ROCK REAMER
There is no fixed tooth shape and bearing for the hole opener bit, so it is necessary to select appropriate tooth shape and bearing structure according to different stratum structure. It adopts the palm back tilt, cold inlaid anti - ruin gold design, with the roller anti-peeling structure, mainly to prevent the roller falling off after the roller bearing is damaged, resulting in the accident in the hole. The hdd rock reameris suitable for horizontal directional drilling construction, with high design strength, good wear resistance, long service life and good safety performance. The reaming size is 220~1600mm.
What Are Rock ReamerMade Of?
01
The Structure Of The Rock ReamerIs Shown In The Figure
The hole openermostly uses the single tooth palm of the cone bit and the cone as one cutting edge,
02
With The Number Of Cutting Edges At Least 3
The cone reamer is composed of a rear centering plate, a rear baffle.
03
A Mandrel
A front baffle, a front centering ring, a front centering plate, a cone, and a tooth palm.
04
The Reamer Uses Welding Process To Connect And Fix The Components.
In the process of hole reaming, the screw drill provides torque and the drill provides tension.
There are many drill bit manufacturers, but we are one of the best choices for you.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
PDC BITS- MAKE MAXIMIZE PERFORMANCE | PDC Bit for Sale PDC bits are polycrystalline diamond compact bits. PDC bits are widely used in oil drilling because of their fast drilling speed, ... |
 |
5 Wings PDC Drag Bit | Drag bits for water well drilling by using a polycrystalline diamond compact cutter, has high hardness and wear resistance, the drag bit blade betw... |
 |
Steel PDC Drill Bit | The entire bit body of the PDC steel bit is made of medium carbon steel and machined using a fabrication process. The bit crown is treated with a s... |
 |
Matrix PDC Drill Bit | PDC matrix bitis a kind of cutting bit that weld the diamond composite piece on the drill head body by brazing. PDC matrix bitis sintered with tung... |
 |
PDC DRAG BIT | The PDC drilling drag bitconsists of four parts: the bit body, the scraper blade, the water divider cap and the nozzle. The drill body is the body ... |
