ROCK REAMER
There is no fixed tooth shape and bearing for the hole opener bit, so it is necessary to select appropriate tooth shape and bearing structure according to different stratum structure. It adopts the palm back tilt, cold inlaid anti - ruin gold design, with the roller anti-peeling structure, mainly to prevent the roller falling off after the roller bearing is damaged, resulting in the accident in the hole. The hdd rock reameris suitable for horizontal directional drilling construction, with high design strength, good wear resistance, long service life and good safety performance. The reaming size is 220~1600mm.
What Are Rock ReamerMade Of?
01
The Structure Of The Rock ReamerIs Shown In The Figure
The hole openermostly uses the single tooth palm of the cone bit and the cone as one cutting edge,
02
With The Number Of Cutting Edges At Least 3
The cone reamer is composed of a rear centering plate, a rear baffle.
03
A Mandrel
A front baffle, a front centering ring, a front centering plate, a cone, and a tooth palm.
04
The Reamer Uses Welding Process To Connect And Fix The Components.
In the process of hole reaming, the screw drill provides torque and the drill provides tension.
There are many drill bit manufacturers, but we are one of the best choices for you.
Send product request
Other supplier products
 |
PDC BIT | Big blade design: The blades of all PDC drilling series are raised and increased. Using oversized crumb running design can more effectively move dr... |
 |
Drill Bits Application In The Water Well Industry | During the construction of a water well drilling rig, the drill bit is mainly used to break the rock, and the quality of the drill bit directly aff... |
 |
STEEL TOOTH BIT | The teeth of Steel Tooth Bit are made by milling and processing of tooth wheel blanks, mainly wedge-type teeth, and the structural parameters of th... |
 |
TCI Tricone Bit | Under the effect of the WOB and the twist of the drill string, the teeth of the tci tricone bit are crushed and eaten into the rock, and at the sam... |
 |
MATRIX PDC BIT | PDC bit is the abbreviation of Polycrystalline Diamond Compact Bit, also known as Polycrystalline Diamond Cutting Block Bit or Composite Chip Tooth... |
Same products
 |
Shoes Flexing Tester | Seller: Qinsun Instruments Co., Ltd | It's used for determining the flexibility resistance and or indicating the cracks od shoe or shoe... |
 |
Shoelace Abrasion Tester | Seller: Qinsun Instruments Co., Ltd | Application: This shoelace abrasion tester is used for shoelace against standard eyelet abrasion... |
 |
Heel Fatigue Tester | Seller: Qinsun Instruments Co., Ltd | Heel Fatigue Tester is used to determine the resistance of medium and high heels of ladies’... |
 |
Heel Impact Tester | Seller: Qinsun Instruments Co., Ltd | Heel Impact Tester is used to determine the impact strength of heels of ladies’shoes. Ap... |
 |
Ross Flex Tester | Seller: Qinsun Instruments Co., Ltd | Whole Sole ROSS Flexing Tester GT-KB05D To determine right angle flexing risistance for whole sol... |
