CHEMICAL PLANT PAINT
The cooling tower is a large-scale reinforced concrete structure, which is mainly composed of a cast-in-place reinforced concrete reservoir, a tower and a water spraying facility. It is most used in the chemical, petroleum, textile, and medicine industry.
The corrosion of cooling towers includes reinforced concrete corrosion and steel components corrosion. During the long-term use of natural cooling towers, due to medium erosion, plus corrosion of CO2 and chloride ions in the air, the corrosion effects of microorganisms and freeze-thaw cycles, various concrete components, including cooling tower air ducts, water-spraying structure beams and pillars, and water reservoir, will get loose, powdered, and peeled off, then causes corrosion of the steel bars inside. The anti-corrosion treatment measures taken for conventional cooling towers generally apply anti-corrosion paint on the surface of the concrete. Conventional cooling tower coatingsinclude chlorinated rubber anticorrosive coatings, high chlorinated polyethylene anticorrosive coatings, chlorosulfonated polyethylene anticorrosive coatings, polyurethane anticorrosive coatings, modified acrylic anticorrosive coatings, alkyd resin anticorrosive coatings, epoxy anticorrosive coatings, etc.
Features of Chemical cooling tower paint
Factors influencing anticorrosion service life of reinforced concrete structure
There are many factors that affect the anticorrosion serving life of reinforced concrete structures, but the main factors are adhesion and corrosion resistance property. In the cooling tower, the temperature in the high-temperature zone is 30-80°C. The anti-corrosion coating can be used for a long time at this temperature, and the circulating water will not cause obvious damage to the anti-corrosion layer.
The main problem in cooling towers is permeability resistance
cooling tower epoxy paint has strong adhesion, tough paint film, strong moisture, and water resistance. Pure epoxy resin paint and modified epoxy glass flake coatings are also the most frequently used heavy-duty anticorrosive coatings for cooling towers, especially seawater cooling towers.
We are aprotective coating manufacturer. we provide marine boat bottom paint, bottom coat paint for boats, interior wall paintand etc. Want to know more, contact us.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Chlorinated Rubber Anticorrosive Intermediate Coat (Gray) | Chlorinated rubber anticorrosive intermediate paint is formulated as an anti-corrosion undercoat. It has excellent anti-corrosion performance, wate... |
 |
FUXI ® ACRYLIC PAINT | Acrylic resin has high hardness, full coating film, good heat resistance, water resistance, solvent resistance, chemical resistance, and good weath... |
 |
High Build Epoxy Zinc-rich Primer( CE certificate ) | Thick build epoxy zinc-rich primer is an epoxy zinc-rich primer with thick coating properties. The thickness of 70μm～80μm can be reached b... |
 |
Non-Carbon Epoxy Antistatic Anticorrosive Finish | The non-carbon epoxy Antistatic Finishis a topcoat that prevents the generation and accumulation of static electricity charge on the inner wall of ... |
 |
Water-borne Inorganic Zinc-Rich Anticorrosive Primer | The waterborne inorganic zinc primer coating, like the solvent-based inorganic zinc-rich paint, is rich in metallic zinc powder as an anti-rust pig... |
