MB8 CNC 8+1 Axis Hydraulic Press Brake Machine With DA66T System
MB8 CNC 8+1 Axis Hydraulic Press Brake Bending Machine for Sheet MetalWith DA66T System Introduction
1. The machines Through the CE certification.The fuselage eliminates internal stress by annealing in tempering furnace and ensures higher precision and strength.All products are designed using SOLID WORKS 3D programming to ensure the precision of bending.
2. The MB8 series electro-hydraulicbending machine for sheet metaluses CNC control system(Delem DA56s ,Dutch) to help you increase your productivity and keep the lowest cost and lower maintenance costs.High quality and repetitive bending is obtained by using synchronized cylinders and valves.
3. The latest high frequency response hydraulic control technology, high speed, high efficiency and high precision.
4. Optimal ratio of parameters and top-level core configuration ensure stable performance and easy operation.
5. Rigid upper beam runs on 8-point bearings system with bending precision of +/-0.01 mm
6. The press brake use fully closed-loop electro-hydraulic servo control technology, slider position signalsfeedbacked by bilateral gratings to CNC system to control the 2 cylinders(Y1,Y2) running on the same frequency, keeping the parallel state of the workbench.
STANDARD EQUIPMENT
1. 8- axis Dutch Delem DA66T CNC controller.
2. Full synchronization of 2 cylinders(Y1, Y1) with proportional hydraulic valve system and constant monitoring by CNC system to +/- 0.01mm accuracy.
3. Linear guide rail and ball screw accuracy of 0.01mm(HIWIN, TAIWAN).
4. Steel mono-block construction.
5. fully closed-loop electro-hydraulic servo synchronously controls the system.6. Standard electrics from Schneider, France.
7. Standard oil tube connectors from EMB Germany.
8. Standard valves and oil pump from Bosch Rexroth Germany.
9.Standard main motor from Siemens Germany.
10. Hydraulic and electrical overload protection.
11. Light guards ensure the safety of operators during operation.
12. 8+1 axes:Y1,Y2,X1,X2,Z1,Z2,R1,R2 and V axis.
Dutch Delem DA56S Controller:
1.17" color LCD display. (TFT).2. 3D visualisation in simulation and production.3.2D graphical touch screen.4. Windows applications compatible.5. Delem Modusys compatibility. (module scalability and adaptivity)6.USB keyboard, mouse and flash memory drive.7. Sensor bending & correction interface.8.Step repeat up to 99 and all axes can be hand-wheel movement .9. User specific application support within the controllers multitasking environment.10.Equipped with European optical scales.11.The basic machine control functions are Y1 + Y2 + X + R –axis. A second back gauge axis can also be used as Z1 + Z2+ X1 + X2 or R2 axis.DETAILED PICTURES
European standard Punch & Dies:Standard or non-standard CNC bending machine tools can be customized for customers. |
|
Main motor:Siemens GermanySiemens motor used on the cnc press brake to ensure long service life and very low noise when working. |
|
Hydraulic valve:Bosch Rexroth, Germany
|
|
Oil pump:Bosch Rexroth,Germany
|
|
Fully-closed-loop electro-hydraulicservecontrol& Spain FAGOR grating ruler:slider position signal is feedbacked to the controller by the grating ruler,then the CNCthe controller adjusts the amount of fuel tank by changing the synchronous valve opening size,makethe slider(Y1, Y2)running on the same frequency, maintaining the parallelstate of the worktable. |
|
Electrics:Schneider, FranceSchneider, France Stable France Schnerder Electrics Taiwan DELTA Frequency Converter to prevent X-Axis Swinging When Positioning. |
|
Photo-electric protection:The detection precision reaches the highest accuracy of the international similar products 14mm,Fully guarantee the safety of the operator. |
|
Mechanical quick clamps:Changing the upper die safer and more efficiency. |
|
Servo motors:Eight servo motors work with DA66t CNC system to control 8 axes (Y1,Y2,X1,X2,R2,R2,Z1,Z2) with high accuracy. |
WEB:
COMPANY:Ma'anshan Gilde CNC Machine Tool Co.,Ltd
TEL:
Send product request
Other supplier products
MB8 Automatic Sheet Metal Press Brake Bending Machine With DA56S System | MB8 CNC Automatic 3+1 Axis Hydraulic Sheet Metal Press Brake Bending Machine With DA56S System Introduction 1. The design meets EU inter... | |
MB8 Automatic Sheet Metal Press Brake Bending Machine With DA56S System | MB8 CNC Automatic 3+1 Axis Hydraulic Sheet Metal Press Brake Bending Machine With DA56S System Introduction 1. The design meets EU internation... | |
W11 series 3 rolls mechanical symmetrical rolling machine | 1. The design meets EU international standards.The fuselage eliminates internal stress by annealing and ensures higher precision and strength All m... | |
MB8 3+1 Axis CNC Automatic Servo Press Brake -DA58T | 1. Thebending machineis certified by the EU CE quality system.The airframe adopts annealing process to eliminate internal stress, which ensures h... | |
WC67K NC Hydraulic Plate Press Brake With E21 Controller | 1. The WC67K NC Hydraulic Press Brake-E21 design meets EU international standards. The fuselage eliminates internal stress by annealing and ens... |
Same products
Shoes Flexing Tester | Seller: Qinsun Instruments Co., Ltd | It's used for determining the flexibility resistance and or indicating the cracks od shoe or shoe... | |
Shoelace Abrasion Tester | Seller: Qinsun Instruments Co., Ltd | Application: This shoelace abrasion tester is used for shoelace against standard eyelet abrasion... | |
Heel Fatigue Tester | Seller: Qinsun Instruments Co., Ltd | Heel Fatigue Tester is used to determine the resistance of medium and high heels of ladies’... | |
Heel Impact Tester | Seller: Qinsun Instruments Co., Ltd | Heel Impact Tester is used to determine the impact strength of heels of ladies’shoes. Ap... | |
Ross Flex Tester | Seller: Qinsun Instruments Co., Ltd | Whole Sole ROSS Flexing Tester GT-KB05D To determine right angle flexing risistance for whole sol... |