Sintered Iron Bearing
Sintered bearing, also named oil impregnated bearing, is made by powder metallurgy technology, which is pressed by the mould and do sintering, coining, then it will be soaked in the lubricating oil in vacuum, it is porous structure, and oil impregnated. Advantage:1.Self-lubricating and maintenance-free2.Corrosion resistant and wear resistant3.Good thermal conductivity4.Suitable for dry and oil-free working condition5.High production efficiency and cost effective Sintered iron bearing Density: 5.6 - 6.5 g/cm³Oil content: 18 - 25% Sintered copper bearing Density: 6.2 – 7.4 g/cm³Oil content: 12 - 30% U.S. MPIF 35-2007 Material Standard for PM Self-lubracating BearingDesignation CodeDesignation CodeCT-1000-K19FC-0303-K10CT-1000-K26FC-0303-K12CT-1000-K37FC-0308-K16CT-1000-K40FC-0308-K22CTG-1001-K17FC-0200-K20CTG-1001-K23FC-0200-K34CTG-1001-K30FC-1000-K20CTG-1001-K34FC-1000-K30CTG-1004-K10FC-1000-K40CTG-1004-K15FC-2000-K25FCTC-3604-K16FC-2000-K30FCTC-3604-K22FC-2000-K40FCTC-3806-K14FC-0205-K20FCTC-3806-K22FC-0205-K35F-0000-K15FC-0208-K25F-0000-K23FC-0208-K40F-0005-K20FC-0508-K35F-0005-K28FC-0508-K46F-0008-K20FC-2008-K44F-0008-K32FC-2008-K46 U.S. MPIF 35-2007 Material Standard for PM Structural PartsDesignation CodeDesignation CodeDesignation CodeF-0000-10FC-0205-35FC-0808-45F-0005-15FC-0205-40FC-1000-20F-0005-20FC-0205-60HTFN-0200-15F-0005-25FC-0205-70HTFN-0200-20F-0005-50HTFC-0205-80HTFN-0205-20F-0005-60HTFC-0208-30FN-0205-25F-0008-20FC-0208-40FN-0205-80HTF-0008-25FC-0208-50FN-0205-105HTF-0008-30FC-0208-50HTFN-0208-30F-0008-55HTFC-0208-65HTFN-0208-35F-0008-65HTFC-0208-80HTFN-0208-80HTF-0008-75HTFC-0505-30FN-0208-105HTFC-0200-15FC-0505-40FN-0405-80HTFC-0200-18FC-0505-50FN-0405-105HTFC-0200-21FC-0508-40FN-0408-34FC-0200-24FC-0508-50FN-0408-45FC-0205-30FC-0508-60
Other supplier products
|
|
Sintered Copper Bearing |
Sintered bearing, also named oil impregnated bearing, is made by powder metallurgy technology, which is pressed by the mould and do sintering, coin... |
|
|
Shock Absorber Rod Guide |
Shock absorber rod guide is made by powder pressing and sintering (Powder Metallurgy) technology.Some types will be inserted red PTFE DP4 sliding b... |
|
|
Shock Absorber Signal Wheel |
Shock absorber signal wheel is made by powder pressing and sintering (Powder Metallurgy) technology, then do black steam oxidation as per surface t... |
|
|
Oil Pump Vane |
Brief introduction of oil pump vaneOil pump vane is made of bearing steel Gcr15(AISI 52100), we cut the steel sheet to little plates by laser. Then... |
|
|
Shock Absorber Piston |
Shock absorber piston is made by powder pressing and sintering (Powder Metallurgy) technology.We will do the black steam oxidation and cover the ou... |
All supplier products
Same products
