KRD13 High Energy Shock Test System
KRD13 series pneumatic high-energy shock test system is an automatic pneumatic lifting vertical pressure mechanical shock and vibration testingequipment. The high energy test system adopts the pneumatic energy storage principle of expansion, by adjusting the internal pressure; make it in a short stroke to release high-impact energy. This novel designed high-energy shock test system is easy to operate and used to test the ability of the product to withstand shock damage in actual use, through this way we can evaluate the adaptability of the product to the impact environment and optimize the product's structural strength according to the testing data. It is an excellent evaluation of the impact resistance of a product that can effectively improve the reliability of the product in use.
FEATURES OF KRD13 HIGH ENERGY SHOCK TEST SYSTEM
Full pneumatic drive, clean and environmentally friendly, with good repeatability and high reliability
The impact energy is large, and the shock test of 70g @45ms can be easily realized
Control system based on Windows,all operations are completed on the computer, which is convenient to use and fully automatic
IPS-2000 softwareintegrates shock and vibration tablecontrol and data collection, making the equipment easy to operate and calibration
Advanced energy storage expansion shock mode:the expansion shock air pressure energy storage system used with pneumatic lifting can achieve the shock energy that cannot be achieved by the free-fall classic impact, and can meet the requirements of various high shock end speeds
High efficiency & high precision:the advanced pneumatic drive and control system greatly improves the efficiency of shock test
Convenient installation:the equipment comes with a base, due to the short driving stroke of the pneumatic cylinder, small footprint
Safety protection:the controller has functions of door protection, runaway protection, and zero signal protection to ensure the safety of the system
Shock amplifierscan be configured to achieve larger magnitude shock tests
TABLE OF KRD13 HIGH ENERGY SHOCK TEST SYSTEM
KRD13 series pneumatic high-energy shock test system is composed of three parts: a table body, a pneumatic control system, and an electrical control measurement system.
KRD13 series pneumatic high-energy shock test system is a pneumatic lifting vertical pressure shock tester. The air pressure storage-release system is adopted, and the free-fall impact is optimized and upgraded to an energy storage expansion shock system. The shock energy is greatly improved, and a larger shock end velocity is reached, thereby realizing a large shock overload that a free-fall impact table cannot achieve at the same height.
The high-energy shock vibration testingtable mainly includes a working table, impact plate, guiding shaft, expansion impact cylinder, locking unit, absorber, base, etc.
DUAL MASS SHOCK AMPLIFIER OF KRD13 HIGH ENERGY SHOCK TEST SYSTEM
The shock amplifier is a device that uses the rebound energy of the ordinary impact shock table to realize the opposite impact between the servo table and the seat on the amplifier, so that the impact acceleration is multiplied.
WAVEFORM GENERATORS OF KRD13 HIGH ENERGY SHOCK TEST SYSTEM
KRD13 series pneumatic high-energy shock test system is equipped with a half-sine wave generator. The half-sine wave generator is mainly made of engineering rubber (considering the stiffness and cohesive force of rubber) and felt pads of various thicknesses. Different thicknesses are connected in series to form multiple stiffnesses to achieve different shock pulse widths. Optional for post-peak sawtooth wave generator which is lead cone; trapezoidal wave generator air source is high-pressure nitrogen, the pressure range is 1-10MPa, and the overload value can be adjusted between 10-100g, as shown in the following figure:
Now the price of mechanical testing systemis reasonable, if you have needs to buy mechanical test equipment, please contact us.
Send product request
Other supplier products
 |
SRS Test Equipment | WHAT IS SHOCK RESPONSE SPECTRUM? The traditional shock test (also known as the classic shock test) mainly simulates the actual shock environment b... |
 |
KRD13 HIGH ENERGY SHOCK TEST SYSTEM | KRD13 series pneumatic high-energy shock test system is an automatic pneumatic lifting vertical pressure shock testing equipment. The high energy t... |
 |
Package Testing Equipment | WHAT IS PACKAGE TESTING? Packaging testsor packaging testing involves the test and measurement of a characteristic or property involved with packa... |
 |
WHAT IS TRANSPORT VIBRATION SIMULATION TESTING? | As one important part of the packaging test, the transport simulation vibration testing machineis to simulate the transport vibration environment i... |
 |
KRD300 MOMENT OF INERTIA MEASUREMENT SYSTEM | Mass Moment of Inertia (Moment of Inertia) is a measure of an object's resistance to change in rotation direction. Moment of Inertia has the same r... |
Same products
 |
Uratech ER16 Collet Rack – CNC Collet Storage for ER, DR & RD 16 Series | Seller: Uratech USA Inc | TheUratech ER16 collet rackis a premium storage solution designed for CNC shops, toolrooms, and m... |
 |
Uratech Tool scoot cart for 50 taper tool holders | Seller: Uratech USA Inc | Maximize efficiency in your machining operations with our50 taper CNC tool carts, the ultimate so... |
 |
3 in1 Decoiler Leveler Feeder | Seller: Dongguan YouYi Precision Automation Equipment Co., Ltd. | 3 in1 Decoiler Leveler Feeder For Thin Plate（0.3-3.2mm） The 3-in-1 servo feederintegrates four f... |
 |
NC Servo Feeder (0.1-3.0mm) | Seller: Dongguan YouYi Precision Automation Equipment Co., Ltd. | NC Servo Feeder (0.1-3.0mm) Our standard servo feederis engineered for precision coil feeding of... |
 |
Uratech 40 Taper CNC Tower – CAT 40 Tool Cart & CNC Tool Holder Storage | Seller: Uratech USA Inc | TheUratech 40 Taper CNC Toweris the ultimate solution for organizing and protecting your CNC tool... |
