Steel Deck Roll Forming Machine
The sheet produced by this steel roll forming machine has high strength with big wavelength, and adheres well to concrete. Used on tall buildings, it not only saves steel mold sheet, but also reduces the weight of the storey.
The common thickness for final products depends on different material, normally it's 0.6-1.2mm. For the recommend profiles, we can recommend the popular end products and we can also design deck roll formeraccording to your drawings.
Working process of the Steel Roll Former: Decoiling → Guided feeding → Roll forming → Cutting to length → finished panel
HG series forming machine is professional equipment for steel decking. The steel deck features a simple design, high ribs, high strands, and specially used in high story building and the large or medium-size industry or civilian construction. It helps users to simplify the construction process and save investment. The equipment has stable performance and lower power consumption, which gains customers phrases.
The self-supported steel deck wholesale production line, self-developed by Zhejiang Jinggong Science and Technology Co., Ltd., specially developed for speeding up construction, reducing the workload on spot, and saving construction cost. It is widely applied to medium and high-story steel structural construction that can save moulding for structure and to decrease the load of floor. The production line is featured by reasonable structure, good appearance, high quality, etc. It consists of truss welding line, bottom panel forming machine, and board spot welding machine, combining mechanism, electricity, hydraulic, and pneumatics with microcomputer control. It performs whole set production process of steel molding board’s truss, galvanized steel forming and assembling & welding. The line's annual single-round production capacity reaches 300 000 square meters
Technical Parameters Of Steel Deck Roll Forming Machine
|
Item |
Para |
Memo |
||
|
1 |
Suitable material |
Type |
galvanized steel, |
|
|
Thickness (mm) |
||||
|
Yield Strength (MPa) |
≤345 |
|||
|
Width (mm) |
1220 |
|||
|
2 |
Forming Speed (m/min) |
About 20 |
Not including cutting time |
|
|
3 |
Forming main motor power(KW) |
22 |
Depend on actual design |
|
|
4 |
Main hydraulic station power(KW) |
Depend on actual design |
||
|
5 |
Decoiler motor power (KW) |
Depend on actual design |
||
|
6 |
Decoiler hydraulic station power (KW) |
3 |
Depend on actual design |
|
|
7 |
Total power |
36 |
Depend on actual design |
|
|
8 |
Power |
AC480V，60Hz，3 Phase |
|
|
Supply List Of Steel Deck Roll Forming Machine
|
Name |
Remark |
||
|
1 |
Decoiler |
1set |
|
|
2 |
Guiding device |
1set |
|
|
3 |
Forming system |
1set |
|
|
4 |
Cutting system |
1set |
|
|
5 |
Output device |
1set |
|
|
6 |
Hydraulic system |
1set |
|
|
7 |
Electrical system |
1set |
Main components ofdeck floor roll forming machineThe line consists of uncoiler, transmission, roll forming, post-shearing, auto stacker, hydraulic system, controlling system, and etc.
Uncoiler
Cantilever-type fully automatic uncoiler adopts ultrasonic sensor technology and frequency inverter adjustment. The pressing arm hydraulic-driven power is optional. All electrical parts and hydraulic parts are installed inside of uncoiler frame.
Roll Forming
The roll forming system consists of a guiding device, machine base, transmission parts, and roll forming rollers, etc. The cooling and lubricating device is optional.
Post-shearing device
The post-shearing device adopts frame-type hydraulic shearing. The panel is cut stably.
Auto staker
Programming control can calculate the quantities of shear panels. and automatically stacking, moving transversally or lengthways for packing.
Hydraulic system
Hydraulic system is installed inside the machine base. The design is reasonable and compact.
Controller
Mitsubishi PLC Frequency inverter adjustment to realize fully automatic operation.
Operator
The operator can set parameters such as badges, length of panel's quantities in the touch screen
Jinggongis a professional roll forming machine company, we provide continuous sandwich panel line, sandwich panel lines, flame cutting machine for sale, etc.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
EPS Sandwich Panel Production Line | Main structure features ofEPS Sandwich Panel Machine 1) This EPS sandwich panel making machinehas the specification: nice appearance, low noise and... |
 |
PU/PIR Continuous Sandwich Panel Production Line | Continuous PU/PIR Sandwich Panel Production Line, also called polyurethane sandwich panel manufacturing line/machine, is an automatic production li... |
 |
CNC Flame Cutting Machine | The cnc flame cutting machineis a multifunctional thermal auto-cutting device combined microcomputer controlling, precise machinery and oxygen-acet... |
 |
H-Beam Straightening Machine | HBeam StraighteningMachine is mainly used for the angle distortion straightening of heavy H-beam, it adopts hydraulic straightening which will have... |
 |
EPS Sandwich Panel Production Line | Main structure features ofEPS Sandwich PanelMachine 1) This EPS sandwich panel making machinehas the specification: nice appearance, low noise and... |
Похожие товары
 |
MaAnt M061 олово волочения иглы FPC разъем позолоченный припой бар | Продавец: Shenzhen Wikshu Technology Co. | Набор паяльных штифтов MaAnt M061 с золотым покрытием и легкой ручкой из углеродного волокна для ... |
 |
High Hardness Linear Rail Flat Bed CNC Lathe | Продавец: Zhejiang Guoyu CNC Machine Tool Co., Ltd. | It can cut all kinds of turning surfaces by bicycle, such as conical surfaces, special surfaces, ... |
 |
Automation Suction Cups | Продавец: Zhejiang Shijing Tools Co., Ltd. All Rights Reserved. | The ALUMINUM SUCTION CUP 6106 D is a versatile and reliable tool designed to handle various lif... |
 |
Machinery | Продавец: O&K GROUP LIMITED | Okwishing supplies all kinds of Machinery. Okwishing () is a cross-border e-commerce platform de... |
 |
Mini Excavator Carrier Roller for Kobelco SK045/SK045SR/SK50SR/SK70SR | Продавец: Xiamen Globe Truth (GT) Industries Co., Ltd | The carrier roller use 50Mn steel, after free forging into work-piece by a 560KG air hammer, comp... |
