Casting
Casting is one of the basic processes of modern equipment manufacturing. The casting process can be divided into three basic steps, namely casting metal preparation, mold preparation, and casting processing. Casting metal refers to the metal material used for casting castings in the production of castings. It is an alloy in which metal elements are the main components and other metals or non-metal elements are added. It is usually called casting alloy, which mainly includes cast iron, cast steel, and cast non-ferrous alloy. As a professional casting company, ECTN provides our clients with advanced metal casting servicessuch as low and high-pressure aluminum casting, custom aluminum casting, custom brass casting, permanent mold aluminum casting and etc.
Die Casting
The product uses die-casting process to complete the blank, CNC machining and polishing treatment, suitable for auto parts.
Gravity Casting
The product is a casting product, which is used to fix the support of the driven shaft. The surface is not machined and has no holes and cracks.
Processable Materials for Casting
Copper
Magnesium
Stainless Steel
Carbon Steel
Alloy Steel
Zinc Alloy
Aluminium Alloy
ABS
Aceta
Acrylic
Carbon Fibe
Fiberglass
Nylon
Polycarbonate
Spring Steel
PTEF
PVC
Neoprene
Polyethylene
Polypropylene
Polystyrene
Rubbe
Silicone
NBR
Advantage of Casting
It Can Produce Parts With Complex Shapes, Especially Blanks With Complex Cavitie
Wide Adaptability, Metal Materials Commonly Used In Industry Can Be Cast, From A Few Grams To Hundreds Of Tons.
The Shape And Size Of The Casting Are Very Close To That Of The Parts, Reducing The Amount Of Cutting, Which Is Non-cutting.
It is Widely Used
40%~70% of agricultural machinery and 70%~80% of machine tools are castings.
Casting FAQs
Casting Cracks
The solution: Use low-strength investment materials, reduce the casting temperature of the metal as much as possible, and do not use alloys with low ductility and brittleness.
Easy To Crack When Die-casting Thin-walled Products
If this problem occurs, it may be due to material problems or poor mold opening or improper selection of process parameters. Try to control the proportion of waste not to exceed 30%. The mold retention time should not be too long, about 3s per mm of wall thickness, and ejection delay is not allowed. Long, generally 0.5-2s.
Metal Splashing During Die Casting
Reinstall the mold; increase the clamping force and adjust the die-casting machine to keep the movable and fixed mold mounting plates parallel to each other; add a support plate on the movable mold to increase the rigidity of the sleeve plate.
Why Can't The Inner Processing Of Aluminum Die-casting Hole Exceed 0.25mm
In order to be suitable for die casting, people add a lot of silicon to the aluminum alloy used for die casting. When the aluminum alloy condenses in the mold, the silicon will float on the surface to form a layer of silicon film that is very hard and wear-resistant. Some OEM designers use this feature to directly design the inner surface of the die casting hole as a bearing surface. This silicon surface layer is generally only 0.2 to 0.9 mm thick. With too much processing, the life of the bearing surface will be shortened.
Unclear Marking During Casting
ETCN is a professional precious metal casting companies, titanium casting companies, iron casting companiesand machining company. We provide CNC Machining, Casting, high pressure aluminum casting, low pressure aluminum casting, vacuum pressure casting, sand casting and die castingand so on. Want to know about aluminium casting price? Please contact us.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Machining Service | 20 YEARS Professional CNC Machining Service Company ETCN was established in September 2008. After years of accumulation and development, it has... |
 |
CNC Grinding | After CNC milling or CNC turning forming, the surface roughness and behavior tolerance requirements of products are completed by cnc grinding, and ... |
 |
Stretch Forming | ETCN struggles with what to call ourselves since we are not a traditional machining servicesshop, seller, or a metal parts supplier. ETCN also prov... |
 |
CNC Milling | CNC milling processing is suitable for precision and complex parts processing, periodically repeated production parts processing, multi-station, mu... |
 |
Plastic Injection Molding | Plastic injection mold and moldingis a method of using an injection machine to quickly inject molten plastic into a mold and solidify it to obtain ... |
