Sintered Iron Bearing
Sintered bearing, also named oil impregnated bearing, is made by powder metallurgy technology, which is pressed by the mould and do sintering, coining, then it will be soaked in the lubricating oil in vacuum, it is porous structure, and oil impregnated. Advantage:1.Self-lubricating and maintenance-free2.Corrosion resistant and wear resistant3.Good thermal conductivity4.Suitable for dry and oil-free working condition5.High production efficiency and cost effective Sintered iron bearing Density: 5.6 - 6.5 g/cm³Oil content: 18 - 25% Sintered copper bearing Density: 6.2 – 7.4 g/cm³Oil content: 12 - 30% U.S. MPIF 35-2007 Material Standard for PM Self-lubracating BearingDesignation CodeDesignation CodeCT-1000-K19FC-0303-K10CT-1000-K26FC-0303-K12CT-1000-K37FC-0308-K16CT-1000-K40FC-0308-K22CTG-1001-K17FC-0200-K20CTG-1001-K23FC-0200-K34CTG-1001-K30FC-1000-K20CTG-1001-K34FC-1000-K30CTG-1004-K10FC-1000-K40CTG-1004-K15FC-2000-K25FCTC-3604-K16FC-2000-K30FCTC-3604-K22FC-2000-K40FCTC-3806-K14FC-0205-K20FCTC-3806-K22FC-0205-K35F-0000-K15FC-0208-K25F-0000-K23FC-0208-K40F-0005-K20FC-0508-K35F-0005-K28FC-0508-K46F-0008-K20FC-2008-K44F-0008-K32FC-2008-K46 U.S. MPIF 35-2007 Material Standard for PM Structural PartsDesignation CodeDesignation CodeDesignation CodeF-0000-10FC-0205-35FC-0808-45F-0005-15FC-0205-40FC-1000-20F-0005-20FC-0205-60HTFN-0200-15F-0005-25FC-0205-70HTFN-0200-20F-0005-50HTFC-0205-80HTFN-0205-20F-0005-60HTFC-0208-30FN-0205-25F-0008-20FC-0208-40FN-0205-80HTF-0008-25FC-0208-50FN-0205-105HTF-0008-30FC-0208-50HTFN-0208-30F-0008-55HTFC-0208-65HTFN-0208-35F-0008-65HTFC-0208-80HTFN-0208-80HTF-0008-75HTFC-0505-30FN-0208-105HTFC-0200-15FC-0505-40FN-0405-80HTFC-0200-18FC-0505-50FN-0405-105HTFC-0200-21FC-0508-40FN-0408-34FC-0200-24FC-0508-50FN-0408-45FC-0205-30FC-0508-60
Другие товары поставщика
|
|
|
Brief Introduction of oil pump vane rotor The vane rotor is used for rotary vane pump,Website:, positive-displacement pump, which consists of the ... |
|
|
|
Brief IntroductionOil pump stator is a basic component of oil pump, which co-work with the inner rotor or gear.We manufactured it by sintering (Po... |
|
|
|
Shock absorber signal wheel is made by powder pressing and sintering (Powder Metallurgy) technology, then do black steam oxidation as per surface t... |
|
|
|
Shock absorber base valve is made by powder pressing and sintering (Powder Metallurgy) technology, then do black steam oxidation as per surface tre... |
|
|
|
Sintered bearing, also named oil impregnated bearing, is made by powder metallurgy technology, which is pressed by the mould and do sintering, coin... |
Все товары поставщика
Похожие товары
