KRD13 High Energy Shock Test System

• 

KRD13 series pneumatic high-energy shock test system is an automatic pneumatic lifting vertical pressure mechanical shock and vibration testingequipment. The high energy test system adopts the pneumatic energy storage principle of expansion, by adjusting the internal pressure; make it in a short stroke to release high-impact energy. This novel designed high-energy shock test system is easy to operate and used to test the ability of the product to withstand shock damage in actual use, through this way we can evaluate the adaptability of the product to the impact environment and optimize the product's structural strength according to the testing data. It is an excellent evaluation of the impact resistance of a product that can effectively improve the reliability of the product in use.

FEATURES OF KRD13 HIGH ENERGY SHOCK TEST SYSTEM

Full pneumatic drive, clean and environmentally friendly, with good repeatability and high reliability

The impact energy is large, and the shock test of 70g @45ms can be easily realized

Control system based on Windows,all operations are completed on the computer, which is convenient to use and fully automatic

IPS-2000 softwareintegrates shock and vibration tablecontrol and data collection, making the equipment easy to operate and calibration

Advanced energy storage expansion shock mode:the expansion shock air pressure energy storage system used with pneumatic lifting can achieve the shock energy that cannot be achieved by the free-fall classic impact, and can meet the requirements of various high shock end speeds

High efficiency & high precision:the advanced pneumatic drive and control system greatly improves the efficiency of shock test

Convenient installation:the equipment comes with a base, due to the short driving stroke of the pneumatic cylinder, small footprint

Safety protection:the controller has functions of door protection, runaway protection, and zero signal protection to ensure the safety of the system

Shock amplifierscan be configured to achieve larger magnitude shock tests

TABLE OF KRD13 HIGH ENERGY SHOCK TEST SYSTEM

KRD13 series pneumatic high-energy shock test system is composed of three parts: a table body, a pneumatic control system, and an electrical control measurement system.

KRD13 series pneumatic high-energy shock test system is a pneumatic lifting vertical pressure shock tester. The air pressure storage-release system is adopted, and the free-fall impact is optimized and upgraded to an energy storage expansion shock system. The shock energy is greatly improved, and a larger shock end velocity is reached, thereby realizing a large shock overload that a free-fall impact table cannot achieve at the same height.

The high-energy shock vibration testingtable mainly includes a working table, impact plate, guiding shaft, expansion impact cylinder, locking unit, absorber, base, etc.

DUAL MASS SHOCK AMPLIFIER OF KRD13 HIGH ENERGY SHOCK TEST SYSTEM

The shock amplifier is a device that uses the rebound energy of the ordinary impact shock table to realize the opposite impact between the servo table and the seat on the amplifier, so that the impact acceleration is multiplied.

WAVEFORM GENERATORS OF KRD13 HIGH ENERGY SHOCK TEST SYSTEM

KRD13 series pneumatic high-energy shock test system is equipped with a half-sine wave generator. The half-sine wave generator is mainly made of engineering rubber (considering the stiffness and cohesive force of rubber) and felt pads of various thicknesses. Different thicknesses are connected in series to form multiple stiffnesses to achieve different shock pulse widths. Optional for post-peak sawtooth wave generator which is lead cone; trapezoidal wave generator air source is high-pressure nitrogen, the pressure range is 1-10MPa, and the overload value can be adjusted between 10-100g, as shown in the following figure:

Now the price of mechanical testing systemis reasonable, if you have needs to buy mechanical test equipment, please contact us.

Другие товары поставщика

	KRD102 Clamping Force Tester	KRD102 Clamping Force Tester KRD102 series clamp force testeris newly developed multi-functional economical carton quality inspection equipment, m...
	KRD10 Hydraulic Vertical Shock Test System	KRD10 Hydraulic Vertical Shock Test System KRD10series is a full-automatic hydraulic lifting vertical shock testing machine, with the state-of-the...
	KRD42 DOUBLE LIFT ZERO DISTANCE DROP TEST MACHINE	KRD42 series zero-distance drop tester is double lifting drop test machine, which is mainly used for packaging goods that will be impacted by a ver...
	KRD14 Pneumatic Vertical Shock Response Spectrum Test System	KRD14 series shock response spectrum test system is full pneumatic driven vertical lifting SRS test equipmentwith special design, easy operation, r...
	KRD50 TRANSPORTATION SIMULATION VIBRATION TESTING MACHINE	KRD50 transportation vibration testercan replace the actual running automotive test to complete the road transportation simulation test of packaged...

Похожие товары

	Wax injection	Продавец: Yihui casting Technology Co., Ltd.	Wax injection This category mainly includes the MAXWAX brand wax injection machinesdeveloped and...
	Moulding tools	Продавец: Yihui casting Technology Co., Ltd.	Moulding tools Casting supplies a complete range of jewellery moulding tools designed for profes...
	Moulding machines	Продавец: Yihui casting Technology Co., Ltd.	Moulding machines YihuiCasting provides advanced mold making equipments for jewelry designed for...
	3D printer	Продавец: Yihui casting Technology Co., Ltd.	3D printer YihuiCasting provides advanced 3d jewelry printers designed for modern jewelry produc...
	3D Design	Продавец: Yihui casting Technology Co., Ltd.	3D Design This category includes all 3D printers and relevant spare parts like release films, re...