Rolling Machine Abending roll machineis a machine that will roll different kinds of metal sheet and plate into a round or conical shape. It can be also called a "s...
MB8 Automatic Sheet Metal Press Brake Bending Machine With DA56S System
MB8 Automatic Sheet Metal Press Brake Bending Machine With DA56S System MB8 CNC Automatic 3+1 Axis Hydraulic Sheet Metal Press Brake Bending Machine With DA56S System Introduction 1. The design meets EU inter...
MB8 Automatic Sheet Metal Press Brake Bending Machine With DA56S System
MB8 Automatic Sheet Metal Press Brake Bending Machine With DA56S System MB8 CNC Automatic 3+1 Axis Hydraulic Sheet Metal Press Brake Bending Machine With DA56S System Introduction 1. The design meets EU internation...
WC67K NC Hydraulic Plate Press Brake With E21 Controller
WC67K NC Hydraulic Plate Press Brake With E21 Controller 1. The WC67K NC Hydraulic Press Brake-E21 design meets EU international standards. The fuselage eliminates internal stress by annealing and ens...
Все товары поставщика

Похожие товары

4000W CNC Metal Fiber Laser Cutting Machine
4000W CNC Metal Fiber Laser Cutting Machine Продавец: Цзинань FORSUN CNC Machinery Co., Ltd. Manufacturers have a variety of metal cutting methods to choose from, each of which has its own a...
Single Column Vertical Lathe
Single Column Vertical Lathe Продавец: Xilong (Shanghai) Machine Tool Co., Ltd. We strive to continuously introduce advanced technology to the industry and deliver by working cl...
Conventional Lathe
Conventional Lathe Продавец: Xilong (Shanghai) Machine Tool Co., Ltd. We strive to continuously introduce advanced technology to the industry and deliver by working cl...
Double Column Vertical Lathe
Double Column Vertical Lathe Продавец: Xilong (Shanghai) Machine Tool Co., Ltd. We strive to continuously introduce advanced technology to the industry and deliver by working cl...
CNC Machining Center
CNC Machining Center Продавец: Xilong (Shanghai) Machine Tool Co., Ltd. We strive to continuously introduce advanced technology to the industry and deliver by working cl...