GF6018A CLAMP TYPE MULTIMETER CALIBRATOR
This GF6018A high precision multi-product calibrator is compliance with national verification regulation: JJG124-2005 "Ammeter, voltmeter, power meter and resistance meter verification rules" and related national standards. 0.05% single-phase standard AC/DC voltage and current source, can verify level 0.2 and the following AC/DC voltmeter, ammeter, frequency meter, resistance meter & clamp meter. The source signals by using DSP and 16-bit high-speed A/D converters of controllable sine wave, the distorted wave signal source. Multifunction calibrator GF6018A is designed as universal calibration tool for electrical calibration laboratories.
APPLICATION
■ Power plant;
■ Universities;
■ Panel manufacturer;
■ Research institutes;
■ Electrical testing center;
■ Multimeter manufacturers;
■ Oscilloscope manufacturer;
■ Clamp meter manufacturers;
■ Digital meter manufacturers;
■ ISO17025 Electrical laboratory;
■ Electricity power bureau & power company;
■ Power engineering commissioning company;
■ Electrical Department of industrial and mining enterprises;
FEATURES
■ With 200A, 600A, 1000A calibration coil;
■ High precision AC/DC voltage source & current source;
■ Because of light weight, this device is more suitable for field use;
■ With RS-232 interface, this calibrator is controlled by PC software(optional;
■ Automatic or manual inspection, and the results are processing and management;
■ Has a non-volatile memory, Storage 500groups of the test data, for access and upload;
■ It can be semi-automatic or manual inspection of analog multimeter, clamp type current meter, all kinds of electric meter, (voltmeter, ammeter, frequency meters, resistance meter) basic error;
■ The calibrator can be generated with 2-31 harmonic wave, harmonic number, order, amplitude and harmonic phase of fundamental wave can be programmed;
■ Power amplifier working frequency range is 40Hz-1KHZ, has a good linear. Current amplifier is constant current source; voltage amplifier is constant voltage source;
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
D50: hall effect high linearity 0.1% 1000A AC/DC current clamp | The Model D50 AC/DC hall effect current clamp is a portable 500A/1000Arms current probe with insulated BNC output cable that can accurately measure... |
|
|
GF6018A CLAMP TYPE MULTIMETER CALIBRATOR | This GF6018A high precision multi-product calibrator is compliance with national verification regulation: JJG124-2005 "Ammeter, voltmeter, power me... |
 |
Прибор с однофазным счётчиком | GF112D является 0,05, 0,1 или 0,2, Из-за того, что вы сказали, что у вас проблемы с самооценкой? И я не могу просто так взять и уйти. apparent powe... |
 |
GF6018A CLAMP TYPE MULTIMETER CALIBRATOR | This GF6018A high precision multi-product calibrator is compliance with national verification regulation: JJG124-2005 "Ammeter, voltmeter, power me... |
 |
FQ-RCTA02: ROGOWSKI coil 3000A flexible current sensor with integrator | The FQ-RCTA02 rogowski coil flexible current sensor is designed for easy installed in tight spaces and without the need for dismantling the primary... |
Похожие товары
 |
GF6018A CLAMP TYPE MULTIMETER CALIBRATOR | Продавец: 782364 | This GF6018A high precision multi-product calibrator is compliance with national verification reg... |
 |
GF6018A CLAMP TYPE MULTIMETER CALIBRATOR | Продавец: 782364 | DESCRIPTIONThe GF6018A clamp type multimeter calibrator with RS-232 port, it can be connected w... |
 |
GF6018A CLAMP TYPE MULTIMETER CALIBRATOR | Продавец: 782364 | This GF6018A high precision multi-product calibrator is compliance with national verification reg... |
 |
GF6018A CLAMP TYPE MULTIMETER CALIBRATOR | Продавец: 782364 | APPLICATION ■ Power plant; ■ Universities; ■ Panel manufacturer; ■ Research institutes; ■ Electr... |
 |
GF6018A CLAMP TYPE MULTIMETER CALIBRATOR | Продавец: 782364 | This GF6018A high precision multi-product calibrator is compliance with national verification reg... |
