.

Water-borne Inorganic Zinc-Rich Anticorrosive Primer

The waterborne inorganic zinc primer coating, like the solvent-based inorganic zinc-rich paint, is rich in metallic zinc powder as an anti-rust pigment, which is in close contact in the paint film and tightly connected with the steel surface. It forms good electrical conductivity with the steel and plays a role of electrochemical protection. Even if the coating is partially damaged, the rust will not spread to the surrounding like other organic coatings. Since the water-based inorganic zinc-rich coating does not need to add any solvent or media solvent, the VOC value is 0.

Advantage of Waterborne inorganic zinc primers

Good cathodic protection

Good gas cutting and welding property

Good matching with epoxy paint, acrylic paint and polyurethane paint.

Good long-term corrosion prevention.

Excellent wear resistance, maximum 400℃ heat resistance, bending resistance

Specification of Waterborne Inorganic Zinc-rich Anticorrosive Primer

Type

Water based coating

Solid Content

87%

Mixing Ratio

two components base : hardener=2:1 by weight

Dry Film Thickness

50μm per coat

Specific Gravity

Coverage Rate (Theoretical)

Drying Time

Temperature

5℃

10℃

20℃

30℃

Dry to touch

12mins

10mins

8mins

5mins

Dry Hard

2hrs

1hrs

Package

30kgs for one kit, part A 20kgs, part B 10kgs

We are apaint companies in china. we provide marine boat bottom paint, Water-borne Primer, inorganic zinc rich, organic vs inorganic zinc primer, inorganic zinc paint, polyurethane paintand etc. Want to know more, contact us.


Отправить запрос, связаться с поставщиком

Кому: Tianjin Jinhai Special Coatings & Decoration Co., Ltd
Ваш E-mail:
Текст письма:


Send to other suppliers

Другие товары поставщика

Epoxy Enamel
Epoxy Enamel Epoxy enamel is a two-component self-drying paint composed of epoxy resin, pigments, additives, solvents and curing agents. The epoxy anti rust pai...
DRINKING WATER TANK PAINT
DRINKING WATER TANK PAINT Before the 1950s, water tank inside paint on ships worldwide were protected by cement slurry. It has proved that the cement slurry is very brittle ...
Waterborne Acrylic Coating
Waterborne Acrylic Coating The water based acrylic coatingis composed of acrylic emulsion, pigments, etc. The water borne acrylictopcoat is a one-component coating with water...
Moisture Curing Epoxy Coal Tar Paint
Moisture Curing Epoxy Coal Tar Paint Moisture curing epoxy asphalt paintis composed of special epoxy resin, coal tar pitch, anti-corrosion pigments and fillers, water-increasing additi...
Chlorinated Rubber Anticorrosive Intermediate Coat (Gray)
Chlorinated Rubber Anticorrosive Intermediate Coat (Gray) Under FUXI® brand, Jinhai Special industrial protective coatinghas developed our own formulation system, including epoxy, phenolic, alkyd, acry...
Все товары поставщика

Похожие товары

Uratech ER16 Collet Rack – CNC Collet Storage for ER, DR & RD 16 Series
Uratech ER16 Collet Rack – CNC Collet Storage for ER, DR & RD 16 Series Продавец: Uratech USA Inc TheUratech ER16 collet rackis a premium storage solution designed for CNC shops, toolrooms, and m...
Uratech Tool scoot cart for 50 taper tool holders
Uratech Tool scoot cart for 50 taper tool holders Продавец: Uratech USA Inc Maximize efficiency in your machining operations with our50 taper CNC tool carts, the ultimate so...
3 in1 Decoiler Leveler Feeder
3 in1 Decoiler Leveler Feeder Продавец: Dongguan YouYi Precision Automation Equipment Co., Ltd. 3 in1 Decoiler Leveler Feeder For Thin Plate(0.3-3.2mm) The 3-in-1 servo feederintegrates four f...
NC Servo Feeder (0.1-3.0mm)
NC Servo Feeder (0.1-3.0mm) Продавец: Dongguan YouYi Precision Automation Equipment Co., Ltd. NC Servo Feeder (0.1-3.0mm) Our standard servo feederis engineered for precision coil feeding of...
Uratech 40 Taper CNC Tower – CAT 40 Tool Cart & CNC Tool Holder Storage
Uratech 40 Taper CNC Tower – CAT 40 Tool Cart & CNC Tool Holder Storage Продавец: Uratech USA Inc TheUratech 40 Taper CNC Toweris the ultimate solution for organizing and protecting your CNC tool...